27.070 燃料电池 标准查询与下载

GOST R 54110-2010 使用燃料加工技术的氢气发生器.第1部分.安全性

Hydrogen generators using fuel processing technologies. Part 1. Safety

GOST R 54114-2010 便携式天然气储存设备和基于金属氢化物的氢存储系统

Transportable gas storage devices and systems for storing hydrogen based on metal hydrides

GOST R 54113-2010 压缩氢表面车辆加油连接设备

Compressed hydrogen surface vehicle refuelling connection devices

IEC 105/241/DTS:2009 燃料电池技术.第7-1部分:聚合物电解质燃料电池(PEFC)的单电池测试法

Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)

JIS C 8801:2009 磷酸燃料电池功率发生系统的一般规则

This Standard specifies the fuel cell power generating systems which comply with the following items. Each component which constitutes the system is specified by the relevant detail specifications.

General rules for phosphoric acid fuel cell power generating system

IEC 62282-6-300:2009 燃料电池技术.第6-300部分:微型燃料电池动力系统.燃料元件互换性

This International Standard covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose@ the standard covers fuel cartridges and their connector designs. Fuel type@ fuel concentration and fuel quality are also covered. This standard also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided in this standard. IEC/PAS 62282-6-1 and IEC 62282-6-200 do not cover fuel cartridge or fuel from the cartridge. IEC 62282-6-300 describes the performance test methods of fuel cartridges@ the fuel from the cartridge@ and markings to realize the interchangeability of fuel cartridges. These include performance effect of fuel cartridges@ such as fuel quality which may affect the performance of MFC power units and usable fuel volume from fuel cartridges. A MFC power system block diagram is shown in Figure 1. MFC power systems and MFC power units are defined as those wearable or easily carried by hand@ providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. This standard covers the fuel cartridge for MFC power units and the mechanical interface of connectors between fuel cartridges and MFC power units. The main body of this standard includes methanol liquid fuel cartridges@ including methanol and water solution. Annex A shows the background used to determine the forces expected in normal operation and in foreseeable misuse. Annex B shows the example design for test fixtures for the fuel connector and fuel cartridge type tests. NOTE Liquid fuel means fuel transported from a cartridge to a MFC power unit in the liquid state@ and gas fuel means fuel transported from a cartridge to a power unit in the gaseous state.

Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability

SANS 62282-3-3:2008 燃料电池技术.第3-3部分:固定式燃料电池动力系统-安装

Provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems. Applies to the installation of the mentioned systems and intended for electrical connection to mains directly or with a transfer switch, f

Fuel cell technologies Part 3-3: Stationary fuel cell power systems - Installation

DIN EN 62282-6-200:2008 燃料电池技术.第6-200部分:微型燃料电池动力系统.性能试验方法

Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007); German version EN 62282-6-200:2008

DIN EN 62282-3-3:2008 燃料电池技术.第3-3部分:固定式燃料电池动力装置.安装

Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation (IEC 62282-3-3:2007); German version EN 62282-3-3:2008

LST EN 62282-3-3-2008 燃料电池技术 第 3-3 部分：固定式燃料电池电源系统 安装（IEC 62282-3-3:2007）

Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation (IEC 62282-3-3:2007)

BS EN 62282-3-3:2008 燃料电池技术.固定燃料电池动力系统.安装

This part of IEC 62282 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-1 and applies to the installation of the mentioned systems – intended for electrical connection to mains directly or with a transfer switch, – intended for a stand-alone power distribution system, – intended to provide AC or DC power, – with or without the ability to recover useful heat. This part of IEC 62282 does not cover: – fuel supply and/or fuel storage systems, – power connector to the grid, – portable fuel cell power systems, – propulsion fuel cell power systems, – APU (auxiliary power units) applications. Fuel cell power systems are divided into two categories: – Small systems. – Large systems. Definitions are given in Clause 3.

Fuel cell technologies. Stationary fuel cell power systems. Installation

LST EN 62282-6-200-2008 燃料电池技术 第 6-200 部分：微型燃料电池动力系统 性能测试方法（IEC 62282-6-200:2007）

Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007)

EN 62282-3-3:2008 燃料电池技术.第3-3部分:固定式燃料电池电力系统.安装

This part of IEC 62282 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-1 and applies to the installation of the mentioned systems – intended for electrical connection to mains directly or with a transfer switch, – intended for a stand-alone power distribution system, – intended to provide AC or DC power, – with or without the ability to recover useful heat. This part of IEC 62282 does not cover: – fuel supply and/or fuel storage systems, – power connector to the grid, – portable fuel cell power systems, – propulsion fuel cell power systems, – APU (auxiliary power units) applications.

Fuel cell technologies — Part 3-3: Stationary fuel cell power systems — Installation

GSO IEC 62282-5-1:2008 燃料电池技术 第5-1部分：便携式燃料电池电源系统的安全要求

Covers construction, marking and test requirements for a.c. and d.c. type portable fuel cell systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of a portable fuel cell system is to produce useable power.

