共找到 649 条与 电线和电缆 相关的标准,共 44 页
The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical
Objective Perceptual Video Quality Measurement Techniques for Digital Cable Television in the Presence of a Full Reference Series J: Cable Networks and Transmission of Television, Sound Programme and Other Multimedia Signals Measurement of the Quality of
The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technica
Pre-published Audio Code Requirements for the Provision of Bi-Directional Audio Service Over Cable Television Networks Using Cable Modems Series J: Transmission of Television, Sound Programme and Other Multimedia Signals
This annex is the baseline specification for the provision of the interaction channel for CATV networks.
Transmission Systems for Interactive Cable Television Services Annex A: Digital Video Broadcasting: DVB Interaction Channel for Cable TV (CATV) Distribution Systems Series J: Transmission of Television Sound Programme and Other Multimedia Signals - Intera
This Annex B defines the radio-frequency interface specification for high-speed data-over-cable systems. There are differences in the cable spectrum planning practices adopted for different networks in the world. Therefore two options for physical layer
Transmission Systems for Interactive Cable Television Services Annex B: Data-over-cable service interface specifications: Radio-frequency interface specification Series J: Cable Networks and Transmission of Television Sound Programme and Other Multimedia
This Recommendation is limited to rules which facilitate the carriage of both analogue and digital television signals of satisfactory quality on a hybrid link into the user's premises. Digital television signals are referred to in ITU-T 5.83,5.84 and ITU
Use of Hybrid Cable Television Links for the Secondary Distribution of Television into the User's Premises - Series J:Cable Networks and Transmission of Television Sound Programme and Other Multimedia Signals - Digital Transmission of Television Signals S
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release or otherwise affect the obligation of the manufacturer to comply with the specification requirements.
TOOL, FORMING, FOR ADJUSTABLE PLASTIC AND METAL CABLE STRAPS
This revision described below has been authorized for the document listed.
CABLES, RADIO FREQUENCY, COAXIAL, LOW NOISE, 50 OHMS
GB/T 2951规定了配电及通信用电缆和光缆,包括船舶及近海用电缆和光缆的聚合物绝缘和护套 材料的试验方法。 GB/T 2951的本部分规定了密度测定方法、吸水试验方法和收缩试验方法。这些方法适用于最普 通类型的绝缘和护套材料(弹性体、聚氯乙烯、聚乙烯、聚丙烯等)。
Common test methods for insulating and sheathing materials of electric and optical cables-Part 13:Methods for general application-Measurement for determining the density -Water absorption tests-Shrinkage test
MIL-HDBK-176, dated 17 May 1972, has been reviewed and determined to be valid for use in acquistion.
GUIDANCE FOR FLEXIBLE FLAT MULTICONDUCTOR CABLE (FLAT CONDUCTORS)
MIL-STD-685, dated 19 September 1988, has been reviewed and determined to be valid for use in acquistion.
IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS
MIL-STD-686C, dated 28 September 1990, has been reviewed and determined to be valid for use in acquistion.
CABLE AND CORD, ELECTRICAL; IDENTIFICATION MARKING AND COLOR CODING OF
This specification covers electrical cables consisting of unshielded and unjacketed, shielded, jacketed, or shielded and jacketed twisted pairs and triples, and shielded or shielded and jacketed singles. The cable is intended for internal wiring of electrical equipment for application temperatures of -40 to 105 degrees Centigrade (°C), or -65 to 200 °C. Cables constructed with polyvinyl chloride (PVC)-insulated wires or jackets are not to be used for aerospace applications.
CABLE, ELECTRICAL, SHIELDED SINGLES, SHIELDED AND JACKETED SINGLES, TWISTED PAIRS AND TRIPLES, INTERNAL HOOKUP, GENERAL SPECIFICATION FOR
This specification covers unshielded wire for hookup and lead wiring of electrical and electronic components and equipment.
WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
This supplement forms a part of MIL-DTL-16878G, dated 11 August 2000.
WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
This commercial item description (CID) covers single and multiple conductor cables and wires employing soft-annealed copper, copper-clad aluminum, 1350 aluminum, and 8000-series aluminum alloy conductors, insulated with synthetic rubber, thermoplastic, cross-linked-polyethylene,ethylene propylene, or chlorosulphonated polyethylene. These cables and wires are intended to be used for transmission of power in fixed type installations, and also for special purpose applications
CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION)
This ITU-T Recommendation deals with maintenance wavelength on fibres carrying signals without in-line optical amplifiers.ITU-T Recommendation L.25 "Optical Jibre cable network maintenance" defines comprehensive guidelines to maintain optical fibre and su
Maintenance wavelength on fibres carrying signals Study Group 6
ITU-T Recommendation L.39 was prepared by ITU-T Study Group 6 (1997-2000) and approved under the WTSC Resolution 1 procedure on 12 May 2000.
Investigation of the Soil Before Using Trenchless Techniques Series L: Construction Installation and Protection of Cables and Other Elements Of Outside Plant Study Group 6
Splices are critical points in the optical fibre network, as they strongly affect not only the quality of the links, but also their lifetime. In fact the splice shall ensure high quality and stability of performance with time. High quality in splicing is
Optical Fibre Joints Series L: Construction, Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6
This notice should be filed in front of MIL-C-82001 E, dated 07 February 1992.
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, INTERVEHICULAR (24 VOLT TO 12 VOLT REDUCTION)
This specification covers the general requirements for complete cable assemblies, with molded or attached plugs including any required built-eilne ctronics, used in aircraft intracommunications and intercommunications systems.
CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号