29.080.10 绝缘子 标准查询与下载

DL/T 626-2015 劣化悬式绝缘子检测规程

本标准规定了交流、直流电力系统用悬式绝缘子在安装、运行中进行检测的一般技术要求、检测方法及判定准则。 本标准适用于标称电压高于1000V的交流、直流架空电力线路、发电厂、变电站及换流站用盘形悬式瓷、玻璃绝缘子和棒形悬式复合绝缘子（以下简称绝缘子）。

Aging suspension insulators inspection rule

DL/T 1000.2-2015 标称电压高于1000V架空线路用绝缘子使用导则 第2部分：直流系统用瓷或玻璃绝缘子

本部分规定了标称电压高于1500V的直流架空线路绝缘子的一般技术要求、选择原则、检验、验收、现场储存和运输、安装、运行维护。 本部分适用于标称电压高于1500V的直流架空线路、换流站用悬式瓷或玻璃绝缘子（简称绝缘子）。 安装地点的海拔为1000m以下，环境温度为-40℃~+40℃。

Application guide of insulators for overhand lines with a nominal voltage over 1000V.Part 2:Ceramic or glass insulator for d.c. system

DL/T 1470-2015 交流系统用盘形悬式复合瓷或玻璃绝缘子串元件

本标准规定了标称电压高于1000V、频率为50Hz的交流系统用盘形悬式复合瓷或玻璃绝缘子串元件的型号及结构尺寸、技术要求、检验规则、试验方法、验收、包装、运输和储存。 本标准适用于交流架空电力线路、发电厂及变电站用盘形悬式复合瓷或玻璃绝缘子（简称绝缘子）。

Cap and pin suspension ceramic or glass string insulators unit with composite shed for a.c. systems

DL/T 1469-2015 输变电设备外绝缘用硅橡胶辅助伞裙使用导则

本标准规定了输变电设备外绝缘用硅橡胶辅助伞裙(简称辅助伞裙)的基本技术要求、检验规则、包装与贮存、施工、验收及运行维护等。 本标准适用于110kV及以上交直流系统、环境温度-40℃~+40℃、海拔1000m以下条件下运行的输变电设备(包括支柱绝缘子、套管和盘形悬式绝缘子等，不包括避雷器)外绝缘用硅橡胶辅助伞裙。

Application guide of auxiliary silicone rubber shed for transmission and substation equipment external insulation

DL/T 1472.2-2015 换流站直流场用支柱绝缘子 第2部分：尺寸与特性

Post insulators for d.c. field of converter stations part 2: dimensions and characteristics

BS PD IEC/TS 61245:2015 直流系统用高压陶瓷和玻璃绝缘子的人工污染试验

Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems

IEC TS 61245:2015 直流系统用高压绝缘子的人工污秽试验

Artificial pollution tests on high-voltage insulators to be used on d.c systems

KS C 3836-2014 配电用球形支座悬式绝缘子

Ball and socket type suspension insulator

KS C IEC 62217:2014 用于室内和室外的聚合物高压绝缘子 一般定义 测试方法和验收标准

Polymeric insulators for indoor and outdoor use with a nominal voltage >1 000 V — General definitions, test methods and acceptance criteria

KS C IEC 62231:2014 交流电压大于 1 000 V 至 245 kV 的变电站用复合站柱绝缘子 定义、试验方法和验收标准

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria

KS C IEC 61211:2014 标称电压大于 1 000 V 的架空线路用陶瓷材料或玻璃绝缘子 空气中的脉冲击穿试验

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V — Impulse puncture testing in air

KS C IEC 62231-2014(2019) 带变电站的复合站柱式绝缘子电压大于1000 V至245 kV - 定义 测试方法和验收标准

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV — Definitions, test methods and acceptance criteria

KS C IEC 62223:2014 绝缘体 术语和定义词汇表

Insulators — Glossary of terms and definitions

KS C 3836-2014(2019) 球窝式悬式绝缘子

Ball and socket type suspension insulator

KS C IEC 61211-2014(2019) 陶瓷材料或玻璃绝缘子 用于标称电压大于1 000 V的架空线 - 空气中的脉冲穿刺测试

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V — Impulse puncture testing in air

KS C IEC 61109:2014 额定电压大于1000V的交流架空电线复合绝缘子的定义 试验方法和验收准则

Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V — Definitions, test methods and acceptance criteria

KS C IEC 62223-2014(2019) 绝缘子 - 词汇表和定义

Insulators — Glossary of terms and definitions

GSO IEC 61467:2014 架空线路绝缘子 标称电压高于 1000 V 线路的绝缘子紧固件和组件 交流电弧测试

This International Standard applies to insulator strings and sets comprising string insulator units of ceramic material, glass or composite material for use on a.c. overhead lines and traction lines with a nominal voltage above 1 000 V and a frequency between 15 Hz and 100 Hz. This standard also applies to insulator strings or sets of similar design used in substations. This standard establishes a standard test procedure for power arc tests on insulator sets. It also establishes a standard test procedure for power arc tests on short strings. This standard does not apply to insulator sets mounted on non-metallic poles or towers. This standard cannot be directly applied to line post insulators or sets, or to insulating structures such as braced line-posts, since their mounting arrangement cannot be reproduced by the standard arrangements as described herein. However, this standard can be used as a basis for agreement for tests on such insulators and arrangements. The object of this standard is – to define the terms used, – to prescribe a standard test procedure, – to prescribe criteria to evaluate the results of the tests. Power arc tests are not an obligatory element of line insulator specifications. The standard test procedures and the evaluation criteria described in this standard are intended to provide testing guidance when power arc tests are felt to be necessary. It is not the object of this standard to introduce a general obligation to execute these tests.

Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests

GSO IEC 62217:2014 室内和室外用聚合物高压绝缘子 一般定义、测试方法和验收标准

This International Standard is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this standard include both solid core and hollow insulators. They are intended for use on HV overhead lines and in indoor and outdoor equipment. The object of this standard is – to define the common terms used for polymeric insulators; – to prescribe common test methods for design tests on polymeric insulators; – to prescribe acceptance or failure criteria, if applicable; These tests, criteria and recommendations are intended to ensure a satisfactory life-time under normal operating and environmental conditions (see Clause 5). This standard shall only be applied in conjunction with the relevant product standard.

Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria

GSO IEC 62231:2014 交流变电站和电压大于 1000 V 至 245 kV 的已安装变电站中的安装绝缘子 定义、测试方法和验收标准

This International Standard applies to composite station post insulators consisting of a load bearing cylindrical insulating solid core made of resin impregnated fibres, a housing (outside the insulating solid core) made of elastomer material (e.g. silicone or ethylene-propylene) and end fittings attached to the insulating core. Composite station post insulators covered by this standard are subjected to cantilever, torsion, tension and compression loads. They are intended for substations with a.c. voltages greater than 1 000 V up to 245 kV. The object of this standard is – to define the terms used, – to prescribe test methods, – to prescribe acceptance or failure criteria. This standard does not include requirements dealing with the choice of insulators for specific operating conditions.

Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria