共找到 906 条与 相关的标准,共 61 页
Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)
Qualification testing of welders - Fusion welding - Part 1: Steels; Technical Corrigendum 1
1.0.1 为统一石油天然气和炼油化工工程建设中金属管道焊接工艺评定的方法和内容,验证拟定的焊接工艺的正确性,保证焊接接头的性能满足要求,特制定本标准。1.0.2 本标准适用于陆上石油天然气和炼油化工工程中各类金属管道的气焊(OFW)、焊条电弧焊(SMAW)、非熔化极气体保护焊(GTAW)、熔化极气体保护焊[GMAW,含药芯焊丝电弧焊(FCAW)]、埋弧焊(SAW)等及它们的组合等方法的焊接工艺评定。1.0.3 石油天然气金属管道焊接工艺评定除应符合本标准外,尚应符合国家现行有关标准规定。
Standard for welding procedure qualification of oil and gas metal pipeline
Numerical welding simulation - Execution and documentation - Part 5: Example welding residual stresses in austenitic steels
Qualification testing of welders - Fusion welding - Part 1: Steels
DVS® course for plastics laminators and adhesive bonders
DVS® Manual Laser Beam Material Processing Training Experts
This standard specifies requirements for the friction stir welding, and variants thereof, of aluminium components manufactured from aluminium. It specifies requirements particular to friction stir welding related to welding knowledge, quality need, welding procedurespecification, welding procedure approval and welding personnel.
Friction stir welding - Aluminium - Part 3: Qualification of welding operators
Oxygen-fuel gas flash arrester and combination flash arrester and back-pressure check valves
This standard specifies tasks, education and certification of welding inspectors. This standard deals with one level of certification of welding inspectors only. The qualification requirements prior to the certification are described in clause 5, and shown in figure 1. This standard specifies necessary education in order to be certified as Welding Inspector. This standard is applicable when the welding inspector certification is required by a client or a manufacturer, in a contract or in an application standard. This standard which is based on elements from EN ISO/IEC 17024, provides the basis for third-party certification.
Welding inspectors - Tasks, education and certification
This standard covers all aspects of safety and health in the welding environment, emphasizing oxygen gas and arc welding processes with some coverage given to resistance welding. It contains information on protection of personnel and the general area, ventilation, fire prevention and protection, and confined spaces. A significant section is devoted to precautionary information, showing examples, and an extensive bibliography is included.
Safety in Welding, Cutting, and Allied Processes
Quality requirements for fusion welding of metallic materials. Part 6. Guidelines on implementing ISO 3834
Specification for the Qualification of Welding Inspectors
This standard describes preparation and assessment of a fillet weld test piece. Test conditions prescribed and results required should not be considered to be requirements or expectations for a procedure qualification. This specification makes use of both US Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.
Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld
이 표준은 고압 가스 용기 속에 균등하게 충전한 다공 물질에, 용제로서 아세톤 또는 다이메
Dissolved acetylene
Qualification test of welders - Fusion welding - Part 1: Steels
The publication is a certificate to be filled out in connection with the issue of a welder's certificate based on approval test of welders in accordance with DS/EN 287-1. The approval testing is performed at welding schools with licence of certification in accordance with DS 322:2011.
Certificate for welders in accordance with DS/EN 287-1:2011 - Performed at welding school with license of certification in accordance with DS 322:2011
The publication is a certificate to be filled out in connection with the issue of a welder's certificate based on approval test of welders in accordance with DS/EN ISO 9606-2. The approval testing is performed at welding schools with licence of certification in accordance with DS 322:2011.
Certificate for welders in accordance with DS/EN ISO 9606-2:2005 - Performed at welding school with license of certification in accordance with DS 322:2011
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号