25.200 热处理 标准查询与下载
共找到 228 条与 热处理 相关的标准，共 16 页
Test code of vacuum heat treatment furnace
- ICS
- 25.200
- CCS
- 发布
- 1999-12-31
- 实施
本标准规定了有机物水溶性淬火介质性能测定方法。 本标准适用于有机物水溶性淬火介质技术性能的测定。
Test method of characteristics on polymer quenchants
- ICS
- 25.200
- CCS
- J36
- 发布
- 1999-06-24
- 实施
- 2000-01-01
本标准规定了真空热处理设备的特殊要求，真空热处理常用金属材料，真空热处理的工艺过程及其基本工艺参数。 本标准适用于金属的真空淬火、真空回火、真空退火、真空固溶热处理及真空时效等工艺。
Vacuum heat treatment
- ICS
- 25.200
- CCS
- J36
- 发布
- 1999-06-24
- 实施
- 2000-01-01
この規格は，金属熱処理設備(以下，熱処理設備という。）の有効加熱带の試験方法について規定する。プラズマ熱処理加熱設備の有効処理带試験方法については，附属書1による。加熱設備の保持温度許容差は，附属2，有効加熱带及び有効処理帯の判定方法は，附属書3による。
Heat treatment furnaces of metals -- Test methods of effective working zone and effective treating zone
- ICS
- 25.200
- CCS
- J36
- 发布
- 1998-03-20
- 实施
The document describes methods of heat treatment and gives notices for nitriding and nitrocarburizing.
Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing
- ICS
- 25.200
- CCS
- J36
- 发布
- 1998-01
- 实施
本标准规定了热喷涂热障涂层的技术要求、检验方法和验收规则。 本标准适用于热喷涂热障涂层的质量检验。
Thermal spray thermal barrier coating quality inspection
- ICS
- 25.200
- CCS
- J36
- 发布
- 1996-09-13
- 实施
- 1996-10-01
This document describes methods of heat treatment and gives notices.
Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
- ICS
- 25.200
- CCS
- J36
- 发布
- 1994-10
- 实施
The purpose of this European Standard is: 1 To define the terms in the ferrous products heat treatment vocabulary. These terms are divided into a main part (3.2) and a complementary section (3.3) - the main part gives an alphabetical list of the terms with their definitions and, where appropriate, comments. Definitions of foreign terms for which the language in question has no equivalents are given at the end of the main part under their reference number; - the complementary section comprises the definitions of terms necessary to understand the main part. NOTE. The comments are printed in italics in order to differentiate them from the definitions. Any term defined in the main part of this European Standard and used elsewhere in a definition or a comment is printed in capital letters. The reference numbers given with each term are identical in all the versions and correspond to the French alphabetical order. In order to avoid any confusion, the numbers of the terms in the annex are preceded by the letter A. Clause 3.1 gives the terms in numerical order. 2 To facilitate translations using the tables of equivalent terms. Table 1 gives the equivalent French and German terms for the English terms in the alphabetical list.
Vocabulary of heat treatment terms for ferrous products
- ICS
- 25.200
- CCS
- H40
- 发布
- 1994-01-15
- 实施
- 1994-01-15
Vocabulary of heat treatment terms for ferrous products.
- ICS
- 25.200
- CCS
- J36
- 发布
- 1994-01-01
- 实施
- 1994-01-20
Vocabulary of heat treatment terms for ferrous products; German version EN 10052:1993
- ICS
- 25.200
- CCS
- J36
- 发布
- 1994-01
- 实施
Technical conditions for quenching of turnout rail parts
- ICS
- 25.200
- CCS
- J36
- 发布
- 1993-04-22
- 实施
- 1993-10-01
Nitriding and nitrocarburizing of iron and steel
- ICS
- 25.200
- CCS
- J36
- 发布
- 1993-03-01
- 实施
- 1993-03-01
The purpose of This European Standard is:1.1 To define the terms in the ferrous products heat treatment vocabulary
Vocabulary of Heat Treatment Terms for Ferrous Products
- ICS
- 25.200
- CCS
- 发布
- 1993-01-01
- 实施
本标准规定了重载齿轮完成渗碳热处理工序后进行球化退火或高温回火后的金相级别。 本标准适用于20CrMnTi、20CrMnMo、20CrNi2Mo、12CrNi3Mo、15CrNi3Mo、20Cr2Ni4等钢制重载渗碳齿轮；并且适用于渗碳层中碳含量为0.75%～1.05%C部位处的球化退火或高温回火金相组织检查。
Heavy-duty gears Metallographic examination of carburized layer after spheroidizing treatment
- ICS
- 25.200
- CCS
- J36
- 发布
- 1992-06-09
- 实施
- 1993-01-01
Determination method of nitriding layer depth of iron and steel parts
- ICS
- 25.200
- CCS
- U05
- 发布
- 1991-11-08
- 实施
- 1992-07-01
本标准适用于碳钢，低合金钢熔接后施行热处理之方法。
Post Weld Heaf Treatment
- ICS
- 25.200
- CCS
- 发布
- 1990-01-17
- 实施
- 1990-01-17
Настоящий стандарт распространяется на технологический процесс термодиффузионного упрочнения и защиты металлических изделий в синтези
Thermodiffusion strengthening and protection of metal products. General requirements for technological process
- ICS
- 25.200
- CCS
- 发布
- 1990
- 实施
- 1991-01-01
This standard describes the procedures of heat treatment and gives advances for the heat treatment of work peaces and tools made of steel.
Heat treatment of ferrous materials; heat treatment methods; case hardening
- ICS
- 25.200
- CCS
- J36
- 发布
- 1989-04
- 实施
Quenching and tempering of steel
- ICS
- 25.200
- CCS
- J36
- 发布
- 1989-03-01
- 实施
- 1989-03-01
