25.140.01 手持工具综合 标准查询与下载

GSO ISO 2351-3:2008 螺钉和螺母组装工具 机用螺丝刀螺纹 第3部分：内六角螺丝刀螺纹

This part of ISO 2351 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers as defined in ISO 2936. It also gives recommended combinations between tips and bits

Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws

GSO ISO 2725-3:2008 螺钉和螺母装配工具 方形驱动套筒 第3部分：机器操作套筒（“非冲击”） 尺寸

This part of ISO 2725 specifies dimensions , designation and marking of machine operated "non-impact" square drive sockets. NOTE 1 : Machine operated "non-impact" square drive sockets are listed under number 301 in ISO 1703:1993 NOTE 2 : Hand operated sockets are dealt with in ISO 2725-1. Machine-operated "impact" sockets are dealt with in ISO 2725-2 .

Assembly tools for screws and nuts – Square drive sockets – Part 3: Machine-operated sockets (“non-impact”) – Dimensions

BS ISO 2351-1:2007 螺钉和螺母用装配工具.机器驱动旋具头.一字槽头螺钉用旋具头

This part of ISO 2351 prescribes the technical specifications for machine-operated screwdriver bits for slotted head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers Type C as defined in ISO 2380-1. It also gives recommended combinations between tips and bits. NOTE Machine-operated screwdriver bits are listed under number 3 2 04 01 0 in ISO 1703.

Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws

GSO ISO 2380-1:2007 螺钉和螺母拧紧工具 一字螺丝刀 第1部分：使用手动和自动螺丝刀的提示

This part of ISO 2380 specifies the shape/form, dimensions and designation of the tips of hand- and machineoperated screwdrivers for slotted-head screws. It also gives the technical specifications and test conditions for the screw-drivers and, in the case of hand-operated screwdrivers, specifies the test torque which the blade-tohandle connection shall withstand.

Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers

GSO ISO 1703:2007 螺钉和螺母的装配工具 名称和术语

This International Standard gives a nomenclature in English and French of assembly tools for screws and nuts. NOTE In addition to terms used in English and French, two of the three official ISO languages, this International Standard gives the equivalent terms in German, Italian, Spanish and Swedish; these are published under the responsibility of the member bodies for Germany (DIN), Italy (UNI), Spain (AENOR) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.

Assembly tools for screws and nuts - Designation and nomenclature

GSO ISO 2380-2:2007 螺钉和螺母紧固工具 用于开槽头螺钉 第2部分：一般要求 手用螺丝刀的钻头长度和编号

This part of ISO 2380 specifies the general requirements, lengths of blades and the marking of hand-operated screwdrivers for slotted-head screws as specified in ISO 4759-1. The blade tips are specified in ISO 2380-1.

Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers

GSO ISO 1174-2:2007 螺钉和螺母紧固件 驱动方头 第2部分：用于电气插座工具的驱动方头

This part of IS0 1174 specifies the dimensions and designation of driving squares for power socket tools. Driving squares for hand socket tools are dealt with in IS0 1174-I.

Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools

SAE AS59158-2007 插入和提取螺旋线圈螺纹插入件尺寸和火花塞尺寸的工具

This SAE Aerospace Standard (AS) describes taps, thread plug gages, inserting tools, expanding tools, offset and staking tools, tang break-off tools, extracting tools and thread repair kits. These tools are used for inserting and extracting helical coil wire screw thread inserts as listed in Section 2, into threaded holes in accordance with NASM33537 and MS9071.

Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes

NF E74-363-2:2007 螺钉和螺母用装配工具.方形驱动套筒.第2部分:机器驱动套筒(冲击)

Assembly tools for screws and nuts - Square drive sockets - Part 2 : machine-operated sockets ("impact").

NF E74-381-1:2007 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套管

Assembly tools for screw and nuts - Technical specifications - Part 1 : hand-operated wrenches and sockets.

