29.035.01 绝缘材料综合 标准查询与下载

IEC 60464-1:1998+AMD1:2006 CSV 电气绝缘用清漆.第1部分:定义和一般要求

Varnishes used for electrical insulation - Part 1: Definitions and general requirements

BS EN 60243-1:2013 绝缘材料电气强度.试验方法.工业频率下的试验

Electric strength of insulating materials. Test methods. Tests at power frequencies

EN 61212-3-1:2013 绝缘材料.电工用热固性树脂基工业硬质圆形层压管和棒.第3部分:单项材料规范.表1:圆形层压轧制管

IEC 61212-3-1:2013 gives requirements for industrial rigid round laminated rolled tubes for electrical purposes, based on different resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Details of test for insulation resistance after immersion in water and values for permissible deviation from nominal external diameter of round rolled tubes in the 'as rolled and cured' condition are changed. Key words: industrial rigid round laminated rolled tubes

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes

EN 60455-3-8:2013 用于电绝缘的树脂基活性化合物 第3部分：个别材料的规范 第 8 页：电缆附件用树脂

IEC 60455-3-8:2013 gives the requirements for resins for power cable accessories which conform to this specification and meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone. Key words: requirements for resins for power cable accessories

Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

EN 61212-3-2:2013 电工用热固性树脂工业硬质圆形层压管和棒.第3部分:单项材料规范.表2:圆形层压模制管

IEC 61212-3-2:2013 gives requirements for industrial rigid round laminated moulded tubes for electrical purposes, based on different resins and different reinforcements. Applications and distinguishing properties are given in Table 1. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Details of test for insulation resistance after immersion in water are changed. Key words: industrial rigid round laminated moulded tubes

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes

DIN EN 60544-2:2013 电绝缘材料.测定电离辐射对绝缘材料的效应.第2部分:辐照和试验规程(IEC 60544-2-2011).德文版本EN 60544-2-2012

Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test (IEC 60544-2:2012); German version EN 60544-2:2012

LST EN 60893-3-4-2004/A1-2013 绝缘材料 电气用热固性树脂工业刚性层压板 第 3-4 部分：个别材料规范 酚醛树脂基刚性层压板的要求（IEC 60893-3-4:2003/A1:2

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003/A1:2

LST EN 60893-3-1-2013 绝缘材料 电气用热固性树脂基工业刚性层压板 第 3-1 部分：个别材料规范 工业刚性层压板类型（IEC 60893-3-1:2012）

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (IEC 60893-3-1:2012)

ANSI/ASTM D374M:2013 固体电绝缘材料厚度的试验方法(米制)

Test Methods for Thickness of Solid Electrical Insulation (Metric)

ANSI/ASTM D229:2013 电气装置用硬板和厚板材的试验方法

Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

ANSI/ASTM D2303:2013 绝缘材料液体污染、斜面漏电痕迹和侵蚀的新标准试验方法

New Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

ANSI/ASTM D2520:2013 微波频率和温度为1650℃时实心电绝缘材料综合介电常数的新标准试验方法

New Standard Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures of 1650 C

ANSI/ASTM D3636:2013 固体电绝缘材料取样及质量评定的操作规程

Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

ANSI/ASTM D470:2013 电线和电缆用交联绝缘材料和护套的试验方法

Test Methods for Crosslinked Insulations and Jackets for Wire And Cable

GSO IEC 60811-508:2012 光纤和电缆 非金属材料试验方法 第（508）部分：机械试验 高温绝缘和护套压缩试验

IEC 60811-508:2012 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials. IEC 60811-508:2012 cancels and replaces Clause 8 of IEC 60811-3-1:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. Significant technical changes with respect to the previous edition are as follows: - re-statement of oven characteristics, especially relating to anti-vibration and to temperature control; - enhanced detail as to the preparations and testing of flat cables; - enhanced detail as to thickness and dimensional measurements. See also the Foreword to IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths

GSO IEC 60811-507:2012 光纤和电缆 非金属材料的试验方法 第（507）部分：机械试验 加热模式下交联材料的试验

IEC 60811-507:2012 gives the procedure for the hot set test, which typically applies to cross-linkable compounds used for insulating and sheathing materials. IEC 60811-507:2012 cancels and replaces Clause 9 of IEC 60811-2-1:1998, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

GSO IEC 60811-505:2012 光纤和电缆非金属材料试验方法第(505)部分：低温下绝缘和护套伸长率

IEC 60811-505:2012 gives the procedure for performing elongation tests at low temperature on extruded insulations and sheaths. IEC 60811-505:2012 cancels and replaces 8.3 and 8.4 of IEC 60811-1-4:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths

GSO IEC 60811-503:2012 电力和光纤电缆 非金属材料的试验方法 第（503）部分：机械试验 护套收缩试验

IEC 60811-503:2012 gives the test method for the shrinkage for sheaths. IEC 60811-503:2012 cancels and replaces Clause 11 of IEC 60811-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths

DS/EN 60544-2:2012 电绝缘材料 电离辐射对绝缘材料影响的测定 第2部分：辐照和试验程序

IEC 60544-2:2012 specifies the controls maintained over the exposure conditions during and after the irradiation of insulating materials with ionizing radiation prior to the determination of radiation-induced changes in physical or chemical properties. Th

Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test

NF C32-011-505*NF EN 60811-505:2012 电缆和光缆.非金属材料试验方法.第505部分:机械试验.绝缘鞘用低温收缩试验

Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: mechanical tests - Elongation at low temperature for insulations and sheaths