25.160.01 标准查询与下载

ASME BPVC Section 9 Addenda 2008-2008 ASME锅炉和压力容器规范.第9节:焊接和钎焊程序、电焊工、铜焊工、和焊接和钎焊操作者用合格标准.2008a补充件2008年7月1日

ASME Boiler & Pressure Vessel Code - Section 9: Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators; 2008a Addenda July 1, 2008

ANSI/AWS C1.5:2008 电阻焊接技术员认证规范

This specification establishes the requirements for qualification of Resistance Welding Technicians (RWT) employed in the welding industry. The minimum experience, examination, application, qualification, and requalification requirements and methods are defined herein. This specification is a method for technicians to establish a record of their qualification and abilities in welding industry work such as development of machine trouble shooting, processes controls, quality standards, problem solving, etc.

Specification for the Qualification of Resistance Welding Technician

DVS 1181 Beiblatt 8-2007 DVS® 焊接设计师培训课程 高级培训课程“水下技术中的焊接友好设计”主题计划

DVS® Welding Designer Training Course Advanced training course "Welding-friendly design in underwater technology" topic program

DS-håndbog 106.5:2007 焊接 第5部分：焊接程序测试

This part 5 of the handbook series on welding contains standards for welding procedure testing when welding in metallic materials (EN ISO 15614-series).

Welding - Part 5: Welding procedure testing

DVS 2948-2007 DVS® 课程 电阻压焊焊接设计师

DVS® Course Resistance Bonding Welding Designer

NF A88-121:2007 焊接协调.任务和职责

Welding coordination - Tasks and responsibilities.

DVS 1146-2007 钢筋焊工 DVS® 课程 根据 DIN EN ISO 17660 第1部分工艺 111、114、135 和 136 的钢筋焊接

DVS® course for steel bar welders according to DIN EN ISO 17660 Part 1 Welding of steel bars according to processes 111, 114, 135 and 136

DS-håndbog 106.7:2007 焊接 第7部分：焊接技术

This part 7 of the handbook series 106 on welding contains standards on the technological aspects of welding in metallic materials. The handbook is based on the 2 series of standards, DS/EN 1011-series and DS/EN ISO 9692-series.

Welding - Part 7: Welding technology

DVS-IIW/EWF 1111 Beiblatt 1-2007 国际焊工 (IS)、国际焊工 (IW) 详细的主题时间表

International Welder (IS), International Welder (IW) Detailed subject schedule

ISO 3834-5:2005/Cor 1:2007 金属材料熔焊的质量要求.第5部分:有必要声明和ISO 3834-2、ISO 3834-3或ISO 3834-4质量要求一致的文件.技术勘误1

This standard is about Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4; TECHNICAL CORRIGENDUM 1

Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4; Technical Corrigendum 1

DVS-IIW/EWF 1111-2007 国际焊工 (IS)、国际焊工 (IW) 一般信息、要求、主题概述

International Welder (IS), International Welder (IW) General information, requirements, topic overview

DS-håndbog 106.6:2007 焊接 第6部分：质量

This part 6 of the handbook series on welding contains standards for welding quality.

Welding - Part 6: Quality

LST EN ISO 14731:2007 焊接协调 任务和职责（ISO 14731:2006）

Welding coordination - Tasks and responsibilities (ISO 14731:2006)

EN ISO/TR 3834-6:2007 金属材料熔焊的质量要求.第6部分:ISO 3834标准执行指南

Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834

DVS 1112-1-2007 DVS® 课程 DVS-G-FUE/04 使用气体保护金属电弧焊和成型的接头

DVS® Course DVS-G-FUE/04 Joints Using Gas Metal Arc Welding and Forming

DVS 1112-2-2007 DVS® 课程 DVS-FUE1/04 使用手工电弧焊和热切割的接头

DVS® Course DVS-FUE1/04 Joints using manual arc welding and thermal cutting

DVS 2946 Beiblatt 1-2007 DVS® 课程 薄板金属连接测试专家 主题计划

DVS® Courses Thin Sheet Metal Joint Testing Expert Topic Program

DVS 2946-2007 DVS® 课程 薄板金属连接测试专家

DVS® Courses Experts in Sheet Metal Joint Testing

DVS 1112-3-2007 DVS® 课程 DVS-FUE2/04 使用惰性气体焊接的接头

DVS® Course DVS-FUE2/04 Joints welded with inert gas

ISO/TR 3834-6:2007 金属材料氧炔焊质量要求.第6部分:实施 ISO 3834导则

This part of ISO 3834 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.

Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834