27.140 水力工程 标准查询与下载

NB/T 10883.7-2023 水电工程制图标准 第7部分：水土保持

本标准适用于水电工程水土保持制图

Hydropower Engineering Drawing Standards Part 7: Soil and Water Conservation

NB/T 11178-2023 水电工程后评价技术导则

本导则适用于水电工程后评价。

Technical Guidelines for Post-Evaluation of Hydropower Projects

NB/T 11219-2023 小型灯泡贯流式水轮发电机基本技术条件

本文件适用于与水轮机直接连接、570kVA≤额定容量

Basic technical conditions of small bulb tubular turbine generator

NB/T 11190-2023 水电工程专用水文测站技术规范

本规范适用于水电工程专用水文站网规划、测站设计、测站建设、测站运行管理。

Technical specifications for special hydrological measuring stations for hydropower projects

DL/T 2582.5-2023 水电站公用辅助设备运行规程 第5部分：消防系统

本文件规定了水电站消防系统的运行监视、运行操作、巡回检查、维护、异常及故障处理的要求。 本文件适用于水电站消防系统的运行维护。

Operating procedures for public auxiliary equipment of hydropower stations Part 5: Fire protection system

NB/T 11175-2023 抽水蓄能电站经济评价规范

本规范适用于抽水蓄能电站预可行性研究阶段和可行性研究阶段的经济评价。

Standards for economic evaluation of pumped storage power stations

NB/T 11181-2023 水电工程竣工环境保护验收技术规程

本规程适用于水电工程竣工环境保护验收工作。

Technical regulations for environmental protection acceptance of completed hydropower projects

NB/T 11188-2023 水电工程泄洪雾化防护技术导则

本导则适用于水电工程泄洪雾化防护技术。

Technical Guidelines for Flood Discharge Atomization Protection in Hydropower Projects

NB/T 11186-2023 水电工程水文测验及资料整编规范

本规范适用于水电工程水文测验及资料整编。水文测验及资料整编工作内容应满足水电工程规划、设计、施工和运行的需要。

Standards for hydrological testing and data compilation of hydropower projects

T/CEEIA 690-2023 水电厂自动发电控制技术要求及试验导则

本文件规定了水电厂自动发电控制的技术要求、试验方法。 本文件适用于大、中型水电厂自动发电控制，其他类型水电厂亦可参照使用。

Guide to technical specification and testing for automatic power generation control in hydropower plants

T/SDIRAA 909-2023 废弃矿井抽水蓄能电站设计建设指南

4  总则 5  建设规划 6  工程勘查 7  建设方案 8  运维管理 9  运行监测

Guidelines for Design and Construction of Abandoned Mine Pumped Storage Power Station

DB37/T 4606-2023 平原区农村洪涝灾害调查评价技术规范

Technical specifications for investigation and evaluation of rural flood disasters in plain areas

DB6523/T 383-2023 地下水井电双控计量监控设施运行维护规范

本文件规定了地下水井电双控计量监控设施（以下简称“计量监控设施”）运行维护管理的总体要求、运行维护单位、计量监控设施运行维护、运行维护安全要求、运行维护数据（档案）管理以及监督管理的要求。 本文件适用于昌吉州行政区域内取用地下水的井电双控计量监控设施的运行维护；也适用于运行维护管理机构对运行维护活动的监督、考核等工作。

Specifications for operation and maintenance of groundwater well electricity dual-control metering and monitoring facilities

GSO IEC TS 62600-2:2023 海洋能源 波浪、潮汐和其他水流转换器 第2部分：海洋能源系统 设计要求

IEC TS 62600-2:2019 provides design requirements to ensure the engineering integrity of wave, ocean, tidal and river current energy converters, collectively referred to as marine energy converters. Its purpose is to provide an appropriate level of protection against damage from all hazards that may lead to catastrophic failure of the MEC structural, mechanical, electrical or control systems. This document provides requirements for MEC main structure, appendages, seabed interface, mechanical systems and electrical systems as they pertain to the viability of the device under site-specific environmental conditions. This document applies to MECs that are either floating or fixed to the seafloor or shore and are unmanned during operational periods. In addition to environmental conditions, this document addresses design conditions (normal operation, operation with fault, parked, etc.); design categories (normal, extreme, abnormal and transport); and limit states (serviceability, ultimate, fatigue and accidental) using a limit state design methodology. This second edition cancels and replaces the first edition published in 2016. This edition includes the following significant technical changes with respect to the previous edition: a) The second edition sets forth design conditions unique to marine energy converters.

