29.035.10 纸和纸板绝缘材料 标准查询与下载

GSO IEC 60371-3-2:2015 云母基绝缘材料 第3部分：独立材料规范 表 2：云母纸

This part of IEC 60371 gives requirements for electrical insulating materials made from mica paper which is to be processed for built-up mica materials according to IEC 60371-1, such as rigid flat mica materials, flexible mica materials, curable flexible mica materials and shaped pieces. Materials which conform to this specification meet established levels of performance.However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper

GSO IEC 60554-2:2015 电气用纤维素纸 第2部分：测试方法

This part of IEC 60554 applies to cellulosic papers for electrical purposes. It specifies the methods of test to be used in testing cellulosic papers for electrical purposes to meet the requirements prescribed in the specification sheet of IEC 60554-3. In this standard, reference is made in several places to ISO standards accompanied by a short description of the method used. It is to be understood that this short description is meant for identification purposes only and that all details should be taken from the ISO standard itself.

Cellulosic papers for electrical purposes - Part 2: Methods of test

JIS C 2323-1:2015 用于电气用途的非纤维素纸.第1部分:定义和通用要求

Non-cellulosic papers for electrical purposes -- Part 1: Definitions and general requirements

JIS C 2323-3-3:2015 用于电气用途的非纤维素纸.第3部分:单独材料规格.活页3:芳纶纸

Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Aramid papers

JIS C 2323-2:2015 用于电气用途的非纤维素纸.第2部分:试验方法

Non-cellulosic papers for electrical purposes -- Part 2: Methods of test

JB/T 12169-2015 电气用压纸板和薄纸板 薄纸板

本标准规定了电气用薄纸板的分类与命名、要求、试验方法。 本标准适用于由100%硫酸盐木浆或100%棉浆以及硫酸盐木浆和棉浆的混合物制成的电气用薄纸板。

Pressboard and presspaper for electrical purposes.Presspaper

JB/T 12175-2015 电气用真空浸胶环氧玻璃布板

本标准规定了电气用真空浸胶环氧玻璃布板的型号、要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于环氧酸酐胶粘剂、后处理无碱玻璃布及叠坯在真空下将胶粘剂注入模具内固化而成的电气用真空浸胶板。

Glass cloth laminated sheets based on epoxy with vacuum impregnation for electrical purposes

JB/T 12166-2015 电力电容器纤维素纸

本标准规定了电力电容器纤维素纸的分类命名、性能要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于由未漂硫酸盐木浆制成的电容器纤维素纸。

Electric power capacitor cellulosic paper

GSO IEC 60554-3-3:2014 电气用纤维素纸的规格 第3部分：独立材料的规格 数据页 3：薄的、起皱的纸张

This sheet contains the requirements for crêpe paper, as defined in I E C Publication 554-1, Part 1: Definitions and General Requirements, classified as: Type 3.1: A hard, comparatively non-absorbent, crêped kraft insulating paper made from base papers of low (L) or medium (M) permeability, such as Types 1.3-2M and 1.3-2L described in Table I of I E C Publication 554-1. Type 3.2: A soft, porous, crêped kraft insulating paper made from base papers of high (H) permeability, such as Type 1.2-2H described in Table I of I E C Publication 554-1.

Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper

GSO IEC 60554-1:2014 电气用纤维素纸的规格 第1部分：定义和一般要求

This part of the standard contains the definitions related to and the general requirements to be fulfilled by cellulosic papers for electrical purposes.

Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

GSO IEC 60763-2:2014 层压刨花板技术规范 第2部分：测试方法

This part of IEC 60763 gives methods of test applicable for the material classified in IEC 60763-1.

Specification for laminated pressboard - Part 2: Methods of test

GSO IEC 60763-3-1:2014 电气用压制纸层压板 第3部分：独立材料标准 数据表 1：预压层压板规格 LB 3.1.1、3.1.2、3.3.1 和 3.3.2 型

This sheet of IEC 60763-3 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2

GSO IEC 61629-1:2014 电气用芳纶压制纸板 第1部分：定义、区别和一般要求

This part of IEC 1629 contains the definitions, designations and general requirements of aramid pressboard for electrical purposes. Materials which conform to this specification meet established levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for the adequate performance in that application and not based on this specification alone. While the primary use of these materials is an electrical insulation, there is no intent to discourage their use in other applications for which their properties may make them suitable.

Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements

GSO IEC 60554-3-4:2014 电气用纤维素纸的规格 第3-4部分：独立材料规格 电解电容器纸

This sheet contains the requirements for electrolytic capacitor paper as described in Part 1, of the following types: Type Description 4.1 Absorbent separator paper, long fibres. 4.2 Absorbent separator paper, short fibres. 4.3 Non-absorbent paper.

Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper

GSO IEC 60641-2:2014 纸板和电气用纸板 第2部分：测试方法

This part of IEC 60641 applies to pressboard and presspaper for electrical purposes. The series does not apply to laminated material. This part specifies the test methods to be used in testing pressboard and presspaper for electrical purposes to meet the requirements prescribed in the specification sheets of Part 3. NOTE In this standard, reference is made in several places to ISO standards accompanied by a short description of the method used. It is to be understood that this short description is meant for identification purposes only and that all details should be taken from the ISO standard itself.

Pressboard and presspaper for electrical purposes - Part 2: Methods of tests

GSO IEC 60641-1:2014 电气用压制和压缩纸板 第1部分：定义和一般要求

This part of IEC 60641 contains definitions related to a classification of, and the general requirements to be fulfilled by, pressboard and presspaper for electrical purposes.

Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements

GSO IEC 60819-1:2014 电气用非纤维素纸 第1部分：定义和一般要求

This part of IEC 60819 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements

GSO IEC 60641-3-1:2014 电气用压制纸和压缩纸制成的面板规范 第3部分：独立材料标准 数据表 1：压制纸面板的要求 类型 B.0.1、B.2.1、B.2.3、B.3.1 、B.3.3、B.4.1、B.4.3、B.5.1、B.6.1 和 B.7.1

This International Standard gives the requirements for pressboard for electrical purposes comprised of 100 % sulphate wood pulp or a mixture of sulphate wood pulp and cotton. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

GSO IEC 60819-3-3:2014 电气用非纤维素纸 第3部分：独立材料标准 数据表 3：未填充的空白瓷砖片材（芳香族聚酰胺）

This sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers: Type 1: calendered paper; Type 2: calendered paper, with improved tearing resistance and conformability; Type 3: uncalendered paper; Type 4: calendered paper, with lower density for laminating. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner

Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

GSO IEC 60641-3-2:2014 压制纸面板规格和电气用压缩纸规格 第3部分：独立材料规格 数据表 2：类型 P.2.1、P.4.1、P.4.2、P.4.3 和 P.6.1

This part of IEC 60641 gives the requirements for presspaper for electrical purposes comprised of 100 % sulphate wood pulp, 100 % cotton or a mixture of sulphate wood pulp and cotton.

Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1