29.035.50 云母基材料 标准查询与下载

ASTM D748-18 适用于固定云母介电电容器的天然块状云母和云母膜的标准规范

4.1 The properties included in this specification are those required to identify the types of natural block mica and mica films (cut and uncut) suitable for use in the manufacture of fixed mica-dielectric capacitors. It is possible that other requirements will be necessary to identify particular characteristics. These will be added to the specification as their inclusion becomes generally desirable, and the necessary test data and methods become available. It is possible that natural block mica and mica films that do not conform to the requirements of this specification for capacitor use are capable of meeting the requirements for other critical electrical insulation purposes. 4.2 The system of classifying electrical quality of natural block and mica films (cut and uncut) covered by this specification is based on a combination of electrical and physical properties, and visual qualities specified herein, which the mica must possess. This system differs radically from past practices and previous concepts of mica quality for capacitor use. The electrical classification system does not discriminate against the presence of spots and stains in even first quality electrically selected mica, provided the mica conforms to specific and physical requirements. Appreciable amounts of air inclusions and waviness also are permitted in all electrical quality classes, provided the mica meets specific electrical and physical requirements. Mica meeting these requirements is acceptable without regard to color or origin. However, mica meeting these electrical and physical requirements but having lower visual quality than that meeting the requirements for the visual quality classification is not considered generally as desirable. 4.3 In capacitor fabrication, one or more pieces of cut film or block mica having lower than required electrical and physical properties will possibly prevent meeting the end requirements of the capacitor. It is therefore required that each piece of block (cut) or film (cut or uncut), or both, be tested for the electrical requirements and inspected for the visual requirements listed in this specification. 1.1 This specification covers natural block mica2 and mica films (cut and uncut) suitable for use in the manufacture of fixed mica-dielectric capacitors, based on electrical, visual, and physical properties as determined by tests specified herein. 1.2 The values stated in inch-pound units are to be regarded as standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors

ASTM D1677-17 用于电绝缘的未经处理的云母纸的取样和测试的标准方法

1.1 These methods cover procedures for sampling and testing untreated mica paper to be used as an electrical insulator or as a constituent of a composite material used for electrical insulating purposes. 1.2 The procedures2 appear in the following order: ASTM Method Procedures Sections References Apparent Density 12 ... Aqueous Extract Conductivity 32 and 33 D202 Conditioning 4 D685 Dielectric Strength 16 – 19 D149 Impregnation Time 20 – 24 D202 Moisture Content 26 – 28 D644 Roll Quality 25 ... Sampling 3 ... Tensile Strength 13 – 15 D828 Thickness 6 – 10 D374 Weight 11 D646 Weight Variability 29 – 31 ... 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

GSO IEC 60371-1:2015 云母绝缘材料规范 第1部分：定义和一般要求

This part of IEC 60371 gives definitions of terms used to describe built-up mica materials,products based on them and mica paper. It also deals with general requirements and conditions of supply.

Specification for insulating materials based on mica - Part 1: Definitions and general requirements

GSO IEC 60371-3-3:2015 基于云母的绝缘材料规范 第3部分：个别材料的规格 表3：加热设备用硬质云母材料

This sheet of the standard gives requirements for several types of rigid mica materials based on mica splittings or mica paper for application in electrical heating equipment. These products may be made from muscovite or phlogopite mica with a suitable bonding medium. The binder may be totally driven off in service, giving a material which needs to be supported, or may remain totally or partially, giving a self-supporting material; in this case, the binder shall have the necessary resistance to the operating temperature. The products may be supplied in sheets, strips or flat pieces. The minimum nominal thickness is 0.30 mm (mica splittings) and 0.20 mm (mica paper).

Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment

GSO IEC 60371-3-9:2015 云母绝缘材料 第3部分：整体材料规范 数据表 9：成型云母

This International Standard specifies the requirements for different types of moulding micanite. They are composed of mica splittings or mica paper, with or without rein-forcement,bonded with a suitable binder and may be supplied as sheets or rolls. Moulding micanites with B-stage resins are of a consistency ranging from rigid to soft. All types are mouldable when heated. This specification covers material having a nominal thickness from 0,10 mm to 7 mm. Materials which conform to this specification meet established levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

GSO IEC 60371-3-4:2015 云母绝缘材料规范 第3部分：单个材料规范 表 4：带有 B 级环氧树脂粘合剂的聚酯薄膜背衬云母纸

This International Standard gives requirements for electrical insulating materials made by combining mica paper with a single polyester film and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state with the resin in the B-stage for final cure after application. It may be supplied in the form of sheets or rolls. The specification covers material having nominal thickness from 0,16 mm to 0,23 mm.

Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

GSO IEC 60371-3-1:2015 云母绝缘材料规范 第3部分：单个材料的规范 数据表 1：逆变器隔板及其材料

This sheet of IEC 60371-3 applies to several types of rigid materials based on mica splittings or mica paper for commutator separators. These products shall be made from muscovite or phlogopite mica, built up from mica splittings or mica paper by the use of a suitable bonding medium. They are supplied in the following forms: – sheets in the dimensions in which they are pressed or after trimming; – strips cut from sheets; – commutator separators having the shapes and dimensions and in the conditions ordered by the user. The normal manufacturing thicknesses lie between 0,3 mm and 2 mm. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials

JB/T 901-2015 电气用云母箔

本标准规定了电气用云母箔的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以剥片云母或云母纸为基材，以合适的胶粘漆为胶粘剂，带有单面、双面或多层粘合补强材料，在一定温度下具有可塑性，所含B阶胶粘剂应用后能最终固化的云母箔。

Mica foil for electrical purpose

JB/T 900-2015 电气用衬垫云母板

本标准规定了电气绝缘用衬垫云母板的分类与命名、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以剥片云母为基材，以合适的胶粘漆为胶粘剂，经粘贴、烘焙、压制而成的硬质衬垫云母绝缘材料。

Rigid mica padding for electrical purposes

JB/T 7100-2015 电气用柔软云母板

本标准规定了电气用柔软云母板的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以剥片云母或云母纸为基材，带有或不带有补强材料，用适合的胶粘剂粘结而成的，在常态时具有柔软性的电气用柔软云母板。

Flexible micanite for electrical purpose

KS C IEC 60371-3-9:2014 基于云母的绝缘材料 第3部分：单个材料的规范 第 9 页：成型云母

이 표준은 여러 형태의 성형 마이카나이트에 대한 요구사항을 규정한다. 이 재료는 적절한 결합제로 결합하고 수지 강화제가 첨가되거나 첨가되지 않은 박피 마이카(mica splittings) 또는 집성 마이카(mica paper)로 구성되며, 박피 또는 롤로 공급될 수 있다.B단계의 수지를 함유한 성형 마이카나이트(moulding micanite)는 경질부터 연질까지 연속적인 범위를 가진다. 모든 종류의 마이카나이트는 가열 상태에서 성형이 가능하다.이 표준은 공칭 두께가 0.10 mm∼7 mm인 재료를 다룬다.이 표준에 부합하는 재료들은 확립된 성능 수준을 충족한다. 그러나 특정 응용을 위해 사용자가 재료를 선정할 때는 해당 응용에 적합한 성능에 필요한 실제 요구사항을 토대로 하여야 하며 이 표준만을 토대로 하여서는 안 된다.?

Insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 9: Moulding micanite

KS C IEC 60371-3-1-2014(2019) 基于云母的绝缘材料规范 - 第3部分:单个材料的规格 - 第1页:换向器分离器和材料

Specification for insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 1: Commutator separators and materials

KS C IEC 60371-3-9-2014(2019) 基于云母的绝缘材料 - 第3部分:单个材料的规格 - 第9页:成型Micanite

Insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 9: Moulding micanite

KS C IEC 60371-3-1:2014 基于云母的绝缘材料规范 第3部分：单个材料的规范 第 1 页：换向器隔板和材料

이 표준은 박피 마이카(mica splittings) 또는 정류자 격리판(commutator separators)용 집성 마이카(mica paper)에 근거한 몇 가지 형태의 단단한 재료에 적용된다. 이러한 제품들은 경질(muscovite, potassium alumino-silicate) 또는 연질(phlogopite, potassium matnesium alumino-silicate) 마이카로 만들어져야 하며, 적당한 결합제를 사용하여 박피 마이카 또는 집성 마이카로 제작되어야 한다. 제품들은 다음과 같은 형태로 제공된다.― 압축되거나 제단 후의 측정된 판(sheet)― 판으로부터 절단된 조각― 형태와 크기를 가지는 정류자 격리판 그리고 사용자에 의해 요구된 상태일반적인 제조 두께는 0.3 mm∼2 mm이다.이 표준에 부합하는 재료들은 확립된 성능 수준을 충족한다.그러나 특정 응용을 위해 사용자가 재료를 선정할 때에는 해당 응용에 적합한 성능에 필요한 실제 요구사항을 토대로 하여야 하며, 이 표준만을 토대로 하여서는 안 된다.?