Marine energy - Wave, tidal and other water current converters - Part 2: Marine energy systems - Design requirements

GSO IEC TS 62600-4:2023 海洋能波浪、潮汐和其他水流转换器 第4部分：新技术鉴定规范

IEC TS 62600-4:2020 specifies the requirements of the technology qualification process for marine renewable technologies. Technology Qualification is a process of providing evidence and arguments to support claims that the technology under assessment will function reliably in a target operating environment within specific limits and with an acceptable level of confidence. The Technology Qualification process is also assumed in IEC TS 62600-2:2019. The objective of this document is to provide the necessary practices and technical requirements, regarding technology qualification methodology, to support the needs of the IECRE certification process for marine renewables energy systems. Technology Qualification may be performed at the beginning of the certification process to identify the uncertainties, novelties, and modes of failure, mechanisms of failure, risks and risk control measures. In addition, Technology Qualification will identify the standards that are applicable, to what extent and what adaptation to the technology is required to address the risks. The Technology Qualification Plan is the deliverable arising from this process and it will provide all necessary actions to achieve certification.

Marine energy - Wave, tidal and other water current converters - Part 4: Specification for establishing qualification of new technology

GSO IEC TS 62600-30:2023 海洋能源 波浪、潮汐和其他水流转换器 第30部分：电能质量要求

IEC TS 62600-30:2018(E) includes: definition and specification of the quantities to be determined for characterizing the power quality of a marine energy (wave, tidal and other water current) converter unit; measurement procedures for quantifying the characteristics of a marine energy (wave, tidal and other water current) converter. The measurement procedures are valid for a single marine energy converter (MEC) unit (or farm) with three-phase grid or an off-grid connection. The measurement procedures are valid for any size of MEC unit.

Marine energy - Wave, tidal and other water current converters - Part 30: Electrical power quality requirements

GSO IEC TS 62600-20:2023 海洋能 波浪、潮汐和其他水流转换器 第20部分：海洋热能转换 (OTEC) 工厂的设计和分析 一般指南

IEC TS 62600-20:2019 establishes general principles for design assessment of OTEC plants. The goal is to describe the design and assessment requirements of OTEC plants used for stable power generation under various conditions. This electricity may be used for utility supply or production of other energy carriers. The intended audience is developers, engineers, bankers, venture capitalists, entrepreneurs, finance authorities and regulators. This document is applicable to land-based (i.e. onshore), shelf-mounted (i.e. nearshore seabed mounted) and floating OTEC systems. For land-based systems the scope of this document ends at the main power export cable suitable for connection to the grid. For shelf-mounted and floating systems, the scope of this document normally ends at the main power export cable where it connects to the electrical grid. This document is general and focuses on the OTEC specific or unique components of the power plant, particularly the marine aspects of the warm and cold water intake systems. Other established standards are referenced to address common components between the OTEC system and other types of power plants and floating, deep water oil and gas production vessels, such as FPSOs and FLNG systems. Relevant standards are listed within this document as appropriate.

Marine energy - Wave, tidal, and other water current converters - Part 20: Design and analysis of an Ocean Thermal Energy Conversion (OTEC) plant - General guidance

T/CIPR 099-2023 水域垃圾回收装置水轮技术规范

本标准规定了水域垃圾回收装置中水轮的一般规定、腐蚀程度的初步判定、材料防护、 综合防护措施。 本文件适用于机组功率为 500kW～15MW 水轮磨蚀防护，容量小于 500kW 的水轮磨蚀防护，也可参照本标准执行。

Technical Specifications for Water Wheels for Waste Recycling Devices in Water Areas

IEC 63132-6:2023 水力电机安装程序和公差指南 第6部分：立式冲击式水轮机

Guidance for installation procedures and tolerances of hydroelectric machines - Part 6: Vertical Pelton turbines

IEC 63132-5:2023 水力发电设备的安装程序和公差指南.第5部分:灯泡式水轮机和发电机

Guidance for installation procedures and tolerances of hydroelectric machines - Part 5: Bulb turbines and generators