25.140 手持工具 标准查询与下载
共找到 55 条与 手持工具 相关的标准，共 4 页
本标准规定了手动套筒扳手套筒与附件的检验规则、包装和标志等内容。 本标准适用于装拆六角螺栓和螺母的手动套筒扳手的套筒与附件。
Inspection, packaging and marking for hand operated socket wrenches
- ICS
- 25.140
- CCS
- J47
- 发布
- 1989-12-29
- 实施
- 1990-07-01
本标准规定了螺钉旋具的试验方法。其中包括试验原理、条件、步骤等要求。 本标准适用于螺钉旋具的试验。
Screwdrivers--Test methods
- ICS
- 25.140
- CCS
- J47
- 发布
- 1989-03-31
- 实施
本标准规定了铜合金工具材料的三种防爆性能试验方法。1区危险场 本标准适用于在煤矿、油田、油库、工厂、船舶、车辆、飞机等等爆炸性气体环境中所使用的防爆用铜合金工具（统称防爆工具）。
Testing methods of copper alloy tools for explosive atmospheres
- ICS
- 25.140
- CCS
- J47
- 发布
- 1989-03-31
- 实施
- 1989-12-01
本标准适用于钳工锉、锯锉、整形锉、异形锉、钟表整形锉、特殊钟表锉、木锉。
Classification and numbering regulations of files
- ICS
- 25.140
- CCS
- J47
- 发布
- 1986-01-21
- 实施
本标准适用于钳工锉、锯锉、整形锉、异形锉、钟表整形锉、特殊钟表锉、木锉的检验及标志与包装。
Test regulations marking and packaging of files
- ICS
- 25.140
- CCS
- J47
- 发布
- 1986-01-21
- 实施
本标准适用于钳工锉、锯锉、整形锉、异形锉、钟表整形锉、特殊钟表锉、木锉。
Test methods of files
- ICS
- 25.140
- CCS
- J47
- 发布
- 1986-01-21
- 实施
本标准适用于手工具的包装、标志、运输与贮存。
Packaging,marking,transportation and storage of hand tools
- ICS
- 25.140
- CCS
- J47
- 发布
- 1985-08-16
- 实施
- 1986-03-01
"Safety of Handheld Power Tools Part II: Special Requirements for Stone Cutting Machines" National Standard No. 1 Amendment
- ICS
- 25.140
- CCS
- K64
- 发布
- 实施
- 2010-03-01
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders (First edition)
- ICS
- 25.140
- CCS
- K64
- 发布
- 2021-01-01
- 实施
IEC 60745-2-23:2012 applies to die grinders and small rotary tools for mounted accessories not exceeding 55 mm in diameter and mounted sanding accessories not exceeding 80 mm in diameter such as, threaded cones or plugs that are threaded on a mandrel with an unrelieved shoulder flange, mandrel mounted wheels and rotary files with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity. This part 2 is to be used in conjunction with the latest edition of IEC 60745-1 and its amendments. It was established on the basis of the fourth edition (2006) of that standard. This standard does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory. Those tools are covered by IEC 60745-2-3. Keywords: Die grinders, rotary tools, grinding, sanding.
Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
- ICS
- 25.140
- CCS
- 发布
- 2013-12-31
- 实施
1 Domaine d’application L’article de la Partie 1 est applicable avec l’exception suivante: 1.1 Addition: La présente norme s'applique aux taille-haies conçus pour être utilisés par un opérateur, pour tailler les haies et les arbustes et comportant une ou plusieurs lames de coupe droites à vaet- vient. La présente norme n’est pas applicable aux taille-haies à lames rotatives.
Motor-driven power tools — Safety — Part 2-15: Particular rules for hedge trimmers
- ICS
- 25.140
- CCS
- 发布
- 2010-06-28
- 实施
1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade.
Hand-held motor operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers
- ICS
- 25.140
- CCS
- 发布
- 2010-06-28
- 实施
本标准规定了电动工具换向器的基本参数、技术要求、试验方法和检验规则等。 本标准适用于一般环境条件下使用的电动工具换向器。
Commutator for electric tools
- ICS
- 25.140
- CCS
- K64
- 发布
- 2006-12-31
- 实施
- 2007-07-01
NASM17989, "PIN, QUICK, RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING "L" HANDLE", was adopted on 21 JUNE 1999 for use by the Departmento f Defense (DoD). Proposed changes by DoD Activitiemsu st be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document OrdeDre sk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Governmeangte ncies may purchasec opies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.
Pin, quick release, self-retaining, positive locking, double acting,"L" handle
- ICS
- 25.140
- CCS
- J47
- 发布
- 1999-06-01
- 实施
NASM17988, "PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, "T" HANDLE, was adopted on 20 MARCH 2000 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center Philadelphia, A"N: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 191 11-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 1 1-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, WC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924
Pin, quick release, self-retaining, positive locking, double acting,"T" handle
- ICS
- 25.140
- CCS
- J47
- 发布
- 1999
- 实施
Clamp, Instrument Mounting, Aircraft FSC 5340
Clamp, Instrument Mounting, Aircraft
- ICS
- 25.140
- CCS
- J47
- 发布
- 1998-04-01
- 实施
NASMl7986, "PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING "L" HANDLE", was adopted on 30 NOVEMBER 1998 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.
Pin, quick release, self-retaining, positive locking, single acting,"L" handle
- ICS
- 25.140
- CCS
- J47
- 发布
- 1998
- 实施
Clamp, Loop-Aluminum, Plain and Cushioned FSC 5340
Clamp, Loop-Aluminum, Plain and Cushioned
- ICS
- 25.140
- CCS
- J47
- 发布
- 1998
- 实施
USE OF OR RELUNCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY AIA DOES NOT QUALIFY SUPPLIERS OR :ERTiFY CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS. UTABILITY OF ITEMS FOR
Clamp, Loop-Steel, Plain and Cushioned
- ICS
- 25.140
- CCS
- J47
- 发布
- 1998
- 实施
Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned FSC 5340
Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned
- ICS
- 25.140
- CCS
- J47
- 发布
- 1998
- 实施
