25.160.01 标准查询与下载

GSO ISO 9606-4:2013 焊接装置的效率测试 熔焊 第4部分：镍和镍合金

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Approval testing of welders -- Fusion welding -- Part 4: Nickel and nickel alloys

GSO ISO 9606-1:2013 焊接设备能力验证 熔焊 第1部分：钢

This part of ISO 9606 specifies the requirements for qualification testing of welders for fusion welding of steels. It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body. When qualifying welders, the emphasis is placed on the welder's ability manually to manipulate the electrode, welding torch or welding blowpipe, thereby producing a weld of acceptable quality. The welding processes referred to in this part of ISO 9606 include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes. NOTE For such processes, see ISO 14732[10].

Qualification testing of welders -- Fusion welding -- Part 1: Steels

GSO ISO 9606-2:2013 焊接装置能力验证熔焊 第2部分：铝及铝合金

This document specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys. This document provides a set of technical rules for systematic qualification of welders which are independent of product type, location and examiner/examining body. When qualifying welders, the emphasis is placed on the welder's ability to manually manipulate the welding torch and thereby produce a weld of acceptable quality. The welding processes referred to in this document include those fusion welding processes which are designated as manual or partly mechanized welding. It does not qualify fully mechanized and automated welding processes (see EN 1418 or ISO 14732).

Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys

GSO ISO 9606-3:2013 焊接装置能力验证熔焊 第3部分：铜及铜合金

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of copper. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Approval testing of welders -- Fusion welding -- Part 3: Copper and copper alloys

GSO ISO 9606-5:2013 焊接装置能力验证熔焊 第5部分：钛、钛合金、锆和锆合金

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of titanium and zirconium. This standard applies to the approval testing of welders for the fusion welding of titanium and zirconium. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved. Information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Approval testing of welders -- Fusion welding -- Part 5: Titanium and titanium alloys, zirconium and zirconium alloys

KS B ISO 15608-2013 焊接 金属材料分组系统指南

Welding－Guidelines for a metallic materials grouping system

DVS 1157 Beiblatt 2-2013 DVS课程-DVS焊接工头-气焊实操-钢材

DVS course-DVS welding foreman-gas welding practice-steel

DVS 1157 Beiblatt 3-2013 DVS课程-DVS焊接大师-练习手工电弧焊-钢材

DVS Course - DVS Welding Master - Practice Manual Arc Welding - Steel

DVS 1157 Beiblatt 4-2013 DVS课程-DVS焊接大师-练习钨极惰性气体保护焊-钢

DVS Course-DVS Welding Master-Practice Tungsten Inert Gas Shielded Welding-Steel

DIN ISO 24394:2013 航空航天设施用焊接.电焊工和焊工资格考试.金属部件的熔焊(ISO 24394-2008+Amd.1-2013)

Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components (ISO 24394:2008 + Amd. 1:2013)

DVS 1157 Beiblatt 6-2013 DVS课程-DVS焊接大师-练习金属惰性气体焊接-钢

DVS Courses - DVS Welding Master - Practice Metal Inert Gas Welding - Steel

DVS 1157 Beiblatt 5-2013 DVS课程-DVS焊接大师-练习钨极惰性气体保护焊-有色金属

DVS Course-DVS Welding Master-Practice Tungsten Inert Gas Shielded Welding-Nonferrous Metals

DVS 1157 Beiblatt 7-2013 DVS 课程 DVS 焊接工头 练习金属惰性气体焊接 有色金属

DVS course DVS welding foreman practice metal inert gas welding of non-ferrous metals

DVS 1801 Beiblatt 1-2013 湿式水下焊接对公司和人员的要求 制造商资格 认可的测试、监测和认证机构

Wet underwater welding requirements for companies and personnel Manufacturer qualifications Recognized testing, monitoring and certification body

GSO ISO 3834-4:2013 金属材料熔焊质量要求 第4部分：初始质量要求

This part of ISO 3834 defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements

GSO ISO 3834-5:2013 金属材料熔焊的质量要求 第5部分：必须符合 ISO 3834-3、3834-2 或 ISO 3834-4 质量要求的文件

This part of ISO 3834 specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4. It can only be used in conjunction with ISO 3834-2, ISO 3834-3 or ISO 3834-4.

Quality requirements for fusion welding of metallic materials -- Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4

GSO ISO/TR 3834-6:2013 金属材料熔焊质量要求 第6部分：实施ISO 3834指南

This part of ISO 3834 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.

Quality requirements for fusion welding of metallic materials -- Part 6: Guidelines on implementing ISO 3834

GSO ISO 3834-1:2013 金属材料熔焊的质量要求 第1部分：选择适当质量要求水平的标准

This part of ISO 3834 provides a general outline of ISO 3834 and criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2 [3], ISO 3834-3 [4] and ISO 3834-4 [5]. It applies to manufacturing, both in workshops and at field installation sites. NOTE 1 ISO 3834-2, ISO 3834-3 and ISO 3834-4 provide complete sets of quality requirements for process control related to all fusion welding processes (for each process separately or in combination as specified). ISO 3834-5 specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4. This part of ISO 3834 does not specify requirements for a total quality management system. However, Clause 6 identifies quality management system elements where their inclusion will complement ISO 3834. NOTE 2 ISO 3834-2, ISO 3834-3 and ISO 3834-4 may be used on their own by a manufacturer or in conjunction with ISO 9001:2000.

Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the selection of the appropriate level of quality requirements

GSO ISO 3834-3:2013 金属材料熔焊质量要求 第3部分：标准质量要求

This part of ISO 3834 defines standard quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality requirements

GSO ISO 3834-2:2013 金属材料熔焊质量要求 第2部分：综合质量要求

This part of ISO 3834 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality requirements