29.100.99 电气设备用其他元件 标准查询与下载

IEC 60529:1989/COR3:2009 外壳防护等级(IP代码).勘误表3

Degrees of protection provided by enclosures (IP code); Corrigendum 3

IEC 60529:1989/COR2:2007 外壳防护等级(IP代码).技术勘误2

This standard is Degrees of protection provided by enclosures (IP code); Corrigendum 2.

Degrees of protection provided by enclosures (IP code); Corrigendum 2

ANSI/UL 50-2007 接线柜和接线盒

Standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the applicable electrical codes for: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and b) Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P.Covers the non environmental construction and performance requirements for enclosures to provide a degree of protection to personnel against incidental contact with the enclosed equipment. The additional environmental construction and performance requirements for enclosures are located in C22.2 No. 94.2, UL 50E, and NMX-J-235/2-ANCE.

Cabinets and Boxes

UL 50-2007 非环境考虑的电气设备用外壳

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P. This standard covers the non-environmental construction and performance requirements for enclosures to provide a degree of protection to personnel against incidental contact with the enclosed equipment. The additional environmental construction and performance requirements for enclosures are located in C22.2 No. 94.2, UL 50E, and NMX-J-235/2-ANCE (See Annex b, Ref. No. 14), which are intended to be used in conjunction with this standard. Where an individual product standard contains requirements that are at variance with those of this standard, the requirements of the individual product standard take precedence. In the United States and Mexico, cabinets and cutout boxes and junction and pull boxes are covered by Clauses 9 and 10 of this Standard. In Canada, junction boxes, cutout boxes, and pull boxes are covered by CSA C22.2 No. 40 and are not covered by this standard. See Annex b, Ref. No. 11. 1.5 Outlet boxes having a volume of not more than 1640 cm3 (100 in3) are covered by CSA C22.2 No. 18, NMX-J-023/1-ANCE, and the UL 514 series (see Annex b, Ref. No. 6 and 12) and are not covered by this standard. 1.6 In Canada and the United States , swimming pool type junction boxes are covered by CSA C22.2 No. 89 and UL 1241 (see Annex b, Ref. No. 10) and are not covered by this standard.

Enclosures for electrical equipment, non-environmental considerations

UL 50E-2007 环境考虑的电气设备用外壳

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K, and 13; and b) Enclosures for indoor or outdoor locations, Types 3, 3R, 3S, 4, 4X, 6, and 6P. This standard covers additional environmental construction and performance requirements for enclosures. The general requirements for enclosures are contained in standard CSA C22.2 No. 94.1, UL 50, and NMX-J-235/1-ANCE (See Annex b, Ref. No. 10) or the end-use product standards that are to be used in conjunction with this standard. This standard does not cover the requirements for protection of devices against conditions such as condensation, icing, corrosion, or contamination that may occur within the enclosure or that may enter via conduit or unsealed openings. Where an individual product standard contains requirements that are at variance with those of this standard, the requirements of the individual product standard take precedence.

Enclosures for electrical equipment, environmental considerations

JB/T 10709-2007 低压电器通信适配器

本标准适用于低压电器数据通信不同总线协议转换的适配器（以下简称适配器）的工作条件、技术参数、性能要求及试验方法等。 DeviceNet-Modbus适配器用于将具有Modbus接口的低压设备接入DeviceNet总线，它向下通过Modbus协议，RS485串行接口与断路器等设备连接，向上通过DeviceNet接口接入DevceNet总线。通过对设备数据的合理安排和协议的转换，使通常的带Modbus接口的设备采集的数据可以传给 DeviceNet主站，将DeviceNet主站的命令下传给设备，并满足DeviceNet网络的基本要求。

Communication adapter for low-voltage electrical apparatus

JB/T 10542-2006 低压电器通信规约

本标准规定了低压电器通信规约，用于现场总线系统的通信。采用本标准的低压电器可直接或通过通信适配器与Modbus、DeviceNet、Profibus-DP等现场总线系统通信。 本标准规定了低压电器的数据通信参数表、相关的说明及检测的要求。

Communication protocol of low-voltage electrical apparatus

UL 50E BULLETINS-2006 CSDS 08/25/2006 (12p)

Covers electrical equipment enclosures for use in accordance with the National Electrical Code, NFPA 70. Specific applications covered by this standard include cabinets and cutout boxes and junction and pull boxes. Each type of enclosure covered by this standard is described in general and functional terms where practicable, and omits reference to structural details and specific applications except where they are essential to the identification of the enclosure type. Such additional details and specifications are included in applicable standards for the end-product involved.

