25.160.10 焊接工艺 标准查询与下载

KS B ISO 9692-3-2019 焊接和相关工艺 - 接头制备类型 - 第3部分:铝及其合金的金属惰性气体焊接和钨惰性气体焊接

Welding and allied processes — Types of joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

EN ISO 15614-7:2019 金属材料焊接程序的规范和鉴定.焊接程序试验.第7部分:覆盖焊接

ISO 15614-7:2016 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. ISO 15614-7:2016 defines the conditions for execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. ISO 15614-7:2016 applies to all welding processes suitable for overlay welding. In situations where qualification is carried out on a pre-production test piece, the qualification is performed in accordance with ISO 15613 except that, as far as possible, the testing is according to this part of ISO 15614. Building up and repair of parent metal is covered by ISO 15613 or ISO 15614‑1. This edition of ISO 15614‑7 is applicable to all new welding procedure qualification tests. It does not invalidate previous welding procedure tests made in accordance with previous editions of this part of ISO 15614. Where additional tests are required by the present edition, it is only necessary that those additional tests be carried out on a test piece made in accordance with the existing WPS and this part of ISO 15614. If buttering is used for welding between dissimilar materials, the welding procedure is qualified in accordance with ISO 15614‑1. This buttering may be required for weld combining different material structure or properties, e.g. joining martensitic steels or ferritic steels with austenitic steels. Additional tests may be required by application standards.

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)

DB37/T 3703-2019 起重机械钢结构焊接工艺规程

Welding procedure specification for steel structure of hoisting machinery

BS EN ISO 15609-1:2019 金属材料焊接工艺规范和鉴定 焊接工艺规范 电弧焊

What is ISO 15609 ‑ 1 - Arc welding procedures for metallic materials about?   ISO 15609 series covers specification and qualification of welding procedures for metallic materials.   ISO 15609 ‑ 1 is the first part of the muti-series of documents that specifies requirements for the content of welding procedure specifications for arc welding processes. The variables listed in ISO 15609 ‑

Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding

BS EN ISO 15609-2:2019 金属材料焊接工艺规范和鉴定 焊接工艺规范-气焊

What is ISO 15609-2- Gas welding procedures for metallic materials about?   ISO 15609 series covers the specification and qualification of welding procedures for metallic materials.   ISO 15609 ‑ 2 is the second part in the multi-series of documents that specifies requirements for the content of welding procedure specifications for gas welding processes. The main objective of ISO 15609 ‑ 2 is to improve qualit...

Specification and qualification of welding procedures for metallic materials. Welding procedure specification - Gas welding

BS EN ISO 15607:2019 金属材料焊接工艺规范和鉴定 一般规则

What is this ISO 15607 about?   ISO 15607 is an International standard that defines general rules for the specification and qualification of welding procedures for metallic materials also refer to several other standards as regards detailed rules for specific applications.   ISO 15607 specifies the specification and qualification of welding procedures. enlisting a series of standards, the use of these standards, and a flow diagram for the development and qualification of Welding procedure specifications (WPS).   ISO 15607 is applicable to manual, partly mechanized, fully mechanized, and automated welding.   It is assumed that welding procedure specifications are used in production by competent welders, qualified ...

Specification and qualification of welding procedures for metallic materials. General rules

EN ISO 15607:2019 金属材料焊接程序规范和合格鉴定.总则

This document is part of a series of standards dealing with specification and qualification of welding procedures. Annex A gives details of this series of standards, Annex B gives a table for the use of these standards, and Annex C gives a flow diagram for the development and qualification of a WPS. This document defines general rules for the specification and qualification of welding procedures for metallic materials. This document also refers to several other standards as regards detailed rules for specific applications. This document is applicable to manual, partly mechanized, fully mechanized and automated welding. Welding procedures are qualified by conforming to one or more welding procedure qualification records (WPQR). The use of a particular method of qualification is often a requirement of an application standard. It is assumed that welding procedure specifications are used in production by competent welders, qualified in accordance with the relevant part of ISO 9606 or by competent operators qualified in accordance with ISO 14732.

Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)

ISO 15607:2019 金属材料焊接程序的规范和资格 - 一般规则

This document is part of a series of standards dealing with specification and qualification of welding procedures. Annex A gives details of this series of standards, Annex B gives a table for the use of these standards, and Annex C gives a flow diagram for the development and qualification of a WPS. This document defines general rules for the specification and qualification of welding procedures for metallic materials. This document also refers to several other standards as regards detailed rules for specific applications. This document is applicable to manual, partly mechanized, fully mechanized and automated welding. Welding procedures are qualified by conforming to one or more welding procedure qualification records (WPQR). The use of a particular method of qualification is often a requirement of an application standard. It is assumed that welding procedure specifications are used in production by competent welders, qualified in accordance with the relevant part of ISO 9606 or by competent operators qualified in accordance with ISO 14732.

