29.060.01 电线和电缆综合 标准查询与下载

JB/T 5812-2008 绕组线漆包设备.型式尺寸

本标准规定了绕组线漆绝缘电热式烘涂设备的型式尺寸。 本标准适用于在圆形或矩形导体上烘涂单一或复合漆膜制造漆包线的设备。 本标准的各项规定适用于产品设计、制造、验收、鉴定和评定质量。

Enamelling machines for round winding wires and rectangular wires.Types and sizes

SN/T 0232.1-2007 进出口电线电缆检验规程.第1部分:通用要求

SN/T 0232的本部分规定了进出口电线电缆的通用要求、检验及判定。 本部分适用于塑料、橡皮或纸作绝缘，用退火铜线、无镀层铝线或铝合金线作导体的电线电缆，如：电气装备用电线电缆、电力电缆、通信电缆等。绕组线、裸电线部分适用。 本部分不适用于光缆。

Rules for the inspection of cable and wire for import and export.Part1:General requirements

ANSI/NECA/NEMA 105-2007 金属电缆盘系统的安装和维护用标准

This standard describes installation and maintenance procedures for metal cable tray systems.

Standard for Installing and Maintaining Metal Cable Tray Systems

UL 2556-2007 电线和电缆的试验方法

This standard describes the apparatus, test methods, and formulas to be used in carrying out the tests and calculations required by wire and cable standards. Note: Specific acceptance requirements are found in individual product standards.

Wire and cable test methods

DS/IEC/TR 60344:2007 低频电缆和电线的普通和涂层铜导体直流电阻的计算 应用指南

This Technical Report applies to low-frequency cables and wires for telecommunication and gives a general method for calculating the resistance of copper conductors.

Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

JB/T 6758.3-2007 换位导线 第3部分:无纸捆绑型缩醛漆包换位导线

JB/T 6758的本部分规定了无纸绝缘层捆绑型缩醛漆包换位导线的一般要求。换位线芯采用120级自粘性缩醛漆包铜扁线（热固性环氧树脂自粘层），网状绳捆型采用聚酯纤维绳捆绑，网格捆绑型采用聚酯纤维非织带、环氧树酯玻璃纤维布带或带孔型的绝缘纸带绕包，铜导体既可以是普通软铜线，也可以是半硬铜线。 本部分应与JB/T 6758.1一起使用。

Continuously transposed conductors Part 3: Less paper insulated netting-typed continuously transposed conductors of polyvinyl acetal enamelled copper wires

JB/T 6758.1-2007 换位导线 第1部分:一般规定

JB/T 6758的本部分规定了换位导线的型号、产品品种结构、技术要求、验收规则和包装标志。 本部分应与JB／T 6758后续各部分产品标准一起使用。 换位导线适用于各种油浸式、干式变压器、电抗器等电器绕组。

Continuously transposed conductors-Part 1: General requirements

JB/T 6758.2-2007 换位导线 第2部分:纸绝缘缩醛漆包换位导线

JB/T 6758的本部分规定了纸绝缘缩醛漆包换位导线的一般要求。漆包扁线可以是120级缩醛漆包铜扁线，或在其外面再涂以热固性环氧棚旨自粘层的自粘性缩醛漆包铜扁线，铜导体既可以是普通软铜线，也可以是半硬铜线。本部分应与JB/T 6758.1一起使用。 纸绝缘缩醛漆包换位导线适用于油浸式变压器或电器的绕组线圈。

Continuously transposed conductors Part 2: Paper-insulated continuously transposed conductors of polyvinyl acetal enamelled copper wires

DS/HD 361 S3/A1:2006 电缆标识系统

Delete the existing wording and insert the following:This Harmonisation Document details a designation system for harmonised power cables and cords, of rated voltage up to and including 450/750 V.NOTE The use of the system for Recognised National Types of cable or cord has been withdrawn by CENELEC TC 20.For non-harmonised cables of rated voltage up to and including 450/750 V, National Committees are permitted to use any designation that does not conflict with this HD, but see Tables 1a and 4 for recommendations.

System for cable designation

UL 62-2006 柔性绳和电缆

This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables, rated 600 V maximum, and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas (Mexican Electrical Code [MEC]), in Mexico, and NFPA 70, National Electrical Code (NEC), in the United States. 1.2 Products included: This standard covers the following products: a) service cords; b) elevator cables; c) hoistway cables; d) heater cords; e) range and dryer cords; f) cords for decorative lighting; g) tinsel and lamp cords; and h) special use cords. 1.3 National differences In cases where product types are not approved in all three countries, a national difference is indicated by superscripts, as shown below: Superscript letter // National difference. c For use in Canada only; m For use in Mexico only; u For use in United States only; c,m For use in Canada and Mexico only; c,u For use in Canada and United States only; m,u For use in Mexico and United States only.