Specification for insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 1: Commutator separators and materials

ASTM D748-14 固定式云母介电电容器用天然云母块和云母薄片的标准规格

4.1 The properties included in this specification are those required to identify the types of natural block mica and mica films (cut and uncut) suitable for use in the manufacture of fixed mica-dielectric capacitors. It is possible that other requirements will be necessary to identify particular characteristics. These will be added to the specification as their inclusion becomes generally desirable, and the necessary test data and methods become available. It is possible that natural block mica and mica films that do not conform to the requirements of this specification for capacitor use are capable of meeting the requirements for other critical electrical insulation purposes. 4.2 The system of classifying electrical quality of natural block and mica films (cut and uncut) covered by this specification is based on a combination of electrical and physical properties, and visual qualities specified herein, which the mica must possess. This system differs radically from past practices and previous concepts of mica quality for capacitor use. The electrical classification system does not discriminate against the presence of spots and stains in even first quality electrically selected mica, provided the mica conforms to specific and physical requirements. Appreciable amounts of air inclusions and waviness also are permitted in all electrical quality classes, provided the mica meets specific electrical and physical requirements. Mica meeting these requirements is acceptable without regard to color or origin. However, mica meeting these electrical and physical requirements but having lower visual quality than that meeting the requirements for the visual quality classification is not considered generally as desirable. 4.3 In capacitor fabrication, one or more pieces of cut film or block mica having lower than required electrical and physical properties will possibly prevent meeting the end requirements of the capacitor. It is therefore required that each piece of block (cut) or film (cut or uncut), or both, be tested for the electrical requirements and inspected for the visual requirements listed in this specification. 1.1 This specification covers natural block mica2 and mica films (cut and uncut) suitable for use in the manufacture of fixed mica-dielectric capacitors, based on electrical, visual, and physical properties as determined by tests specified herein. 1.2 The values stated in inch-pound units are to be regarded as standard.

Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors

GSO IEC 60371-2:2013 云母绝缘材料技术规范 第2部分：试验方法

Defines the methods of test which are applicable to built-up mica materials, products based on them and mica paper. The main changes from the previous edition are as follows: a) All clauses re-numbered. b) Relevant template of ISO 67 has been added to this standard as Annex A. c) Clause 8: Tensile strength and elongation at break Procedure modified to give "rate of movement" instead of "time limit". Different rate of movement for raw mica as opposed to reinforced and/or impregnated mica. d) Clause 11: Stiffness Size of test specimen revised. Wording modified so that standard covers materials using carriers other than woven glass cloth and materials that are 3-ply. Revision of terms ""machine direction" and "transverse direction". (These were incorrect in second edition (1987).) e) Clause 13: Elastic compression and plastic compression Tolerance on measurement of height of stack changed to within 0,01 mm. Times for change in pressure in procedure changed to 1 min. f) Clause 16: Electric strength Modified in line with Amendment 1 (1994) to the second edition (1987). Changes relate to latest edition of IEC 60243-1. g) Clause 19: Detection of defects and conductive particles Revised subclause.

Specification for insulating materials based on mica - Part 2: Methods of test

JIS C 2254:2011 电热设备用刚性云母材料

This Standard specifies requirements for rigid mica materials based on mica splittings or mica paper for application in electric heating equipment (hereafter referred to as "materials").

Rigid mica materials for electric heating equipment

KS C IEC 60371-1-2008(2023) 云母基绝缘材料规范第1部分:定义和一般要求

Specification for insulating materials based on mica－Part 1：Definition and general requirements

KS C IEC 60371-1:2008 云母基绝缘材料规范.第1部分:定义和通用要求

이 표준은 조립 마이카 재료와 마이카 제품류를 설명하는데 사용하는 용어 정의를 기술하고 있

Specification for insulating materials based on mica-Part 1:Definition and general requirements

KS C IEC 60371-1-2008(2018) 说明书基于云母绝缘材料 - 第1部分:定义和一般要求

Specification for insulating materials based on mica－Part 1：Definition and general requirements