29.060 电线和电缆 标准查询与下载



共找到 649 条与 电线和电缆 相关的标准,共 44

This supplement forms a part of MIL-DTL-22442F, dated 1 April 2000.

CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR

ICS
29.060
CCS
K13
发布
2000-04-01
实施

Local access and other high density radio-relay service planning and system deployments have rapidly accelerated in the last few years in many countries.

Radio Transmission Systems for Fixed Broadband Wireless Access Based on Cable Modem Standards

ICS
29.060
CCS
K13
发布
2000-01-01
实施

that for relevant applications in sound and television broadcasting the protocols included in ITU-T Recommendation J.112 (03/98) should be used. A summary of ITU-T Recommendation J.112 is provided in Annex 1 to this Recommendation

Transmission Systems for Interactive Cable Television Services

ICS
29.060
CCS
K13
发布
2000-01-01
实施

ITU-T Recommendation L.45 was prepared by ITU-T Study Group 6 (1997-2000) and approved by the World Telecommunication Standardization Assembly (Montreal, 27 September - 6 October 2000.

Minimizing the effect on the environment from the outside plant in telecommunication networks Study Group 6

ICS
29.060
CCS
K13
发布
2000
实施

This CID covers solid, bunch-stranded, concentric-lay-stranded, and rope-lay-stranded round, uninsulated, copper conductors for use in electrical wire. Wires covered by this CID are intended to be used for electrical conductors in equipment and may be used as conductors in electrical cables.

WIRE, ELECTRICAL, COPPER (UNINSULATED) [Superseded: DLA QQ-W-343 G CANC NOTICE 1, DLA QQ-W-343 G, DLA QQ-W-343 F NOTICE 1, DLA QQ-W-343 F, DLA QQ-W-343 E (1), DLA QQ-W-343 E, DLA QQ-W-343 D (1), DLA QQ-W-343 D, DLA QQ-W-00343 C (1), DLA QQ-W-00

ICS
29.060
CCS
K13
发布
2000
实施

In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.

Electric Power Supply for Equipment Installed as Outside Plant Study Group 6

ICS
29.060
CCS
K13
发布
2000
实施

This Recommendation gives information and guidelines about access facilities using HFC ("Hybrid Fibre/Copper") networks.

Access Facilities Using Hybrid Fibre/Copper Networks Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6

ICS
29.060
CCS
K13
发布
2000
实施

T h i s s t a n d a r d g i v e s t h e g e n e r a l physical, electrical, and chemical methods f o r t e s t i n g i n s u l a t e d wire and cable for electrical purposes for conformance with the requirements of Federal and Military s p e c i f i c a t i o n s , a n d o t h e r r e l a t e d documents.

CABLE AND WIRE, INSULATED; METHODS OF TESTING

ICS
29.060
CCS
K13
发布
2000
实施

This Recommendation describes biological attacks and countermeasures for protection of telecommunication cables. It deals with the kinds of biological attack, weakness of cables, features of damage, and considers alternative ways of protecting the plant i

Protection of Telecommunication Cables and Plant from Biological Attack Study Group 6

ICS
29.060
CCS
K13
发布
2000
实施

This Recommendation:e makes a classification of different kind of works that are performed; escribes the drilling operation and installation procedures requirements; describes situations where trenchless techniques are recommended.

Use of Trenchless Techniques for the Construction of Underground Infrastructures for Telecommunication Cable Installation - Series L: Construction Installation and Protection of Cables and Other Elements of Outside Plant Study Group 6; 42 PP

ICS
29.060
CCS
K13
发布
1999-09-01
实施

  本标准规定了PL型全木结构交货盘的型号、规格、材料、技术要求及检验项目。本标准应与JB/T 8137.1-1999一起使用。

Delivery drums for electric wires and cables.Part 2:Wood delivery drums

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了PND型钢板冲压卷边机用线盘一般性的型号、规格、技术要求及检验项目。本标准应与JB/T 8997.1一起使用。 本标准适用于单位体积最大承载负荷为40N/dm3的一般型钢板冲压卷边机用线盘。

Machine spools with large bore for processing of electric wires and cables.Part 3:Common machine spools with pressed steel flanges

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了电线电缆大孔径机用线盘的分类与命名、规格、技术要求、检验和验收及标志、包装等内容。 本标准适用于电线电缆生产过程中使用的大孔径机用线盘。

Machine spools with large bore for processing of electric wires and cables.Part 1:General requirement

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了PND型钢板焊接机用线盘的型号、规格、技术要求及检验项目。 本标准应与JB/T 8997.1一起使用。 本标准适用于单位体积最大承载负荷为70N/dm3,并能在退火炉中使用的钢板焊接机用线盘。

Machine spools with large bore for processing of electric wires and cables.Part 2:Steel plate welded machine spools

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了公路车辆用低压电缆(电线)的技术要求、试验方法、检验规则、交货长度和包装。 本标准适用于以汽车为代表的公路车辆用低压电缆(电线)。

Road vehicles-low voltage cables(wires)

ICS
29.060
CCS
K10
发布
1999-08-06
实施
2000-01-01

  本标准适用于纸带绕包装置。 本标准必须与JB/T 4032.1一起使用。

Adaptable units of wire and cable machinery lapper.Part 2:Paper taping head

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

本标准规定了电线电缆绕交货盘的分类与命名、规格、检验和验收、使用和保障、标志、包装等内容。 本标准适用于电线电缆产品交货用的电缆盘及回收修复后的电缆盘,简称交货盘。 本标准不适用于绕组线用交货盘。

Delivery drums for electric wires and cables.Part 1:General requirements

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了PL型型钢复合结构交货盘的型号、规格、材料、技术要求及检验项目。本标准应与JB/T 8137.1-1999一起使用。

Delivery drums for electric wires and cables.Part 4:Steel shapes composite delivery drums with corrugated flanges

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

  本标准规定了PL型全钢瓦楞结构交货盘的型号、规格、材料、技术要求及检测项目。本标准应与JB/T 8137.1-1999一起使用。

Delivery drums for electric wires and cables.Part 3:Steel delivery drums with corrugated flanges

ICS
29.060
CCS
K13
发布
1999-08-06
实施
2000-01-01

Many countries are expanding their outside facilities for the ever-growing and increasingly sophisticated field of the telecommunication services. Therefore, it has become very important to maintain the outside plant in good order economically. In order

Application of Computers and Microprocessors to the Construction Installation and Protection of Telecommunication Cables

ICS
29.060
CCS
K13
发布
1999-01-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号