Flexible cords and cables

DS/EN 60228:2006 绝缘电缆的导体

This standard specifies the nominal cross-sectional areas, in the range 0,5 mm2S to 2500 mm2S, for conductors in electric power cables and cords of a wide range of types. Requirements for numbers and sizes of wires and resistance values are also included. These conductors include solid and stranded copper, aluminium and aluminium alloy conductors in cables for fixed installations and flexible copper conductors.

Conductors of insulated cables

CSA C22.2 No.49-2006 软电线和电缆

This CSA Standard is a joint Standard with UL 62, and ANCE NMX-J-436. 1 Scope 1.1 General This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables, rated 600 V maximum, and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas (Mexican Electrical Code [MEC]), in Mexico, and NFPA 70, National Electrical Code (NEC), in the United States. 1.2 Products included This standard covers the following products: (a) service cords; (b) elevator cables; (c) hoistway cables; (d) heater cords; (e) range and dryer cords; (f) cords for decorative lighting; (g) tinsel and lamp cords; and (h) special use cords.

Flexible Cords and Cables

ANSI/UL 62-2006 固定设备配线和软线

This bulletin proposes a further revision to the Proposed Trinational UL 62 as a result of comments received on the Subject 62 bulletin dated November 11, 2005.

Flexible Cord and Fixture Wire

KS C IEC 61084-2-2-2005(2010) 电气装置用电缆槽和管道系统第2－2部分:特殊要求地板下和平底安装用电缆槽系统和电缆管道系统

Cable trunking and ducting systems for electrical installations－Part 2－2：Particular requirements－Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations

ANSI/UL 2556-2005 电线和电缆的标准试验方法

The tri-national UL 2556 standard is being issued to harmonize the UL, Mexican, and Canadian measurement and test methods applicable to the flexible cord and power wire products that are covered in the standards currently being harmonized (UL 44, 62, and 83 in the US) and other wire products.

Standard Test Methods for Wires and Cables (Bulletin)

IEC 60851-4:2005 绕组线试验方法 第4部分:化学性能

GB／T 4074的本部分规定了下列试验方法： ——试验方法12：耐溶剂； ——试验方法16：耐冷冻剂； ——试验方法17：直焊性； 一一试验方法20：耐水解和耐变压器油。 定义、试验方法总则和绕组线试验方法一览表见GB／T 4074．1。

Winding wires-Test methods-Part4:Chemical properties

JB/T 10491.2-2004 额定电压450/750V及以下交联聚烯烃绝缘电线和电缆.第2部分:耐热105℃交联聚烯烃绝缘电线和电缆

本部分规定了额定电压450/750V及以下105℃交联聚烯烃绝缘电缆的型号、规定、技术要求和检验。 　　本部分适用于额定电压450/750V及以下有耐热105℃固定布线和电力、电子设备内部连接用铜导体、交联聚烯烃绝缘电缆。

Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part 2: Cross-linked polyolefin insulated wires and cables for maximum conductor temperature of 105℃ in normal operation

JB/T 10491.3-2004 额定电压450/750V及以下交联聚烯烃绝缘电线和电缆.第3部分:耐热125℃交联聚烯烃绝缘电线和电缆

本部分规定了额定电压450/750V及以下125℃交联聚烯烃绝缘电缆的型号、规定、技术要求和检验。 　　本部分适用于额定电压450/750V及以下有耐热125℃固定布线和电力、电子设备内部连接用铜导体、交联聚烯烃绝缘电缆。

Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part 3: cross-linked polyolefin insulated wires and cables for maximum conductor temperature of 125℃ in normal operation

JB/T 10491.4-2004 额定电压450/750V及以下交联聚烯烃绝缘电线和电缆.第4部分:耐热150℃交联聚烯烃绝缘电线和电缆

本部分规定了额定电压450/750V及以下150℃交联阻燃聚烯烃绝缘电缆的型号、规定、技术要求和检验。 　　本部分适用于额定电压450/750V及以下有耐热150℃固定布线和电力、电子设备内部连接用铜导体、交联聚烯烃绝缘电缆。

Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part 4: cross-linked polyolefine insulated wires and cables for maximum conductor temperature of 150℃ in normal operation

JB/T 10491.1-2004 额定电压450/750V及以下交联聚烯烃绝缘电线和电缆.第1部分:一般规定

本部分规定了额定电压450/750V及以下交联聚烯烃绝缘电线和电缆的产品结构、一般技术要求、试验、验收规则、交货长度、标志和包装。 　　本部分适用于额定电压450/750V及以下有耐热要求的固定布线和电力、电子设备内部连接用铜导体交联聚烯烃绝缘电线和电缆。

Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V Part 1: General requirements