29.035.01 绝缘材料综合 标准查询与下载

BS EN 60811-509:2012 电缆和光缆. 非金属材料的试验方法. 机械试验. 阻止绝缘材料和护套开裂的试验(热冲击试验)

Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)

BS EN 60811-412:2012 电缆和光缆. 非金属材料试验方法. 杂项试验. 热老化试验方法. 航空炸弹老化

Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb

LST EN 60893-3-3-2004/A1-2012 绝缘材料 电气用热固性树脂工业刚性层压板 第 3-3 部分：个别材料规范 三聚氰胺树脂基刚性层压板的要求（IEC 60893-3-3:2003/A1:2

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003/A1:2

LST EN 60626-1-2012 电绝缘用复合柔性材料 第1部分：定义和一般要求（IEC 60626-1:2009）

Combined flexible materials for electrical insulation -- Part 1: Definitions and general requirements (IEC 60626-1:2009)

IEC 60626-3:2008+AMD1:2012 CSV 电气绝缘用组合柔性材料 第3部分 个别材料的规格

Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

IEC 60626-3:2008/AMD1:2012 修改件1.电气绝缘用组合柔性材料.第3部分:单项材料规范

Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

BS EN 60544-5:2012 电绝缘材料.确定电离辐射的影响.在使用过程中老化的评定规程

Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service

DS/EN 60544-5:2012 电绝缘材料 电离辐射影响的测定 第5部分：使用老化评估程序

IEC 60544-5:2011 covers ageing assessment methods which can be applied to components based on polymeric materials (e.g. cable insulation and jackets, elastomeric seals, polymeric coatings, gaiters) which are used in environments where they are exposed to

Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service

EN 60811-513:2012 电缆和光纤电缆 非金属材料的测试方法 第513部分：机械测试 聚乙烯和聚丙烯化合物的特定方法 调节后的缠绕测试

IEC 60811-513:2012 gives procedures for a wrapping test after conditioning at elevated temperature. This test method applies specifically to polyethylene and polypropylene insulation. This test is intended for samples from filled cables of polyolefin insulation having a wall thickness of less than or equal to 0,8 mm. IEC 60811-513:2012 cancels and replaces Clause 9 of IEC 60811-4-2:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning

EN 60811-407:2012 电缆和光纤电缆 非金属材料的试验方法 第407部分：杂项试验 聚乙烯和聚丙烯化合物质量增加的测量

IEC 60811-407:2012 gives the procedure to examine possible interaction between insulation material and filling compound of filled cable. IEC 60811-407:2012 cancels and replaces Clause 11 of IEC 60811-4-2:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds

EN 60811-505:2012 电缆和光缆-非金属材料的试验方法-第505部分：机械试验-绝缘和护套的低温伸长率

IEC 60811-505:2012 gives the procedure for performing elongation tests at low temperature on extruded insulations and sheaths. IEC 60811-505:2012 cancels and replaces 8.3 and 8.4 of IEC 60811-1-4:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths

EN 60811-504:2012 电缆和光缆-非金属材料的试验方法-第504部分：机械试验-绝缘和护套的低温弯曲试验

IEC 60811-504:2012 gives the procedure for performing bending tests at low temperature on extruded insulations and sheaths. IEC 60811-504:2012 cancels and replaces 8.1 and 8.2 of IEC 60811-1-4:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100: 2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths

EN 60811-411:2012 电缆和光纤电缆 非金属材料的试验方法 第411部分：杂项试验 填充化合物的低温脆性

IEC 60811-411:2012 gives the procedure to evaluate lower temperature brittleness which typically applies to filling compounds used for communication and optical fibre cables. IEC 60811-411:2012 cancels and replaces Clause 6 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds

EN 60811-402:2012 电缆和光纤电缆 非金属材料的试验方法 第402部分：杂项试验 吸水试验

IEC 60811-402:2012 describes water absorption tests which typically apply to cross-linked and thermoplastic compounds used for insulating and sheathing materials. IEC 60811-402:2012 cancels and replaces Clause 9 of IEC 60811-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests

EN 60811-511:2012 电缆和光纤电缆 非金属材料的试验方法 第511部分：机械试验 聚乙烯化合物熔体流动指数的测量

IEC 60811-511:2012 describes the procedure for the measurement of the melt flow index for polyethylene compounds. IEC 60811-511:2012 cancels and replaces Clause 10 of IEC 60811-4-1:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds

EN 60811-601:2012 电缆和光纤电缆 非金属材料的试验方法 第601部分：物理试验 填充化合物滴点的测量

IEC 60811-601:2012 specifies the test procedure for measuring the drop point of filling compounds. IEC 60811-601:2012 cancels and replaces Clause 4 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds

EN 60811-507:2012 电缆和光纤电缆 非金属材料的试验方法 第507部分：机械试验 交联材料的热变形试验

IEC 60811-507:2012 gives the procedure for the hot set test, which typically applies to cross-linkable compounds used for insulating and sheathing materials. IEC 60811-507:2012 cancels and replaces Clause 9 of IEC 60811-2-1:1998, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.[ ] This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials

EN 60811-409:2012 电缆和光纤电缆 非金属材料的试验方法 第409部分：杂项试验 热塑性绝缘材料和护套的质量损失试验

IEC 60811-409:2012 gives the procedure for measuring the loss of mass which normally applies to PVC insulations and sheaths. IEC 60811-409:2012 cancels and replaces Clause 8 of IEC 60811-3-2:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

EN 60811-509:2012 电缆和光纤电缆 非金属材料的试验方法 第509部分：机械试验 绝缘和护套抗裂试验（热冲击试验）

IEC 60811-509:2012 gives the procedure for the test for resistance of insulations and sheaths to cracking at an elevated temperature. IEC 60811-509:2012 cancels and replaces Clause 9 of IEC 60811-3-1:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)

EN 60811-607:2012 电缆和光缆-非金属材料的试验方法-第607部分：物理试验-聚乙烯和聚丙烯中碳黑分散评估的试验

IEC 60811-607:2012 specifies test methods for carbon black dispersion that are applicable specifically to PE and PP compounds, including cellular compounds and foam skin for insulation. IEC 60811-607:2012 cancels and replaces Clause 13 of IEC 60811-4-1:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene