共找到 1808 条与 水力工程 相关的标准,共 121 页
Methodology, procedures and equipment required for the laboratory testing of a modular and crosscutting Power Take-Off for wave energy converters
1.0.1 为规范水电水利工程土工膜面板堆石坝设计、施工、质量检测等方面的技术和标准,积极推广土工膜面板堆石坝在工程中应用,保证工程质量,做到技术先进、经济合理、安全适用,制定本规范。 1.0.2 本规范适用于坝高不大于 150 m 的土工膜面板堆石坝工程,坝高大于150 m 时,应进行研究论证。 1.0.3 土工膜面板堆石坝应积极采用经过试验论证或通过技术鉴定的新技术、新工艺、新材料、新设备。 1.0.4 水电水利工程土工膜面板堆石坝建设,除应符合本规范外,坝体的设计与施工尚应符合《混凝土面板堆石坝设计规范》DL/T 5016 和《混凝土面板堆石坝施工规范》DL/T 5128 的相关规定。
Technical specifications for geomembrane face rockfill dams
1.0.1 为规范水电水利工程深埋地下洞室开挖施工,保障工程安全和质量,制定本规范。 1.0.2 本规范适用于大、中型水电水利工程深埋地下洞室开挖施工。 1.0.3 深埋地下洞室开挖施工应积极采用经试验或论证的新技术、新工艺、新流程、新材料和新设备。 1.0.4 水电水利工程深埋地下洞室开挖施工,除应符合本规范外,尚应符合国家现行有关标准的规定。
Construction code for excavation of deep underground caverns in hydropower and water conservancy projects
Marine energy. Wave, tidal and other water current converters. Marine energy systems. Design requirements
Technical guidelines for the development of small hydropower plants — Part 3: Design principles and requirements
Water conservancy information model application standard
"One River, One Policy" Scheme Compilation Regulations
Specifications for operation and maintenance of water resources monitoring facilities
本文件规定了电力设备金属部件热喷涂过程质量控制的技术要求。 本文件适用于火电、水电、核电、风电、电网等电力设备金属部件的等离子、火焰、电弧类热喷 涂施工过程。
Quality Control of Thermal Spraying Process for Power Equipment
"One lake, one policy" scheme preparation procedures
本文件规定了圆锥滚子轴承套圈车件的术语和定义、符号、结构型式、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存以及质量承诺。 本文件适用于高碳铬轴承钢制造的外圈外径为 Φ42 mm~Φ320 mm、内圈内径为 Φ15 mm~Φ150 mm的圆锥滚子轴承套圈车件(以下简称“轴承套圈车件”)。
Taper roller bearing turned rings
Pump station reverse power generation technical specification
Guidance for installation procedures and tolerances of hydroelectric machines -- Part 4: Vertical Kaplan or propeller turbines (IEC 63132-4:2020)
Guidance for installation procedures and tolerances of hydroelectric machines -- Part 3: Vertical Francis turbines or pump-turbines (IEC 63132-3:2020)
Guidance for installation procedures and tolerances of hydroelectric machines -- Part 1: General aspects (IEC 63132-1:2020)
Guidance for installation procedures and tolerances of hydroelectric machines -- Part 2: Vertical generators (IEC 63132-2:2020)
Specifications for design of concrete production systems for hydropower projects
Technical specifications for soil and water conservation in hydropower construction projects
Technical regulations for soil and water conservation monitoring in hydropower projects
Hydropower engineering information model data description specification
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号