27.100 电站综合 标准查询与下载

T/CES 079-2021 电化学储能系统大数据平台架构设计规范

1.　前言 标准的前言规定了标准所依据的起草规则、提出和归口信息、起草单位和起草人。本标准依据GB/T 1.1-2009的要求进行编制，标准的结构框架、格式、表述均符合GB/T 1.1的要求。 本标准的归口单位为中国电工技术学会储能标准化技术委员会，标准解释单位为中国电工技术学会储能标准化技术委员会。 2.　范围 《电化学储能大数据平台架构设计规范》适用于带有电化学储能系统的电站或分布式电站、户用储能系统、社区储能系统、大区域储能系统。本标准主要技术内容包括术语和定义、架构设计标准、逻辑架构、物理架构、系统架构、系统安全特性、容器化要求、数据实时响应要求、储能系统间协调与响应要求、备份与恢复机制。 3.　规范性引用文件 本标准在编写时参考了现行相关国家标准。对系统功能的要求及储存的要求等引用了GB/T 37721-2019《信息技术 大数据分析系统功能要求》、GB/T 37722-2019《信息技术 大数据存储与处理系统功能要求》的规定。对于系统架构分层相关引用了GB/T 37739-2019《信息技术 云计算 平台即服务部署要求》、GB/T 36327-2018《信息技术 云计算 平台即服务（PaaS）应用程序管理要求》、GB/T 35301-2017《信息技术 云计算 平台即服务（PaaS）参考架构》。系统安全方面的特性原则引用了GB/T 31167-2014《信息安全技术 云计算服务安全指南》、GB/T 31168-2014《信息安全技术 云计算服务安全能力要求》。 凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 4.　术语和定义 对“超文本传输协议 Hyper Text Transfer Protocol(HTTP)”、“微服务 Micro Service”、“分布式消息总线 Distributed message bus”、“容器编排引擎”、“容器化技术”、“分布式应用程序协调服务”进行了较为全面的定义。 5.　架构设计标准 5.1　一般性要求 规范了架构对于安全、资源、设计、可靠性、易用性等方面的要求。 5.2　架构选型 归纳了当前架构选型时，框架选择时的侧重点。 5.3　实现目标要求 说明了架构设计时需要考虑接口服务、数据及平台环境的特性。 6.　容器化要求 6.1　容器化规范 规范了容器选择时的要求及容器使用时的注意事项。 6.2　容器选型规范 规范了容器框架需要支持的特性及功能。 7.　逻辑架构 根据电化学储能系统的应用场景，划分储能大数据平台的逻辑架构，详述了表现层、业务逻辑层、数据访问层的划分及其功能作用。 8.　物理架构 8.1　web服务器要求 详述了web服务器硬件要求、操作系统要求、软件的要求以及对日志存储方面的要求。 8.2　应用服务器要求 详述了应用服务器硬件要求、操作系统要求、软件的要求以及对日志存储方面的要求。 8.3　报表服务器要求 详述了报表服务器硬件要求、操作系统要求、软件的要求以及对日志存储方面的要求。 8.4　文件服务器要求 详述了文件服务器硬件要求、操作系统要求、软件的要求以及对日志存储方面的要求。 9.　系统架构推荐 简述了推荐的Iaas、Paas、Saas层的构建思路。 10.　系统安全特性 10.1　安全设计原则 详述了电化学储能大数据平台最基本的安全设计原则，包括了最小权利原则、职责分离原则、纵深防御原则、面向失效的安全原则、回溯原则、审计原则、防御单元解耦原则及安全数据标准化原则。 10.2　安全相关架构 介绍了安全相关的基本模型及安全防护方法。 10.3　安全策略建议 详述了IaaS层安全风险策略、PaaS层安全风险策略及SaaS层安全风险策略。 11.　备份与恢复 11.1　备份范围和流程 罗列了备份的范围，并以流程图的形式介绍备份流程。 11.2　恢复范围和流程 罗列了恢复的范围，并以流程图的形式介绍恢复流程。 11.3　日常备份和恢复方式 介绍了日常备份的方式及推荐的备份及恢复操作。 11.4　日常备份周期 介绍了推荐的备份周期。

