29.035.50 云母基材料 标准查询与下载
共找到 145 条与 云母基材料 相关的标准，共 10 页
This International Standard specifies the requirements for an electrical insulating material containing mica paper with polyester film and with an epoxy resin binder for single conductor taping. The material is supplied in a flexible state with the resin in the B-stage for final cure after application. It is supplied in roll form. This specification refers only to single film, although compositions with polyester film facings of various thicknesses are available. The specification covers material having a nominal thickness from 0,07 mm to 0,12 mm. Materials which conform to this specification meet established levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Specification for insulating materials based on mica. Specifications for individual materials. Polyester film mica paper with an epoxy resin binder for single conductor taping
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1996-04-15
- 实施
- 1996-04-15
Requirements for electrical insulating materials made by combining mica paper with a single polyester film and impregnating the mica with an epoxy resin.
Specification for insulating materials based on mica. Specifications for individual materials. Polyester film-backed mica paper with a B-stage epoxy resin binder
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1996-02-15
- 实施
- 1996-02-15
This International Standard gives requirements for electrical insulating materials made by combining mica paper with glass fabric and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state with the resin in the B-stage for final cure after application. It may be supplied in the form of sheets or rolls. The specification covers material having nominal thickness from 0,09 mm to 0,28 mm.
Specification for insulating materials based on mica. Specifications for individual materials. Gloss-backed mica paper with a B-stage epoxy resin binder
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1996-02-15
- 实施
- 1996-02-15
Requirements for several types of rigid mica materials based on mica splittings or mica paper for applications in electrical heating equipment
Specification for insulating materials based on mica. Specifications for individual materials. Specification for rigid mica materials for heating equipment
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-12-15
- 实施
- 1995-12-15
Gives requirements for several types of mica materials based on mica splittings or mica paper for application in electrical heating equipment.
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 3: Specification for rigid mica materials for heating equipment
- ICS
- 29.035.50
- CCS
- 发布
- 1995-11-29
- 实施
- 1995-10-02
Gives requirements for materials made by combining mica paper with glass fabric and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state for final cure after application in the form of sheets or rolls.
Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
- ICS
- 29.035.50
- CCS
- 发布
- 1995-11-29
- 实施
- 2006-07-10
Gives requirements for materials made by combining mica paper with a single polyester film and impregnating the mica paper with an epoxy resin. The material is supplied in a flexible state for final cure after application in the form of sheets or rolls.
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder
- ICS
- 29.035.50
- CCS
- 发布
- 1995-11-29
- 实施
- 1995-10-02
本标准规定了用于真空压力浸渍的环氧玻璃粉云母带的型号、技术要求、试验方法、检验规则、标志、包装、运输、储存。 本标准适用于以云母纸为基材，以环氧胶粘漆味胶粘剂，单面或双面以电工用无碱玻璃布为补强材料，在常态下具有柔软性，用与之相容的浸渍树脂经真空压力浸渍绝缘工艺处理后固化成型的粉云母带。粉云母带的最终固化性能主要取决于所用的真空压力浸渍树脂。
Mica tape. Epoxy glass powder mica tape for vacuum pressure impregnation
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-11-24
- 实施
- 1996-06-01
Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 3 : specification for rigid mica materials for heating equipment.
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-09-01
- 实施
- 1995-09-20
This is Technical Corrigendum 1 to IEC 60371-3-8-1995 (Insulating materials based on mica Part 3: Specifications for individual materials Sheet 8: Mica paper tapes for flame-resistant security cables)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
Specifies the requirements for different types of moulding micanite. They are composed of mica splittings or mica paper, with or without reinforcement, bonded with a suitable binder and may be supplied as sheets or rolls. The requirements are applicable
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
This is Technical Corrigendum 1 to IEC 60371-3-7-1995 (Insulating materials based on mica Part 3: Specifications for individual materials Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
This standard is Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite; Corrigendum 1.
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
Specifies the requirements for an electrical insulating material containing mica paper with polyester film and with an epoxy resin binder for single conductor taping. The requirements are applicable to material having a nominal thickness from 0,07 mm to
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
Specifies the requirements for an electrical insulating material containing mica paper with glass fabric or plastic film and impregnated with a suitable resin. The product is designed for use in cables of operating after a fire. The requirements are appl
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
- ICS
- 29.035.50
- CCS
- K15
- 发布
- 1995-08
- 实施
