25.140.10 气动工具 标准查询与下载

ISO 11148-8:2011 手持非电动工具.安全性要求.第8部分:砂轮磨光机和抛光机

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers

ISO 11148-5:2011 手持非电动工具.安全性要求.第5部分:旋转敲击动力钻

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

ISO 11148-2:2011 手持非电动工具.安全性要求.第2部分:切割和拆边工具

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools

ISO 11148-1:2011 手持非电动工具.安全性要求.第1部分:无螺纹机械紧固件的组装动力工具

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners

GSO ISO 11148-10:2011 非电动手持式机床 安全要求 第10部分：机加工压缩工具

This standard applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid or internal combustion engines and intended to be used by one operator and supported by: - the operator's hand or hands or a suspension, e. g. a balancer. - hand-held tools which are intended to be capable of being fixtured.

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

GSO ISO 11148-11:2011 手持式非电动工具 安全要求 第11部分：冲剪机和剪刀

This standard applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid or internal combustion engines and intended to be used by one operator and supported by: - the operator's hand or hands or a suspension, e. g. a balancer. - hand-held tools which are intended to be capable of being fixtured.

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears

GSO ISO 8662-13:2011 手持式便携式机床 手柄振动测量 第13部分：微型磨床

لا يوجد

Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders

JB/T 9849-2011 气动捣固机

本标准规定了气动捣固机的基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力的气动捣固机（以下简称产品）的设计、制造、检验与使用。

Pneumatic tampers

JB/T 9848-2011 气镐

本标准规定了气镐的基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力的气镐（以下简称产品）的设计、制造、验收与使用。

Pneumatic picks

DIN EN ISO 11148-4:2011 手持非电动工具.安全性要求.第4部分:非旋转式冲击动力工具(ISO 11148-4-2010).德文版本EN ISO 11148-4-2010

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2010); German version EN ISO 11148-4:2010

DIN EN ISO 11148-3:2011 手持非电动工具.安全性要求.第3部分:钻孔器和攻丝机(ISO 11148-3-2010).德文版本EN ISO 11148-3-2010

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010); German version EN ISO 11148-3:2010

DIN EN ISO 11148-6:2011 手持非电动工具.安全性要求.第6部分:螺纹结件用装配电动工具(ISO 11148-6-2010).德文版本EN ISO 11148-6-2010

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010); German version EN ISO 11148-6:2010

EN ISO 11148-9:2011 手持非电动工具.安全性要求.模具电磨

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools fitted with collets(hereinafter “die grinders”) intended for grinding and surface finishing and chamfering using mounted points,burrs and files and small wire brushes and other accessories mounted on shanks. The die grinders can bepowered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used byone operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)

EN ISO 11148-1:2011 手持非电动工具.安全性要求.无螺纹的机械紧固件用的装配动力工具

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter“assembly power tools for non-threaded mechanical fasteners”) intended for installation, tightening or removalof both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece intometals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can bepowered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used byone operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

EN ISO 11148-2:2011 手持非电动工具.安全性要求.切割和卷边动力工

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools without rotation(hereinafter “cutting-off and crimping power tools”) intended for cutting off wires, cables, etc., and for crimping,for instance, connectors to cable ends. The cutting-off and crimping power tools can be powered bycompressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operatorand supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)

EN ISO 11148-11:2011 非电动手持工具.安全要求.第11部分:剪刀和步冲轮廓机

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter“sanders and polishers”) intended for polishing and sanding with all types of movement, e.g. rotary, orbital andreciprocating, using coated abrasive products, bonnets of various soft materials and endless belts. Thesanders and polishers can be powered by compressed air, hydraulic fluid or internal combustion engines andare intended to be used by one operator and supported by the operator's hand or hands, with or without asuspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

EN ISO 11148-10:2011 非电动手持工具.安全要求.第10部分:压缩电动工具

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter“sanders and polishers”) intended for polishing and sanding with all types of movement, e.g. rotary, orbital andreciprocating, using coated abrasive products, bonnets of various soft materials and endless belts. Thesanders and polishers can be powered by compressed air, hydraulic fluid or internal combustion engines andare intended to be used by one operator and supported by the operator's hand or hands, with or without asuspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

EN ISO 11148-5:2011 手持非电动工具.安全性要求.旋转冲击钻

This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter“rotary percussive drills”) intended for making holes in hard materials, such as rock and concrete. The rotarypercussive drills can be powered by compressed air, hydraulic fluid or internal combustion engines (ICEs) andare intended to be used by one operator and supported by the operator's hand or hands, with or without asuspension, e.g. a balancer.

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

BS EN ISO 11148-6:2010 手持式非电动工具 安全性要求 螺纹紧固件装配电动工具

This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers ? air-hydraulic impulse wrenches; ? impact wrenches; ? fastener installation tools; ? nutrunners; ? open-ended spanners (crow-foot with open-ended socket or tube nut wrench); ? ratchet wrenches; ? screwdrivers. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners

ISO 11148-3:2010 手持式非电动工具.安全要求.第3部分:钻孔机与攻丝机

IMPORTANT — The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a colour printer. ISO 3864-1 provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “drills and tappers”) intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete, plastics, etc., or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to ? drills; ? heavy duty drills with two handles; ? tappers. NOTE 1 For examples of drills and tappers, see Annex B. This part of ISO 11148 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Portable non-electric powered machines - Safety requirements - Part 3: Drilling and tapping machines (Second edition)