29.035.01 绝缘材料综合 标准查询与下载

KS C IEC 60626-3:2017 电绝缘用复合柔软材料 第3部分：专项材料规范

Combined flexible materials for electrical insulation－Part 3：Specifications for individual materials

KS C IEC 60626-3-2017 组合挠性材料的电绝缘 - 第3部分:专用材料规范

Combined flexible materials for electrical insulation－Part 3：Specifications for individual materials

DIN EN 62631-3-1:2017 固体绝缘材料的介电和电阻特性.第3-1部分:电阻特性的测定(直流方法).体积电阻和体积电阻率.通用方法(IEC 62631-3-1-2016).德文版本EN 62631-3-1-2016

Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2016); German version EN 62631-3-1:2016

ASTM D5470-17 导热绝缘材料的热传输特性的标准试验方法

5.1 This standard measures the steady state thermal impedance of electrical insulating materials used to enhance heat transfer in electrical and electronic applications. This standard is especially useful for measuring thermal transmission properties of specimens that are either too thin or have insufficient mechanical stability to allow placement of temperature sensors in the specimen as in Test Method E1225. 5.2 This standard imposes an idealized heat flow pattern and specifies an average specimen test temperature. The thermal impedances thus measured cannot be directly applied to most practical applications where these required uniform, parallel heat conduction conditions do not exist. 5.3 This standard is useful for measuring the thermal impedance of the following material types. 5.3.1 Type I—Viscous liquids that exhibit unlimited deformation when a stress is applied. These include liquid compounds such as greases, pastes, and phase change materials. These materials exhibit no evidence of elastic behavior or the tendency to return to initial shape after deflection stresses are removed. 5.3.2 Type II—Viscoelastic solids where stresses of deformation are ultimately balanced by internal material stresses thus limiting further deformation. Examples include gels, soft, and hard rubbers. These materials exhibit linear elastic properties with significant deflection relative to material thickness. 5.3.3 Type III—Elastic solids which exhibit negligible deflection. Examples include ceramics, metals, and some types of plastics. 5.4 The apparent thermal conductivity of a specimen is able to be calculated from the measured thermal impedance and measured specimen thickness if the interfacial thermal resistance is insignificantly small (nominally less than 18201;%) compared to the thermal resistance of the specimen. 5.4.1 The apparent thermal conductivity of a sample material is able to be accurately determined by excluding the interfacial thermal resistance. This is accomplished by measuring the thermal impedance of different thicknesses of the material under test and plotting thermal impedance versus thickness. The inverse of the slope of the resulting straight line is the apparent thermal conductivity. The intercept at zero thickness is the sum of the contact resistances at the two surfaces. 5.4.2 The contact resistance is able to be reduced by applying thermal grease or oil to the test surfaces of rigid test specimens (Type III). 1.1 This standard covers a test method for measurement of thermal impedance and calculation of an apparent thermal conductivity for thermally conductive electrical insulation materials ranging from liquid compounds to hard solid materials. 1.2x00a0......

Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

ASTM D3394-16 电气绝缘板采样和测试的标准测试方法

1.1 These test methods cover the sampling and testing of electrical insulating boards. These boards are porous, usually fibrous sheets used for dielectric and structural purposes in electrical apparatus. 1.2 These test methods are not intended for testing vulcanized fibre or molded laminated sheets. 1.3 These test methods are applicable to board materials having a nominal thickness of at least 0.030 in. (0.76 mm). NOTE 1—For materials thinner than 0.030 in. (0.76 mm) see Test Methods D202. 1.4 The test methods appear in the following sections: Sections ASTM Method Reference Apparent Density 18 – 23 Aqueous Extract Characteristics 36 – 42 D202 Ash Content 43 – 46 T 413 Compatibility with Dielectric Liquids 47 – 52 D664, D877, D924, D971, D974, D1169, D1500, D1816, D3455, D3487 Compressibility 79 – 85 Conditioning 11 D685 Degree of Polymerization 86 – 89 D4243 Dielectric Strength in Air 53 – 59 D149 Dielectric Strength in Oil 60 – 65 D149, D2413, D3426 Dimensions of Sheets 12 – 17 Moisture Content 31 – 35 D644 Oil Absorption 72 – 78 Reports 10 Sampling 6 – 9 D3636 Shrinkage 24 – 30 D644 Tensile Properties 66 – 71 D202 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Sampling and Testing Electrical Insulating Board

JB/T 12925-2016 层压母线柔性绝缘衬垫材料的绝缘性能试验方法

Test method for insulation properties of flexible insulating lining materials for laminated busbars

JIS C 2142:2016 固体电绝缘材料.试验前和试验期间使用的标准条件

Solid electrical insulating materials -- Standard conditions for use prior to and during the testing

DIN EN 62631-3-3:2016 固体绝缘材料的介电和电阻特性.电阻特性的测定(直流方法).绝缘电阻(IEC 62631-3-3-2015).德文版本EN 62631-3-3-2016

Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance (IEC 62631-3-3:2015); German version EN 62631-3-3:2016

DIN EN 62631-3-2:2016 固体绝缘材料的介电和电阻特性.电阻特性的测定(直流方法).表面电阻和表面电阻率(IEC 62631-3-2-2015).德文版本EN 62631-3-2-2016

Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015); German version EN 62631-3-2:2016

ASTM C1785-16a 金属护套防潮针孔检测浓度标准试验方法

1.1 This test method covers the determination of the concentration of pinhole detections in a moisture barrier film or coating that is applied to the interior surface of metal jacketing. 1.2 Since this method relies on the completion through the metal jacketing of an electrical circuit, this method is only applicable to jacketing that is electrically conductive and has a moisture barrier applied which is not electrically conductive. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

GOST IEC 60811-604-2016 电力和光纤电缆 非金属材料的试验方法 第 604 部分 物理测试 测量填充化合物中是否存在腐蚀性成分

Electric and optical fibre cables. Test methods for non-metallic materials. Part 604. Physical tests. Measurement of absence of corrosive components in filling compounds

KS C IEC 60455-3-2-2015(2020) 电气绝缘用树脂基活性化合物第3部分:单项材料规范活页2:石英填充环氧树脂化合物

Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds

KS C IEC 60893-3-6-2015(2020) 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范第6页:硅树脂硬质层压板要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets

KS C IEC 60893-3-7:2015 绝缘材料 电工用热固性树脂工业硬质层压片 第3-7部分：专用材料规范 聚酰亚胺树脂基刚性层压片的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins

KS C IEC 60893-3-5:2015 绝缘材料 电工用热固性树脂工业硬质层压片 第3-5部分：专用材料规范 聚酯树脂硬质层压片的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets based on polyester resins

KS C IEC 60626-1:2015 电气绝缘用复合柔软材料 第1部分：定义和通用要求

Combined flexible materials for electrical insulation－Part 1：Definitions and general requirements

KS C IEC 60464-3-1:2015 含溶剂绝缘漆规范 第3部分：单项材料规范 第1节 室温固化饰面漆的要求

Varnishes used for electrical insulation-Part 3:Specifications for individual materials-Sheet 1:Ambient curing finishing varnishes

KS C IEC 61212-3-1-2015(2020) 绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管

Insulating materials－Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 1：Round laminated rolled

KS C IEC 60893-3-6:2015 绝缘材料 电工用热固性树脂工业硬质层压片 第3-6部分：专用材料规范 硅树脂硬质层压片的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets based on silicone resins

KS C IEC 60455-3-2:2015 电气绝缘用树脂基复合物 第3部分：单项材料规范 节2 石英填料的环氧树脂复合物

Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds