29.120.20 连接装置 标准查询与下载

ANSI/ICEA S-76-474-2011 中性线支撑的额定值600 V的抗风化挤制绝缘电力电缆组件

Standard for Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts

ANSI/EIA 364-13E:2011 电气连接器和套筒的配合和分离应力试验步骤

This standards establishesa method to determine the forces required to mate and unmate electrical connectors or protective caps with connectors, connectors/sockets with gages or devices.

Mating and Unmating Force Test Procedure for Electrical Connectors and Sockets

ANSI/EIA 364-17C:2011 电连接器和插座的有/无电力负荷测试规程的温度寿命

Establishes a test method to determine the ability of an electrical connector and sockets to withstand elevated temperatures with or without electrical loading.

Temperature Life with and without Electrical Load Test Procedure for Electrical Connectors and Sockets

ANSI C119.6-2011 电气连接器标准.铝和铜导线用额定电压小于等于600 V的非密封多端k口连接系统

Covers non-sealed, multiport distribution connectors rated 600 V or less used to make electrical connections between aluminum-to-aluminum, aluminum-to-copper or copper-to-copper conductors for above-grade electric utility applications.

Standard for Electric Connectors - Non-Sealed, Multiport Connector Systems Rated 600 V or Less for Aluminum and Copper Conductors

SNI 7610-2011 绝缘液体在电应力和电离作用下的气化

Gassing of insulating liquids under electrical stress and ionization

SAE AS90362A-2010 115/200 V,400 Hz飞行器外接电源插座接头

CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ

JIS C 2805:2010 铜导体用卷曲式终端接线盒

Crimp-type terminal lugs for copper conductors

IEC 61210:2010 连接装置.电气铜导体用片式快速插接件.安全性要求

This International Standard applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part of an equipment or of a component, or as a separate entity. This standard establishes uniform requirements for the dimensions, performance characteristics and test program. The connected electrical copper conductors shall be flexible or rigid stranded, having a crosssectional area up to and including 6 mm2 or rigid solid having a cross-sectional area up to and including 2,5 mm2. This standard shall not be used for connecting aluminum conductors. The rated voltage shall not exceed 1 000 V a.c. with a frequency up to and including 1 000 Hz, and 1 500 V d.c., and having the temperature limits applicable to materials used within this standard.

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

CSA C22.2 No.158-2010(R2019) 接线端子

Scope 1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These terminal blocks are intended to support permanently and to insulate wire terminations and joints from each other and from the surface on which the terminal block is mounted, where the absence of such support or insulation could result in a hazard. 1.3 Terminal blocks can be of various designs, such as sectional, modular, or one-piece. 1.4 Terminal blocks can employ a combination of connectors. 1.5 In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

Terminal blocks

LST EN 60320-2-4-2006/A1-2010 家用和类似一般用途的器具耦合器 第 2-4 部分：取决于器具重量的器具耦合器接合（IEC 60320-2-4:2005/A1:2009）

Appliance couplers for household and similar general purposes -- Part 2-4: Appliance couplers dependent on appliance weight for engagement (IEC 60320-2-4:2005/A1:2009)

ASTM B942-10 夹具线终端电接触性规范和质量保证的标准指南

The purpose of this guide is to provide end-product manufacturers and other users with technical information and methods recommended towards the achievement of successful application of crimped wire terminals. For any given use, there is generally a choice of terminal types available, employing different mechanical design, materials, and installation tooling. Although terminals available to choose from may be similarly rated, typically according to wire sizes and combinations, their electrical contact performance in the end product may vary substantially. For many applications, the end-product reliability and user safety is substantially influenced by the choice of terminal and the quality of the completed termination. This guidance document contains specialized information on selection, assembly, and quality control of crimped wire terminals, covering aspects considered to be necessary to achieve reliable long-term operation in the intended application. This information is not generally found in commercial literature or textbooks. The methods discussed utilize connection resistance as the primary measure of termination quality, and change of connection resistance with time as the measure of termination deterioration. The methods are based on a foundation of modern electrical contact theory and practice.1.1 This guide contains practices for specifying and evaluating the electrical contact performance of crimped-type terminations with solid or stranded conductors. 1.2 This guide provides information relevant to the electrical contact performance of a crimped wire termination. It does not cover other aspects of selection and use of crimped terminals. 1.3 The methods discussed in this guide apply only to the wire termination, which is the electrical contact interface between the conductor(s) and the terminal. Other aspects important to terminal evaluation, such as the properties and performance of electrical insulation, the effectiveness of strain relief features, and the quality of contact between the terminal and other electrical circuit elements, are not included. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

ANSI/EIA 364-41E:2010 电器连接器用电缆挠曲试验程序

Establishes a method to determine the effectiveness of circular jacketed cable to plug seal, or flat cable to plug seal or interface to withstand strain under repeated alternating cable-flexing stresses as experienced in use with cable strain-relief design electrical connectors

