25.160.20 焊接消耗品 标准查询与下载

JIS G 3503:2020 涂剂焊条焊丝用线材

Wire rods for core wire of covered electrode

UNI EN ISO 2560:2020 焊接材料 非合金钢和细晶粒钢手工金属电弧焊用药皮焊条 分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

DIN EN ISO 24034:2020 焊接耗材. 钛和钛合金熔焊用实心焊条、实心焊丝和焊条. 分类(ISO 24034-2020); 德文版 EN ISO 24034-2020

This document specifies requirements for classification of solid wire electrodes, solid wires and rods for arc welding of titanium and titanium alloys. The classification is based on their chemical composition.

Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020); German version EN ISO 24034:2020

DIN EN ISO 15792-2:2020 焊接耗材. 试验方法. 第2部分: 钢制单道和两道技术试件和试样的制备(ISO 15792-2-2020); 德文版 EN ISO 15792-2-2020

This document specifies the preparation of butt weld test pieces and specimens. The test pieces and specimens are used to determine the strength and impact properties of welded joints when testing welding consumables with single-run and two-run techniques. This document is applic

Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020); German version EN ISO 15792-2:2020

DIN EN ISO 15792-1:2020 焊接耗材. 试验方法. 第1部分: 钢、镍和镍合金全焊接金属试件和试样的制备(ISO 15792-1-2020); 德文版 EN ISO 15792-1-2020

This document specifies the preparation of test pieces and specimens for all-weld metal tests in steel, nickel and nickel alloys. The test pieces and specimens are used to determine the mechanical properties of all-weld metal where required by consumable classification standards

Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020); German version EN ISO 15792-1:2020

DIN EN ISO 14341:2020 焊接耗材. 非合金钢和细晶粒钢的气体保护金属电弧焊用焊丝与焊接熔敷金属. 分类(ISO 14341-2020); 德文版本EN ISO 14341-2020

This document specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa

Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020); German version EN ISO 14341:2020

LST EN ISO 2560:2020 焊接材料 非合金钢和细晶粒钢手工金属电弧焊用药皮焊条 分类（ISO 2560:2020）

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)

LST EN ISO 15792-1:2020 焊接材料 测试方法 第1部分：钢、镍和镍合金中全焊接金属试件和试样的制备（ISO 15792-1:2020）

Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)

LST EN ISO 6847:2020 焊接耗材 用于化学分析的焊接金属垫的沉积（ISO 6847:2020）

Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)

LST EN ISO 14341:2020 焊接耗材 非合金钢和细晶粒钢的气体保护金属电弧焊用焊丝和熔敷金属 分类（ISO 14341:2020）

Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)

LST EN ISO 15792-2:2020 焊接耗材 测试方法 第2部分：单次和两次技术测试件和钢试样的制备（ISO 15792-2:2020）

Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)

UNI EN ISO 24034:2020 焊接材料 钛和钛合金熔焊用实心焊丝、实心焊丝和焊条 分类

Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification

UNI EN ISO 6847:2020 焊接耗材 用于化学分析的焊缝金属垫的沉积

Welding consumables - Deposition of a weld metal pad for chemical analysis

LST EN ISO 24034:2020 焊接材料-钛和钛合金熔焊用实心焊丝、实心焊丝和焊条-分类（ISO 24034:2020）

Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)

BS EN ISO 15792-1:2020 焊接耗材 试验方法钢、镍和镍合金全焊缝金属试件和样品的制备

What is   ISO 15792-1   about? ISO 15792-1  is the first part of multi-series international standards that covers various test methods of   welding consumables. ISO 15792-1   specifies the preparation of test pieces and specimens for all-weld metal tests in steel, nickel, and nickel alloys. It should be noted that the mechanical properties of all-weld metal test specimens used to classify welding consumables can differ from those produced in production joints due to welding method variables such as electrode diameter, weave width, welding position, and material composition. Note:   ISO 15792-1   is not applicable to single- or two-run welding or fillet welding. For these cases,   ISO 15792-2  and   ISO 15792-3   apply. Who is

Welding consumables. Test methods - Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys

BS EN ISO 24034:2020 焊接耗材 钛及钛合金熔焊用实心焊丝、实心焊丝和焊条 分类

What is ISO 24034 about?   ISO 24034 is an international standard that covers the health and safety in welding and allied processes .   ISO 24034 specifies requirements for the classification of solid wire electrodes, solid wires, and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical composition.   ISO 24034 describes the compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire electrodes, solid wires, and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beam welding, and another fusion wel...

Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification

BS EN ISO 15792-2:2020 焊接耗材 试验方法 钢中单次和两次技术试件和样品的制备

What is ISO 15792-2 about?   ISO 15792-2 is the second part of an international multi-series standard that covers various test methods of welding consumables.     ISO 15792-2 specifies the preparation of butt weld test pieces and specimens. The test pieces and specimens are used to determine the strength and impact properties of welded joints when testing welding consumables with single-run and two-run techniques.   ISO 15792-2 gives technical specifications carrying out test methods such as general requirements, test plate material, preparation of the test piece, welding conditions, heat treatment, position of specimens, specimen dimensions, and testing for welding consumables.   Note 1: 15792-2 is applicable to welding consumables for arc welding of steel.  Note 2: 15792-2 is not suitable for electro-slag or electro-gas welding.  Who is ISO 15792-2

Welding consumables. Test methods - Preparation of single-run and two-run technique test pieces and specimens in steel

BS EN ISO 2560:2020 焊接耗材 用于非合金钢和细晶粒钢手工金属电弧焊的药皮焊条 分类

What is ISO 2560 about?   ISO 2560 specifies requirements for the classification of covered electrodes and deposited metal in the as-welded condition and the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.   ISO 2560 is combined with specification providing for classification utilizing a system based on the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based on the tensile strength and the average impact energy of 27 J of all-weld metal.   BS EN ISO 2560 recognizes that there are two somewhat different approaches in the global market to classifying a given electrode and gives recommendations on either type of electrode to be used to suit a particular market need.   Who is ISO 2560 for?   ISO 2560

Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification

BS EN ISO 6847:2020 焊接耗材 用于化学分析的焊接金属垫沉积

What is   ISO 6847   about? ISO 6847   is an international standard that covers specifications for welding consumables.   ISO 6847   specifies the procedure to be used for the deposition of a weld metal pad for chemical analysis. ISO 6847   applies to deposition of a weld metal pad by use of covered electrodes, wire electrodes for gas shielded metal arc welding, tubular cored electrodes for gas shielded metal arc welding and for non-gas shielded metal arc welding, solid rods and tubular cored rods for gas tungsten arc welding, and wire-flux and strip-flux combinations for submerged arc welding or electroslag welding and cladding. Note 1:   ISO 6847   is   applicable to welding consumables for non-alloy and fine grain steels, high strength steels, creep-resisting steels, stainless and heat-resisting steels, nickel and nickel alloys, and copper and copper alloys. Who is   ISO 6847   for? ISO 6847

Welding consumables. Deposition of a weld metal pad for chemical analysis

BS EN ISO 14341:2020 焊接耗材 非合金钢和细晶粒钢气体保护金属电弧焊的焊丝和熔敷焊缝 分类

What is ISO 14341 about?   ISO 14341 is a series of documents that specifies the requirements for wire electrodes and weld deposits in the as welded and post-weld heat-treated conditions for gas shielded metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. With different shielding gases, a single wire electrode can be tested and classified.   ISO 14341 comprises a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. Who is ISO 14341 for?   ISO 14341 on welding consumables applicable to:

Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification