共找到 649 条与 电线和电缆 相关的标准,共 44 页
Administrations which decide to use for digital transmissions, and possibly also for particular types of analogue transmission, coaxial pairs smaller than the 1.2/4.4-mm coaxial pair should as far as possible choose pairs complying with the specifications
Characteristics of 0.7/2.9 mm Coaxial Cable Pairs - Transmission Media Characteristics (Study Group XV) 4 pp
This Recommendation relates to symmetric pair star-quad cables which have been designed earlier and used to provide 60 or 120 carrier telephone channels of analogue transmission systems on each quad pair.
Characteristics of Symmetric Pair Star-Quad Cables Designed Earlier for Analogue Transmission Systems and Being Used Now for Digital System Transmission at Bit Rates of 6 to 34 Mbit/s - Transmission Media Characteristics (Study Group XV) 5 pp
This Recommendation deals with cables designed for the transmission of standard digital systems (Recommendations of the G.900 series), although these cables can also be used to transmit digital signals with a lower bit rate and voice frequency signals. T
Characteristics of Symmetric Cable Pairs Usable Wholly for the Transmission of Digital Systems with a Bit Rate of up to 2 Mbits - Transmission Media Characteristics (Study Group XV) 4 pp
This specification covers tetrafluoroethylene resin (teflon) insulated copper hook-up and general purpe wire suitable for we in temperatures ranging from -65% to 200% (-85.F to 39PF).
Wire, Electrical, Insulated, Copper, High Temperature, Hook-Up and General Purpose (for 200 Degrees C Service) (Rev. 3)
In the case of looped measurement, a check should be carried out to ensure that the near-end section, allowance being made for the tolerance accepted on the length of these sections. Crosstalk attenuation between the ends of the circuit being measured i
Characteristics of Symmetric Cable Pairs Designed for the Transmission of Systems with Bit Rates of the Order of 6 to 34 Mbit/s - Transmission Media Characteristics (Study Group XV) 4 pp
Transmission system: all that is necessary in order to provide an adequately operational transmission path (e.g. 4 kHz channel) between the terminating interfaces. It includes translating equipment, line terminal equipment, line intermediate equipment, ca
Reliability and Availability of Analogue Cable Transmission Systems and Associated Equipments - Transmission Media Characteristics Study Group XV; 3 pp
Interconnection should be in conformity with Recommendation G.352.
18 MHz Systems on Standardized 1.2/4.4 mm Coaxial Cable Pairs - International Analogue Carrier Systems (Study Group XV) 1 pp
Recommendation G.341 also applies to systems conforming to the present Recommendation.
12 MHz Systems on Standardized 1.2/4.4 mm Coaxial Cable Pairs - International Analogue Carrier Systems (Study Group XV) 1 pp
The pilot at 4287 kHz cannot be used with television transmissions.
6 MHz Systems on Standardized 1.2/4.4 mm Coaxial Cable Pairs - International Analogue Carrier Systems (Study Group XV) 4 pp
Frequencies sent only over a system already withdrawn from service because of a fault may be selected by each Administration on the national level.
4 MHz Systems on Standardized 1.2/4.4 mm Coaxial Cable Pairs - International Analogue Carrier Systems (Study Group XV) 4 pp
This notice should be filed in front of MIL-C-6591A, dated 22 April 1952
THIMBLES, WIRE-CABLE, AIRCRAFT
The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.
WIRE, ELECTRICAL (TINSEL)
MIL-STD-685 dated 7 DECEMBER 1961 , has been revieaed and determined to be valid for use in acquisition.
IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS
CABLE ARRANGEMENT FOR MINIMUM STRAY MAGNETIC FIELD (METRIC)
CABLE ARRANGEMENT FOR MINIMUM STRAY MAGNETIC FIELD (METRIC)
MIL-H-l5317C, dated 16 February 1982, has been reviewed and determined to be valid for use in acquisition.
HOISTS, CHAIN OR WIRE ROPE, ELECTRIC POWER OPERATED, LUG, HOOK, OR TROLLEY SUSPENSION AND BASE MOUNTED
1. Domaine d'application 1.1 La présente norme s'applique aux fils et câbles monoconducteurs à isolant thermoplastique de grosseurs conformes à l'article 4.1.4, destinés à être installés conformément au Code canadien de l'électricité, Première partie sur des réseaux à tension nominale d'au plus 600 V.
Thermoplastic insulated wires and cables
Material in this Test Methods Manual was voluntarily established by Technical Committees of the IPC. This material is advisory only and its use or adaptation is entirely voluntary. IPC disclaims all liability of any kind as to the use, application, or adaptation of this material. Users are also wholly responsible for protecting themselves against all claims or liabilities for patent infringement. Equipment referenced is for the convenience of the user and does not imply endorsement by the IPC.
Flammability, Flexible Flat Cable
This Recommendation covers digital line systems for the transmission of signals based on the 2048 kbit/s hierarchy on symmetric pair cables and includes systems operating at the following bit rates
DIGITAL LINE SYSTEMS BASED ON THE 2048 kbit/s HIERARCHY ON SYMMETRIC PAIR CABLES
it is desirable to measure the performance of cable systems for frequency-division multiplex telephonyunder conditions closely approaching those of actual operation
Measurement of Circuit Noise in Cable Systems Using a Uniform-Spectrum Random Noise Loading - International Analogue Carrier Systems (Study Group XV) 11 pp
MIL-C-S0919B(AR) dated, 19 MARCH 1983, has been reviewed and determined to be valid for use in acquisition.
CLIP, CORD, DETONATING: M1
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号