29.035.01 绝缘材料综合 标准查询与下载

KS C IEC 60893-3-7:2015 绝缘材料 电工用热固性树脂工业硬质层压片 第3-7部分：专用材料规范 聚酰亚胺树脂基刚性层压片的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins

KS C IEC 60893-3-5-2015(2020) 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范第5活页:聚酯树脂硬质层压板要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets

KS C IEC 61212-3-1-2015(2020) 绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管

Insulating materials－Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 1：Round laminated rolled

KS C IEC 60893-3-6-2015(2020) 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范第6页:硅树脂硬质层压板要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets

KS C IEC 60464-3-1:2015 含溶剂绝缘漆规范 第3部分：单项材料规范 第1节 室温固化饰面漆的要求

Varnishes used for electrical insulation-Part 3:Specifications for individual materials-Sheet 1:Ambient curing finishing varnishes

KS C IEC 60455-2-2:2015 电气绝缘用无溶剂可聚合树脂化合物规范 第2部分：试验方法 电工用涂敷粉末试验方法

Specification for solventless polymerisable resinous compounds used for electrical insulation-Part 2:Methods of test-Test methods for coating powders for electrical purpose

KS C IEC 60455-3-2-2015(2020) 电气绝缘用树脂基活性化合物第3部分:单项材料规范活页2:石英填充环氧树脂化合物

Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds

KS C IEC 61212-3-1:2015 电工用工业刚性圆热固树脂层压管和棒材 第3部分：专用材料规范 节1 圆层压轧制管

Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 1:Round laminated rolled tubes

KS C IEC 60893-3-7-2015(2020) 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范第7页:聚酰亚胺树脂硬质层压板要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets

KS C IEC 60092-359-2015 船舶电气装置 第359部分：船用电力和电信电缆护套材料

Electrical installations in ships－Part 359：Sheathing materials for shipboard power and telecommunication cables

KS C IEC 60092-351:2015 船舶电气安装 第351部分：船舶和海上单位 电力 控制 仪器仪表 电信和数据电缆绝缘材料

Electrical installations in ships — Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables

KS C IEC 60092-359:2015 船舶电气装置 第359部分：船用电力电缆和电信用电缆的护套材料

Electrical installations in ships－Part 359：Sheathing materials for shipboard power and telecommunication cables

IEC 62631-3-3:2015 固体绝缘材料的介电和电阻性能 - 第3-3部分:电阻性质的测定（Dc方法） - 绝缘电阻

This part of IEC 62631 covers methods of test for the determination of the insulation resistance of electrical insulating materials or insulating systems by applying DC voltage.

Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance

IEC 61251:2015 电气绝缘材料和系统 - 交流耐压评估

This International Standard describes many of the factors involved in voltage endurance tests on electrical insulating materials and systems. It describes the voltage endurance graph@ lists test methods illustrating their limitations and gives guidance for evaluating the sinusoidal a.c. voltage endurance of insulating materials and systems from the results of the tests. This International Standard is applicable over the voltage frequency range 20 Hz to 1 000 Hz. The general principles can also be applicable to other voltage shapes@ including impulse voltages. The terminology to be used in voltage endurance is defined and explained.

Electrical insulating materials and systems - AC voltage endurance evaluation

DIN IEC/TS 60216-7-1:2015 电气绝缘材料.耐热性能.第7-1部分:采用分析试验方法加速测定相对耐热性(RTEA).基于活化能量的计算说明(IEC/TS 60216-7-1:2015)

Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy (IEC/TS 60216-7-1:2015)

GSO IEC 60455-3-4:2015 用于电绝缘的树脂基反应性化合物 第3部分：单个材料的规格 表 4：填充聚氨酯化合物

This part of IEC 60455 contains the requirements for filled polyurethane resinous compounds in the cured form for classes PUR-F-4 to PUR-F-8.

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds

GSO IEC 60544-4:2015 电绝缘材料 电离辐射影响的测定 第4部分：辐射环境中使用的分类系统

This part of IEC 60544 provides a classification system that serves as a guide for the selection and indexing of insulating materials intended to serve in the radiation environment of nuclear reactor facilities, reactor fuel-processing facilities, irradiation facilities, particle accelerators, and X-ray apparatus. The classification system provides a set of parameters defining the utility of the three types of polymeric materials (rigid plastics, flexible plastics, elastomers) for use in devices which are exposed to ionizing radiation. This part of IEC 60544 forms the basis for a quantitative statement of the suitability of such materials for radiation environments and therefore provides a guide for material specifications and for procurement agreements between suppliers and users.

Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments

GSO IEC 60243-1:2015 绝缘材料的电气强度试验方法 第1部分：工频试验

This part of IEC 60243 provides test methods for the determination of short-time electric strength of solid insulating materials at power frequencies between 48 Hz and 62 Hz. This standard does not cover the testing of liquids and gases, although these are specified and used as impregnates or surrounding media for the solid insulating materials being tested. NOTE Methods for the determination of breakdown voltages along the surfaces of solid insulating materials are included.

Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

GSO IEC 60455-3-5:2015 用于电绝缘的树脂基反应性化合物 第3部分：单个材料的规范 表 5：不饱和聚酯基浸渍树脂

This sheet 5 of IEC 60455-3 gives the requirements for unsaturated polyester based impregnating resins, and includes requirements for certain properties at elevated temperature. Materials which conform to this specification meet established levels of performance.However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone.

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

GSO IEC 60811-301:2015 电缆和光缆 非金属材料的试验方法 第301部分：电气试验 23°C 下填料化合物介电常数的测量

This Part 301 of IEC 60811 gives the procedure to determine the permittivity at 23 °C which typically applies to filling compounds used for optical cables, communication cables and optical fibre cables.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds