25.160.20 焊接消耗品 标准查询与下载

KS B ISO 18273-2021 焊接材料 铝及铝合金焊接用焊丝、焊丝和焊条 分类

Welding consumables－Wire electrodes, wires and rods for welding of aluminium and aluminium alloys－Classification

KS B ISO 1071-2021 铸铁手工电弧焊药皮焊条 符号

Covered electrodes for manual arc welding of cast iron－Symbolization

KS B ISO 6848-2021 电弧焊与切割 非消耗钨电极 分类

Arc welding and cutting－Nonconsumable tungsten electrodes－Classification

T/SSEA 0132-2021 高锰奥氏体低温钢用焊接材料

本文件规定了高锰奥氏体低温钢用焊接材料的订货内容、技术要求、试验方法、检验标准、包装、标志和质量证明书。 本文件适用于焊接液化气体储运装置等低温压力容器用高锰奥氏体钢板时配套使用的焊条、埋弧焊丝及焊剂、药芯焊丝和氩弧焊丝。

Welding consumables for high manganese austenitic low temperature steel

prEN ISO 18274:2021 焊接材料 镍和镍合金熔焊用实心焊丝、实心带状焊条、实心焊丝和实心焊条 分类（ISO/DIS 18274:2021）

Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO/DIS 18274:2021)

BS EN ISO 17633:2018+A1:2021 焊接耗材 用于不锈钢和耐热钢气体保护和非气体保护金属电弧焊的管状药芯焊条和焊条 分类

What is ISO 17633 about?   ISO 17633 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.   ISO 17633 is a combined standard providing classification utilizing a system based upon nominal composition or utilizing a system based upon alloy type.   Note: ISO 17633 does not use pulsed current for determining the product classification.  Who is ISO 17633 for?   ISO 17633 on welding consumables is applicable to   Construction, automotive, me...

Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification

JIS Z 3321:2021 焊接用不锈钢棒、线和带状电极

Stainless steel rods, wires and strip electrodes for welding

JIS Z 3221:2021 不锈钢包覆电极

Stainless steel covered electrodes

JIS Z 3323:2021 弧焊用不锈钢管状焊丝和焊条

Stainless steel flux cored wires and rods for arc welding

BS EN ISO 8167:2021 电阻焊 压花凸焊 电阻焊投影

Resistance welding. Embossed projection welding. Projections for resistance welding

PN-EN ISO 5830-2021-07 E 电阻点焊 外螺纹电极帽（ISO 5830:1984）

Resistance spot welding -- Male electrode caps (ISO 5830:1984)

PN-EN ISO 5829-2021-07 E 电阻点焊 电极适配器，内螺纹锥度 1:10（ISO 5829:1984）

Resistance spot welding -- Electrode adaptors, female taper 1:10 (ISO 5829:1984)

GSO ISO 20168:2021 电阻焊 电极支架和电极帽的锁紧锥度

ISO 20168:2016 specifies the dimensions and tolerances for electrode holders and of spot welding electrode caps, where a locking taper is used.

Resistance welding — Locking tapers for electrode holders and electrode caps

GSO ISO 20378:2021 焊接材料 非合金钢和抗蠕变钢气焊焊条 分类

ISO 20378:2017 specifies a classification for the designation of rods for gas welding of non‑alloy and creep-resisting steels in terms of the chemical composition of the rod.

Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification

GSO ISO 17777:2021 焊接材料 铜及铜合金手工电弧焊用药皮焊条 分类

ISO 17777:2016 prescribes requirements for the classification of covered electrodes for manual metal arc welding of copper and copper alloys. It includes those chemical compositions in which the copper content exceeds that of any other element.

Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification

GSO ISO/TR 13393:2021 焊接材料 堆焊分类 显微组织

ISO/TR 13393:2009 proposes a system for classifying hardfacing microstructures deposited by fusion welding processes.

Welding consumables — Hardfacing classification — Microstructures

PN-EN ISO 20168-2021-07 E 电阻焊 电极夹和电极帽的锁紧锥度（ISO 20168:2016）

Resistance welding -- Locking tapers for electrode holders and electrode caps (ISO 20168:2016)

GSO ISO 6847:2021 焊接耗材 用于化学分析的焊接金属垫沉积

ISO 6847:2013 specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. ISO 6847:2013 applies to deposition of a weld metal pad by use of covered electrodes, wire electrodes for gas shielded metal arc welding, tubular cored electrodes for gas shielded metal arc welding and for non-gas shielded metal arc welding, tubular cored rods for gas tungsten arc welding, and wire-flux combinations for submerged arc welding. ISO 6847:2013 is applicable to welding consumables for non-alloy and fine grain steels, high strength steels, creep-resisting steels, stainless and heat-resisting steels, nickel and nickel alloys, and copper and copper alloys.

Welding consumables — Deposition of a weld metal pad for chemical analysis

DS/EN ISO 17633:2021 焊接材料“不锈钢和耐热钢的气体保护和非气体保护金属电弧焊用管状药芯焊条和焊条”分类“修正案 1（ISO 17633:2017/Amd 1:2021）

Welding consumables – Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels – Classification – Amendment 1 (ISO 17633:2017/Amd 1:2021)

PN-EN ISO 14341-2021-03 D 焊接材料 非合金钢和细晶粒钢气体保护金属电弧焊用焊丝和熔敷金属 分类（ISO 14341:2020）

Welding consumables -- Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels -- Classification (ISO 14341:2020)