Specification and qualification of welding procedures for metallic materials — General rules

EN ISO 15609-2:2019 金属材料的焊接程序规范和鉴定.焊接程序规范.第2部分:气焊

This document specifies requirements for the content of welding procedure specifications for gas welding processes. Details of the ISO 15609 series are given in ISO 15607. The variables listed in this document are those influencing the quality of the welded joint.

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019)

EN ISO 15609-1:2019 金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊

This document specifies requirements for the content of welding procedure specifications for arc welding processes. Details of the ISO 15609 series are given in ISO 15607. The variables listed in this document are those influencing the quality of the welded joint.

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)

BS EN ISO 15614-1:2017+A1:2019 金属材料焊接工艺规范和鉴定 焊接工艺试验 钢的电弧焊和气焊以及镍和镍合金的电弧焊

  What is ISO 15614 - W elding procedures for metallic materials about? ISO 15614  on welding procedures for metallic materials provides preliminary welding procedure tests designed to ensure that a given weld will perform as required. This part covers arc and gas welding of steels and arc welding of nickel and nickel alloys. It defines how the welding procedure test should be conducted and the range of acceptable results. Who is  ISO 15614 -   W elding procedures for metallic materials   for?    ISO 15614  on welding procedures for metallic materials can be adopted by the f abrication and manufacturing industries, especially those with critical safety requirements, includes: Structural engineering Oil and gas Energy Nuclear Pressure vessels and equipment Chemical plant Shipbuilding Why should you use  ISO 15614 -   W elding procedures for metallic materials ? Because it applies to production welding, repair welding, and build-up welding and specifies how a preliminary welding procedure specification is qualified by welding procedure tests. The main purpose is to demonstrate that the joining process proposed for construction is capable of producing joints having the required mechanical properties for the intended application. Importantly, the ISO 15614  on welding procedures for metallic materials provides two levels of test so that it has a wide range of applications. Level 2 tes...

Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys

EN ISO 15614-1:2017/A1:2019 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的焊接 包含修改件A1,2019

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019)

19/30397463 DC BS EN ISO 15614-1 AMD2 金属材料焊接工艺规范和鉴定 焊接工艺试验 第 1 部分：钢的电弧焊和气焊以及镍和镍合金的电弧焊

BS EN ISO 15614-1 AMD2. Specification and qualification of welding procedures for metallic materials. Welding procedure test - Part 1. Arc and gas welding of steels and arc welding of nickel and nickel alloys

ISO 15609-2:2019 金属材料焊接程序的规范和资格 - 焊接程序规范 - 第2部分:气焊

This document specifies requirements for the content of welding procedure specifications for gas welding processes. Details of the ISO 15609 series are given in ISO 15607. The variables listed in this document are those influencing the quality of the welded joint.

Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding

ISO 15609-1:2019 金属材料焊接工艺规范和鉴定焊接工艺规范第1部分:电弧焊接

This document specifies requirements for the content of welding procedure specifications for arc welding processes. Details of the ISO 15609 series are given in ISO 15607. The variables listed in this document are those influencing the quality of the welded joint.

Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding

ISO 15614-1:2017/Amd 1:2019 金属材料焊接工艺的规范和评定.焊接工艺试验.第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊.修改件1

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1

BS EN ISO 15620:2019 焊接 金属材料的摩擦焊接

What is ISO 15620 - Friction welding of metallic materials about?   ISO 15620 is an International Standard that discusses welding. It covers requirements for the friction welding of components manufactured from metals.   ISO 15620 specifies requirements particular to rotational friction welding related to welding knowledge, quality requirements, welding procedure specification, welding procedure approval, and welding personnel.   The main objective of ISO 15620 is to establish efficient quality management systems in the field of welding.  ...

Welding. Friction welding of metallic materials

EN ISO 15620:2019 焊接.金属材料裂缝焊接

This document specifies requirements for the friction welding of components manufactured from metals. It specifies requirements particular to rotational friction welding related to welding knowledge, quality requirements, welding procedure specification, welding procedure approval and welding personnel. This document is appropriate where a contract, an application standard or a regulatory requirement requires the demonstration of the manufacturer's capability to produce welded constructions of a specified quality. It has been prepared in a comprehensive manner to be used as a reference in contracts. The requirements given can be adopted in full or some can be deleted, if not relevant to the construction concerned.

Welding - Friction welding of metallic materials (ISO 15620:2019)

DB41/T 1825-2019 燃气用聚乙烯管道焊接工艺评定

Qualification of Welding Procedures for Polyethylene Pipelines for Gas

ISO 15620:2019 焊接 - 金属材料的摩擦焊接

This document specifies requirements for the friction welding of components manufactured from metals. It specifies requirements particular to rotational friction welding related to welding knowledge, quality requirements, welding procedure specification, welding procedure approval and welding personnel. This document is appropriate where a contract, an application standard or a regulatory requirement requires the demonstration of the manufacturer's capability to produce welded constructions of a specified quality. It has been prepared in a comprehensive manner to be used as a reference in contracts. The requirements given can be adopted in full or some can be deleted, if not relevant to the construction concerned.

Welding — Friction welding of metallic materials