Fuel cell technologies-Part5-1:Partable fuel cell power systems-Safety

JIS C 8821:2008 小聚合物电解液燃料电池动力系统的通用规则

This Japanese Industrial Standard specifies the general rules for the stationary and portable small polymer electrolyte fuel cell power systems (hereafter referred to as "fuel cell systems") such as its composition, structure, connection with a package exterior, inspection. This Standard is not intended to be used as the completed design documentation or the instruction for use. Following this Standard does not exempt any person, organization or business enterprise from the responsibilities to observe other related regulations. This Standard is applied to the fuel cell system satisfying the following items. a) Kind of fuel cell Polymer electrolyte fuel cell b) Output Rated transmission output, less than 10 kW c) Output mode Grid-connected operation, grid-independent operation or indepen- dent operation of dc output or ac output, 220 V or less d) Raw fuel Gaseous fuel (city gas, liquefied petroleum gas, etc.), liquid fuel (kero- sene etc.) or hydrogen e) Operating pressure Maximum allowable working pressure of the portion through which fuel gas passes, less than 0.1 MPa f) System configuration Stationary and portable dedicated power generation sys- tem or cogeneration svstem stored in a nackage (excent a micro fuel cell)

General rules for small polymer electrolyte fuel cell power systems

JIS C 8800:2008 燃料电池动力系统用术语表

この規格は。燃料電池発電に関して用いられる一般的な用語のうち，燃料鷺池一般，燃料電池の形式。利用形態，性能，運転特性などに関する用語及び燃料電池発電設備の構成装置として燃料電池設備，燃料電池発電設備用電気設備，附帯設備などに関する用語について規定する。

Glossary of terms for fuel cell power system

JIS C 8832:2008 静态聚合物电解液燃料电池堆的性能试验

This Japanese Industrial Standard specifies the performance test for the atmospheric pressure fuel cell stack of the stationary polymer electrolyte fuel cell stack (hereafter referred to as "PEFC") related to the power generation test. This Standard is not intended to be used as the completed design documentation or the instruction for use. Any person, organization or business enterprise does not necessarily evade the ob- servance responsibility for other related regulations even if it conforms to this Stan- dard. NOTE : For the fuel cell stack of external humidification type, the test may be per- formed by connecting the humidifier which the manufacturer offers.

Performance test for stationary polymer electrolyte fuel cell stack

JIS C 8831:2008 静态聚合物电解液燃料电池堆的安全评估试验

This Japanese Industrial Standard specifies the safety evaluation test for the at- mospheric pressure fuel cell stack of the stationary polymer electrolyte fuel cell stack (hereafter referred to as "PEFC"). This Standard is not intended to be used as the completed design documentation or the instruction for use. Any person, organization or business enterprise does not necessarily evade the ob- servance responsibility for other related regulations even if it conforms to this Stan- dard. NOTE : For the fuel cell stack of external humidification type, the test may be per- formed by connecting the humidifier which the manufacturer offers.

Safety evaluation test for stationary polymer electrolyte fuel cell stack

JIS C 8826:2008 网状互连的小聚合物电解液燃料电池动力系统的动力调节器用测试方法

This Japanese Industrial Standard specifies the testing method of the grid-connected power conditioner with a grid-connected function among the power conditioners used for the stationary small polymer electrolyte fuel cell power systems (hereafter referred to as "fuel cell system"). This Standard is applied to the grid-connected power conditioners used for the fuel cell power systems applicable to the following items. a) Type of fuel cell Polymer electrolyte fuel cell b) Output Rated transmission output, less than 10 kW Output mode Grid-connected operation, grid-independent operation or indepen- dent operation of AC output, 220 V or less Raw material and fuel Gaseous fuel (city gas, liquefied petroleum gas, etc.), liquid fuel (kerosene, etc.) or hydrogen Operating pressure Maximum allowable working pressure of the portion through which fuel gas passes, less than 0.1 MPa System configuration Stationary dedicated power generation system or cogen- eration system stored in a package NOTE : Those power conditioners that device shall be tested without are combined with an electrical storage the storage device. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. The most recent editions of the standards (including amendments) indicated below shall be applied. JIS C 8800 Glossary of terms for fuel cell power system JIS C 8823 Testing methods for small polymer electrolyte fuel cell power systems JIS C 8824 Testing methods for environment of small polymer electrolyte fuel cell power systems JIS C 8825 Testing and measurement techniques of small polymer electrolyte fuel cell power systems JIS C 60068-1 Environmental testing Part 1: General and guidance 3 Terms and definitions For the purposes of this Standard, the terms and definitions given in JIS C 8800 and the following apply.

Testing methods of power conditioner for grid interconnected small polymer electrolyte fuel cell power systems

JIS C 8824:2008 小聚合物燃料电池动力系统的环境用测试方法

This Japanese Industrial Standard specifies the testing methods for environment of the stationary and portable small polymer electrolyte fuel cell power system (here- after referred to as "fuel cell system"). This Standard is not intended to be used as the completed design documentation or the instruction for use. This Standard is applicable to the fuel cell systems satisfying the following condi- tions: a) Type of fuel cell Polymer electrolyte fuel cell b) Output Rated transmission output, less than 10 kW Output mode Grid-connected operation, grid-independent operation or indepen- dent operation of dc output or ac output, 220 V or less Raw fuel Gaseous fuel (city gas, liquefied petroleum gas, etc.), liquid fuel (kero- sene, etc.) or hydrogen Operating pressure Maximum allowable working pressure of the portion through which fuel gas passes, less than 0.1 MPa System configuration Stationary and portable dedicated power generation sys- tem or cogeneration system stored in a package (except a micro fuel cell)

Testing methods for environment of small polymer electrolyte fuel cell power systems