ISO 1711-1:2007 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒

This part of ISO 1711 specifies minimum values for Rockwell hardness and torsional strength for hand-operated wrenches and sockets. It covers the following three series of torsion torques. ⎯ Series A: usual box wrenches and socket wrenches EXAMPLE Reference nos. 1 1 02 01 0; 1 1 02 02 0 and 1 1 02 02 1; 1 1 02 03 0; 1 1 02 04 0; 1 1 02 05 0; 1 1 02 06 0; 1 1 02 09 0; 1 1 02 10 0; 1 1 02 11 0; 1 1 02 12 0; 1 1 02 13 0 and 1 1 02 13 1; 1 1 02 14 0; 1 1 02 15 0; 1 1 08 01 0; 1 1 08 02 0. ⎯ Series C: open end wrenches EXAMPLE Reference nos. 1 1 01 01 0; 1 1 01 01 1; 1 1 01 02 0; 1 1 01 03 0; 1 1 01 04 0. ⎯ Series E: hand-operated square drive sockets EXAMPLE Reference nos. 2 1 02 01 0 and 2 1 02 01 1. NOTE The wrenches and sockets mentioned above are listed under their respective reference numbers in ISO 1703.

Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets

ISO 2351-1:2007 螺钉和螺母用装配工具.机动旋具头.第1部分:一字槽头螺钉用旋具头

This part of ISO 2351 prescribes the technical specifications for machine-operated screwdriver bits for slotted head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers Type C as defined in ISO 2380-1. It also gives recommended combinations between tips and bits. NOTE Machine-operated screwdriver bits are listed under number 3 2 04 01 0 in ISO 1703.

Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws

ISO 2725-2:2007 螺钉和螺母用装配工具.方头钻动扳手.第2部分:机动扳手尺寸

This part of ISO 2725 specifies dimensions, the designation and the marking of machine-operated “impact” square drive sockets with operating end having a hexagonal or double hexagonal form in accordance with ISO 1174-2. Hand-operated sockets are dealt with in ISO 2725-1. NOTE 1 Machine-operated “impact” square drive sockets are listed under number 2 2 02 01 0 in ISO 1703. NOTE 2 The figures in this part of ISO 2725 are given only as examples. They are not intended to influence the manufacturer's design.

Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact")

GOST R 52785-2007 凹槽螺钉与木螺钉固定与装配用螺丝刀.工作件.尺寸规格

Screwdrivers for fitting and assembling for recessed screws and wood screws. Working part. Dimensions

JB/T 5133-2006 凿岩机械与气动工具 压铸镁合金铸件通用技术条件

本标准规定了凿岩机械与气动工具压铸镁合金铸件的类别及级别、基本尺寸、公差等级、理化检验、铸造斜度、压铸螺纹、形状及位置公差等通用要求。 本标准适用于凿岩机械与气动工具压铸镁合金铸件（以下简称压铸件）。

General specifications of cast of magnesium die casting alloy of rock drilling machines and pneumatic tools

JB/T 5131-2006 气镐用镐钎

本标准规定了气镐用镐钎的型式与尺寸、技术要求、验收规则、标记和标志、包装、运输与贮存。 本标准适用于气镐用镐钎的设计、制造、验收与使用。

Pick-rods for pneumatic picks

JB/T 5132-2006 气动捣固机用捣头

本标准规定了气动捣固机用捣头的型式与尺寸、技术要求、验收规则、标记和标志、包装、运输与贮存。 本标准适用于气动捣固机用捣头（以下简称捣头）的设计、制造、验收与使用。

Tamping butts for pneumatic tampers

JB/T 5134-2006 气铲用铲头

本标准规定了气铲用铲头的型式与尺寸、技术要求、验收规则、标记和标志、包装、运输与贮存。 本标准适用于气铲用铲头（以下简称铲头）的设计、制造、验收与使用。

Chiselles for pneumatic chipping hammers

BS DD ISO/TS 21108:2006 手持式动力工具.脉冲扳手.电插座接口的尺寸和公差

Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket

NF E74-381-2:2006 螺钉和螺母用装配工具.技术规范.第2部分:机器驱动套筒(冲击)

Assembly tools for screws and nuts - Technical specifications - Part 2 : machine-operated sockets ("impact").