CSDS 08/25/2006 (12p)

NF C20-015*NF EN 62262:2004 抗外部机械冲击的电气设备外壳的防护等级(IK码)

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK codes).

SJ 52453/3-2003 XGS208/160H型钐钴稀土永磁磁环系列详细规范

Type XGS208/160H SmCo rare-earth permanent magnet ring series, detail specification for

SANS 60670-22:2003 家用和类似固定电气装置的电气附件用机箱和外壳．第22部分：连接机箱和外壳的特殊要求

Applies to connecting boxes for junctions or tappings (or both), and enclosures and parts of enclosures for electrical accessories with a rated voltage not exceeding 1 000 V a.c. and 1 500 V d.c. intended for household or similar fixed electrical install

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures

IEC 60529:1989/COR1:2003 外壳防护等级(IP代码)

This standard is Degrees of protection provided by enclosures (IP code); Corrigendum 1.

Degrees of protection provided by enclosures (IP code); Corrigendum 1

UL 50 BULLETINS-2003 7/8/2003（10p）, 2/13/2003（96p）

Covers electrical equipment enclosures for use in accordance with the National Electrical Code, NFPA 70. Specific applications covered by this standard include cabinets and cutout boxes and junction and pull boxes. Each type of enclosure covered by this standard is described in general and functional terms where practicable, and omits reference to structural details and specific applications except where they are essential to the identification of the enclosure type. Such additional details and specifications are included in applicable standards for the end-product involved.

7/8/2003 (10p), 2/13/2003 (96p)

UL 50E BULLETINS-2001 (草案)(草案)电气设备用外壳环境UL安全标准

Covers electrical equipment enclosures for use in accordance with the National Electrical Code, NFPA 70. Specific applications covered by this standard include cabinets and cutout boxes and junction and pull boxes. Each type of enclosure covered by this standard is described in general and functional terms where practicable, and omits reference to structural details and specific applications except where they are essential to the identification of the enclosure type. Such additional details and specifications are included in applicable standards for the end-product involved.

(Draft)(DRAFT) UL Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations

ARINC 628P1-3 ITEM 7.0-2001 可交换性标准投影录像(监控器)

Interchangeability Standards - Projection Video (Overhead Monitor)

Interchangeability Standards - Projection Video (Overhead Monitor)

UL 50 BULLETINS-2001

Covers electrical equipment enclosures for use in accordance with the National Electrical Code, NFPA 70. Specific applications covered by this standard include cabinets and cutout boxes and junction and pull boxes. Each type of enclosure covered by this standard is described in general and functional terms where practicable, and omits reference to structural details and specific applications except where they are essential to the identification of the enclosure type. Such additional details and specifications are included in applicable standards for the end-product involved.

3/30/2001 (62p)

DL/T 712-2000 火力发电厂凝汽器管选材导则

Guideline for the selection of condenser tube materials in power plant

DIN EN 60529:2000 由外壳提供的防护等级(国际防护等级代码)

Degrees of protection provided by enclosures (IP code) (IEC 60529:1989 + A1:1999); German version EN 60529:1991 + A1:2000

NF C20-010/A1*NF EN 60529/A1:2000 外壳提供的保护程度 (IP 代码)

Degrees of protection provided by enclosures (IP Code).

IEC 60529:1989/AMD1:1999 由外壳提供的防护等级(IP代码) 修改件1

This standard is Degrees of protection provided by enclosures (IP code); Amendment 1.

Degrees of protection provided by enclosures (IP code); Amendment 1