Architecture design specification for big data platform of electrochemistry energy storage system

T/CES 080-2021 预制舱式储能电站消防集中监控系统技术规范

本标准主要由预制舱式磷酸铁锂电池储能电站消防监控系统设计、系统配置和设备功能要求、施工调试和系统运行及维护组成。 本标准适用于额定功率100kW及以上接入电网运行的预制舱式磷酸铁锂电池储能电站，其他功率等级的同类储能系统可参照执行。

Technical specifications for the fire-fighting centralized monitoring system of prefabricated cabin energy storage power station

KS B 0060-2021 火力发电厂术语表（总则）

Glossary of terms for thermal power plant(General)

T/SHEPEA 002-2021 燃煤电厂环保智能化诊断系统技术规范

采用现代数字处理和通信技术获取燃煤电厂环保系统运行数据，通过统计、在线分析处理、数据建模、机器学习等诸多方法实现对环保系统运行所获数据进行计算、分析和深度挖掘，对燃煤电厂环保设施提供设备和系统的性能诊断以及优化运行方案的系统。

Technical specification of environmental protection intelligent diagnosis system for coal-fired power plant

GSO EN 45510-2-2:2021 电站设备采购指南 第2-2部分：电气设备不间断电源

This standard gives guidance on writing the technical specification for the procurement of static a.c. uninterruptible power supplies (UPS's) for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies

GSO EN 45510-5-3:2021 电站设备采购指南 第5-3部分：风力发电机组

This standard gives guidance on writing the technical specifications for the procurement of wind turbines for use in electrity generating stations (wind power stations. Other possible applications of such equipment have not been considered in the preparation of this guide. This Guide covers wind turbine generator systems (WTGS) with swept area equal to or larger than 40 m2. This guide for procurement of wind turbines has been prepared to be used with the existing international standard IEC 1400-1, it should therefore be read in addition and complementary to the International standard.

Guide for procurement of power station equipment - Part 5-3: Wind turbines

GSO EN 45510-2-9:2021 电站设备采购指南 第2-9部分：电气设备布线系统

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide on cabling systems deals with a wide range of activities and may be used for any or all of these activities by selection of the relevant parts e.g.: - provision of support for cable; - laying of cable; - completion of cable ends; The Guide covers the installation of power cable up to and including 20,8/36 (42) kV and the supply and installation of control and instrumentation cable. The supply of power cable is covered by EN 45510-2-8. The Guide includes the installation of protective conductor cable for earthing and equipotential bonding up to the main earthing busbar(s), but not the below ground earth-electrode network. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that - the equipment type and capacity interfaces correctly with other elements of the systems, - predicted performance is achieved, - ancillary equipment is properly sized, - reliability, availability and safety requirements are achieved, - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover - any commercial, contractual or legal issues which are normally in separate parts of an enquiry, - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for procurement of power station equipment - Part 2-9: Electrical equipment - Cabling systems

GSO EN 45510-2-3:2021 电站设备采购指南 第2-4部分：电气设备固定式电池和充电器

This standard gives guidance on writing the technical specification for the procurement of stationary batteries and chargers for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers stationary lead-acid and nickel-cadmium batteries, chargers, battery accommodation battery main connections and battery accessories. This equipment usually forms part of either a centralised or unit d.c. supplies system for duties such as switchgear closing/tripping, protection, control, alarm, instrumentation and telecommunication supplies, emergency lighting and emergency drives. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers

GSO EN 45510-2-8:2021 电站设备采购指南 第2-8部分：电气设备电力电缆

This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers power cables only for voltages up to and including Um = 41,5 kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems. For guidance on the technical specification of cables, including their installation and termination, refer to EN 45510-2-6 The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables

GSO EN 45510-2-6:2021 电站设备采购指南 第2-6部分：电气设备 发电机

This standard gives guidance on writing the technical specification for the procurement of turbine-driven generators and their auxiliaries for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. The generators may be air, hydrogen, or liquid-cooled. The excitation system may be of the static or rotating rectifier type fed by a static or rotating power supply. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE: As a comprehensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment.

Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators

GSO EN 45510-2-5:2021 电站设备采购指南 第2-5部分：电气设备 电机

This standard gives guidance on writing the technical specification for the procurement of motors for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers motors within installations primarily concerned with the generation of electrical power. However, as a complete electrical drive system is not defined in this Guide, attention is drawn to the possible additional electrical and mechanical stresses to which the motor may be subjected e.g. by a static AC converter/inverter. Reference should be made to IEC 60034-17. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors

GSO EN 45510-2-7:2021 电站设备采购指南 第2-7部分：电气设备开关设备和控制设备

This standard gives guidance on writing the technical specification for the procurement of switchgear and controlgear for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers switchgear and controlgear within installations primarily concerned with the generation of electrical power and, where appropriate, their interconnection with the transmission and/or distribution system. It also includes main connections (busbars) associated with generator circuits and the ancillary plant forming part of switchboards and/or switching circuits. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear

GSO EN 45510-1:2021 电站设备采购指南 第1部分：通用条款

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

Guide for procurement of power station equipment - Part 1: Common clauses

GSO EN 45510-2-4:2021 电站设备采购指南 第2-4部分：电气设备大功率静态变流器

This standard gives guidance on writing the technical specification for the procurement of static a.c. and d.c. high power convertors for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers each type of power convertor, i.e. rectifier, inverter, static excitation system, conversion of a.c. to a.c./d.c. to d.c. and switching, for the purpose of changing and/or controlling one or more characteristics. This type of equipment is used for many applications such as motor drives and actuators, e.g. variable frequency starting equipment, a.c. and d.c. power supplies for computers and instrumentation, in chemical process plant, e.g. rectifiers for electrolysis in hydrogen production, in mechanical plant, e.g. electrostatic precipitators, etc. For additional, or specific, requirements for batteries, battery chargers or uninterruptible power supplies (UPS) refer to the relevant guides in this series. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is

Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors

T/CEC 494-2021 馈线自动化模式选型与配置技术规范

本文件规定了中压配电网馈线自动化模式的总体要求、选型条件及配置要求。 本文件适用于配电自动化及系统的规划、设计、建设和改造。

Feeder automation mode selection and configuration technical specifications

T/CEC 526-2021 架空输电线路线夹X射线检测技术导则

本文件规定了架空输电线路 X 射线检测线夹压接质量评价工作的总则、图像的后处理和质量要求、典型结构线夹成像部位、缺陷的判定和处理原则、图像记录和报告信息等。 本文件适用于利用 X 射线图像对输电线路线夹的压接质量进行评价，线夹包括液压压接类耐张线夹和接续管。

Technical guidelines for X-ray detection of overhead transmission line clamps

T/CEC 478-2021 低温多效海水淡化装置停备保养导则

本文件规定了低温多效海水淡化装置停备基本要求和保养方法。 本文件适用于低温多效海水淡化装置。

Guidelines for downtime and maintenance of low temperature multi-effect seawater desalination plant

T/CEC 524.1～524.2-2021 碳纤维复合芯导线配套金具技术条件

本文件是T/CEC 524《碳纤维复合芯导线配套金具技术条件》的第 1 部分。T/CEC 524 已经发布了 以下部分： ——第 1 部分：耐张线夹； ——第 2 部分：接续管。

Carbon fiber composite core wire supporting hardware technical conditions

T/ZSECA 007-2021 能效管理体系用能控制点信息收集指引

1 范围　 2 规范性引用文件　 3 收集范围及方式　 4 企业能源信息收集表　 5 信息管理　 附录A（规范性）企业基本情况调查　 附录B（规范性）企业能源消费结构表　 附录C（规范性）企业主要耗能设备汇总表　 附录D（规范性）企业年能源直接消费量汇总表　 附录E（规范性）车间（部门）能源消耗统计表　 附录F（规范性）企业节能情况调查问卷　

Guidelines for information collection of energy use control points in energy efficiency management system

T/ZSECA 006-2021 能效管理体系控制点划分与设立规范

1  范围 2  规范性引用文件 3  术语和定义 4  控制点级别划分

Energy efficiency management system control point division and establishment specification