27.070 燃料电池 标准查询与下载
共找到 408 条与 燃料电池 相关的标准，共 28 页
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012); German version EN 62282-5-1:2012
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-07
- 实施
- 2013-07-01
"This part of IEC 62282 provides test methods for the electric/thermal and environmental performance of small stationary fuel cell power systems that meet the following criteria: ? output: nominal electric power output of less than 10 kW; ? output mode: grid-connected/independent operation or stand-alone operation with single-phase AC output or 3-phase AC output not exceeding 1 000 V@ or DC output not exceeding 1 500 V; NOTE The limit to 1 000 V comes from the definition for ""low voltage"" given in IEV 601-01-26. ? operating pressure: maximum allowable working pressure of less than 0@1 MPa (gauge) for the fuel and oxidant passages; ? fuel: gaseous fuel (natural gas@ liquefied petroleum gas@ propane@ butane@ hydrogen@ etc.) or liquid fuel (kerosene@ methanol@ etc.); ? oxidant: air. This standard covers fuel cell power systems whose primary purpose is the production of electric power and whose secondary purpose may be the utilization of by-product heat. Accordingly@ fuel cell power systems for which the use of heat is primary and the use of by-product electric power is secondary are outside the scope of this standard. All systems with integrated batteries are covered by this standard. This includes systems where batteries are recharged internally or recharged from an external source. This standard does not cover additional auxiliary heat generators that produce thermal energy."
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-07
- 实施
- 2017-08-12
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012); German version EN 62282-6-200:2012
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-05
- 实施
- 2013-05-01
IEC 62282-5-1:2012(E) covers construction, marking and test requirements for portable fuel cell power systems intended to produce electrical power. Applies to a.c. and d.c. type portable fuel cell power systems, with a rated output voltage not exceeding 6
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
- ICS
- 27.070
- CCS
- 发布
- 2013-04-02
- 实施
- 2013-04-02
IEC 62282-3-300:2012 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: - intended for electrical
Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
- ICS
- 27.070
- CCS
- 发布
- 2013-04-02
- 实施
- 2013-04-02
IEC 62282-6-200:2012 provides test methods which are required for the performance evaluation of micro fuel cell power systems for laptop computers, mobile phones, personal digital assistants, cordless home appliances, TV broadcast cameras, autonomous robo
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- ICS
- 27.070
- CCS
- 发布
- 2013-04-02
- 实施
- 2013-04-02
IEC 62282-6-100:2010(E) covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Est
Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
- ICS
- 27.070
- CCS
- 发布
- 2013-04-02
- 实施
- 2013-04-02
Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012)
- ICS
- 27.070
- CCS
- 发布
- 2013-03-29
- 实施
- 2013-03-29
IEC/TS 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
- ICS
- 27.070
- CCS
- F19
- 发布
- 2013-03-01
- 实施
Fuel cell technologies - Part 3-300: Stationary fuel cell power system - Installation (IEC 62282-3-300:2012); German version EN 62282-3-300:2012
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-03
- 实施
- 2013-03-01
Fuel cell technologies -- Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012)
- ICS
- 27.070
- CCS
- 发布
- 2013-02-15
- 实施
- 2013-02-15
Fuel cell technologies. Portable fuel cell power systems. Safety
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Fuel cell technologies -- Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012)
- ICS
- 27.070
- CCS
- 发布
- 2013-01-18
- 实施
- 2013-01-18
Fuel Cell Technologies - Part 3: Stationary Fuel Cell Power Systems - Safety
- ICS
- 27.070
- CCS
- 发布
- 2013-01-01
- 实施
Fuel cell technologies - Part 2: Fuel cell modules (IEC 62282-2:2012); German version EN 62282-2:2012
- ICS
- 27.070
- CCS
- K82
- 发布
- 2013-01
- 实施
- 2013-01-01
Fuel cell technologies -- Part 3-300: Stationary fuel cell power systems - Installation
- ICS
- 27.070
- CCS
- 发布
- 2012-12-21
- 实施
- 2012-12-21
Fuel cell technologies - Part 3-300 : stationary fuel cell power systems - Installation
- ICS
- 27.070
- CCS
- K82
- 发布
- 2012-12-01
- 实施
- 2012-12-21
Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
- ICS
- 27.070
- CCS
- K82
- 发布
- 2012-12-01
- 实施
- 2012-12-21
This part of IEC 62282 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose@ the standard covers fuel cartridges and their connector designs. Fuel type@ fuel concentration and fuel quality are also covered. This standard also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided in this standard. IEC 62282-6-100 and IEC 62282-6-200 do not cover fuel cartridge or fuel from the cartridge. IEC 62282-6-300 describes the performance test methods of fuel cartridges@ the fuel from the cartridge@ and markings to realize the interchangeability of fuel cartridges. These include performance effect of fuel cartridges@ such as fuel quality which may affect the performance of MFC power units and usable fuel volume from fuel cartridges. A MFC power system block diagram is shown in Figure 1. MFC power systems and MFC power units are defined as those wearable or easily carried by hand@ providing d.c. outputs that do not exceed 60 V and power outputs that do not exceed 240 VA. This standard covers the fuel cartridge for MFC power units and the mechanical interface of connectors between fuel cartridges and MFC power units. The main body of this standard includes methanol liquid fuel cartridges@ including methanol and water solution. Annex A shows the background used to determine the forces expected in normal operation and in foreseeable misuse. Annex B shows the example design for test fixtures for the fuel connector and fuel cartridge type tests. NOTE Liquid fuel means fuel transported from a cartridge to a MFC power unit in the liquid state@ and gas fuel means fuel transported from a cartridge to a power unit in the gaseous state.
Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
- ICS
- 27.070
- CCS
- K82
- 发布
- 2012-12
- 实施
- 2012-12-15
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety (IEC 62282-3-100:2012); German version EN 62282-3-100:2012
- ICS
- 27.070
- CCS
- K82
- 发布
- 2012-12
- 实施
- 2012-12-01