Cable Flexing Test Procedure for Electrical Connectors

ASTM B942-10e1 夹具线终端电接触性规范和质量保证的标准指南

The purpose of this guide is to provide end-product manufacturers and other users with technical information and methods recommended towards the achievement of successful application of crimped wire terminals. For any given use, there is generally a choice of terminal types available, employing different mechanical design, materials, and installation tooling. Although terminals available to choose from may be similarly rated, typically according to wire sizes and combinations, their electrical contact performance in the end product may vary substantially. For many applications, the end-product reliability and user safety is substantially influenced by the choice of terminal and the quality of the completed termination. This guidance document contains specialized information on selection, assembly, and quality control of crimped wire terminals, covering aspects considered to be necessary to achieve reliable long-term operation in the intended application. This information is not generally found in commercial literature or textbooks. The methods discussed utilize connection resistance as the primary measure of termination quality, and change of connection resistance with time as the measure of termination deterioration. The methods are based on a foundation of modern electrical contact theory and practice.1.1 This guide contains practices for specifying and evaluating the electrical contact performance of crimped-type terminations with solid or stranded conductors. 1.2 This guide provides information relevant to the electrical contact performance of a crimped wire termination. It does not cover other aspects of selection and use of crimped terminals. 1.3 The methods discussed in this guide apply only to the wire termination, which is the electrical contact interface between the conductor(s) and the terminal. Other aspects important to terminal evaluation, such as the properties and performance of electrical insulation, the effectiveness of strain relief features, and the quality of contact between the terminal and other electrical circuit elements, are not included. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

ANSI/UL 486D-2010 密封导线连接器系统用安全标准

The following changes are being proposed: Relocation of Clause 1.4; Test requirements for wire connectors; Editorial revisions; Clarification for test sequence requirements in Clauses 8.2.1 - 8.8.1; Clarification of terminology; Editorial clarification of tests referenced in Clause 9.3.1.2; Revisions to marking, labeling and packaging; Revision to Table 1, Required test sequences; Revisions to figures; and Miscellaneous revisions to Annex B.

Standard for Safety for Sealed Wire Connector Systems (Proposals dated 6/26/09)

ASTM B942-10(2015) 压接电线电触头性能规格和质量保证的标准指南

4.1 The purpose of this guide is to provide end-product manufacturers and other users with technical information and methods recommended towards the achievement of successful application of crimped wire terminals. 4.2 For any given use, there is generally a choice of terminal types available, employing different mechanical design, materials, and installation tooling. Although terminals available to choose from may be similarly rated, typically according to wire sizes and combinations, their electrical contact performance in the end product may vary substantially. For many applications, the end-product reliability and user safety is substantially influenced by the choice of terminal and the quality of the completed termination. This guidance document contains specialized information on selection, assembly, and quality control of crimped wire terminals, covering aspects considered to be necessary to achieve reliable long-term operation in the intended application. This information is not generally found in commercial literature or textbooks. The methods discussed utilize connection resistance as the primary measure of termination quality, and change of connection resistance with time as the measure of termination deterioration. The methods are based on a foundation of modern electrical contact theory and practice. 1.1 This guide contains practices for specifying and evaluating the electrical contact performance of crimped-type terminations with solid or stranded conductors. 1.2 This guide provides information relevant to the electrical contact performance of a crimped wire termination. It does not cover other aspects of selection and use of crimped terminals. 1.3 The methods discussed in this guide apply only to the wire termination, which is the electrical contact interface between the conductor(s) and the terminal. Other aspects important to terminal evaluation, such as the properties and performance of electrical insulation, the effectiveness of strain relief features, and the quality of contact between the terminal and other electrical circuit elements, are not included. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

ANSI/EIA 364-1004:2010 验证独立电触点和电气连接器额定电流的TS-1004环境试验方法

Describes recommended test sequences for verifying the specified current rating of free-standing contacts or electrical connectors and sockets used in power applications.

TS-1004 Environmental Test Methodology for Verifying the Current Rating of Free-Standing Power Contacts or Electrical Connectors

ANSI/EIA 364-25D:2010 电连接器的探针损伤试验程序

Establishes a test method to be followed for probe damage testing;intended primarily for round socket contacts in electrical connectors and possibly applicable to other type contacts as well.

Probe Damage Test Procedure for Electrical Connectors

IEC 60320-2-4:2005+AMD1:2009 CSV 家用和类似用途的电器耦合器.第2-4部分:与电器重量有关的连接器

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

IEC 60320-2-4:2005/AMD1:2009 修改件1.家用和类似用途的器具耦合器.第2-4部分:根据器具重量接合的耦合器

Amendment 1 - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

TIS 1619-2009 射频连接器.第8部分:分规范.外导体内径为6.5mm(0.256in.)卡口式连接的射频同轴连接器.特征阻抗50Ω(BNC型)

Radio frequency connectors.part 8: sectional specific ation.rf coaxial connectors with inner diameter of outer conductor 6,5 mm(0,256in) with bayonet lock.characteristic impedance 50 (typebnc)