29.120.30 插头、插座、连接器 标准查询与下载

BS 1363-5:2016 13A插头、电源插座、适配器和连接装置.第5部分:装有保险丝的转换插头用规范

13 A plugs, socket-outlets, adaptors and connection units. Part 5: Specification for fused conversion plugs

MH/T 6009-2016 助航灯光电缆插头和插座

本标准规定了助航灯光电缆插头和插座(以下简称插头和插座)的术语和定义、分类、技术要求、试验方法、检验规则、包装、运输和储存。 本标准适用于助航灯光电缆、隔离变压器和助航灯具使用的插头和插座。

Plug and receptacle connectors for airport lighting cables

CSA C22.2 No.182.3-2016 特殊用途连接插头、插座和连接器

1.1 This Standard applies to plugs, receptacles, power inlets and outlets, connectors, and similar wiring devices intended for use in electronic and electrical applications in accordance with the Canadian Electrical Code, Part I. The types covered are as follows (see Figure 3): a) Type 0 rated up to 8.3 A and up to 30 V rms (42 V peak); b) Type 1A rated up to 8.3 A and from 30 V to 600 V ac or dc, or both; c) Type 1B rated from 8.3 A up to 200 A and up to 30 V rms (42 V peak); d) Type 2 rated from 8.3 A up to 31 A and from 30 V to 600 V ac or dc, or both; e) Type 3 rated from 31 A up to 200 A and from 30 V to 600 V ac or dc, or both; f) Type 4 rated from more than 200 A up to and including 1000 A, and up to 600 V ac or dc; and g) Type 5 rated less than 31 A and from over 600 V up to and including 6000 V ac or dc, or both. Note: As there is a great variety of applications for products covered by this Standard, their use should be evaluated with the design and construction of the end use application and cannot be solely judged by the requirements of this Standard.

Special use attachment plugs, receptacles, and connectors

DIN VDE V 0620-500-1:2016 家用和类似用途的插头和插座 第 500-1 部分：旅行适配器的特殊要求

Plugs and socket-outlets for household and similar purposes - Part 500-1: Particular requirements for travel adaptors

DIN EN 60320-1:2016 家用和类似一般用途的器具连接器.第1部分:一般要求(IEC 60320-1-2015+COR1-2016).德文版本EN 60320-1-2015+AC-2016

Appliance couplers for household and similar general purposes - Part 1: General requirements (IEC 60320-1:2015 + COR1:2016); German version EN 60320-1:2015 + AC:2016

DIN 89320:2016 带有防水插头和插座装置用防护触点的双极触点插入件. 直流10 A, 交流16 A, 250 V

Double-pole contact inserts with protective contact for watertight plug and socket devices - DC 10 A, AC 16, 250 V

CSA C22.2 No.298-2016(R2021) 高压耦合器

1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, and connectors and associated integrated accessories (i.e., junction box), rated up to 1,200 amperes (for single- and multi-pole) and above 750 V to 35 kV volts ac, 50/60 Hz and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole configuration. These devices are intended to provide portable power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code, Part I, using portable power cables with copper conductors, for use in either indoor or outdoor, nonhazardous locations. 1.2 The products covered in this Standard are commonly, but not exclusively, used in the following applications: a) open pit mining; b) underground mining; c) tunneling; d) shore to ship power; e) portable power equipment; f) general industrial use; and g) drilling. 1.3 This Standard does not apply to a) products covered in CSA C22.2 No. 182.1; b) products intended for use in hazardous (classified) locations; and c) devices intended to be separated or connected under load. 1.4 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

High voltage couplers

JIS C 8282-1 AMD 1:2016 家用和类似用途插头和插座.第1部分:一般要求(修改件1)

Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements (Amendment 1)

DIN VDE 0620-1:2016 家用和类似用途插头和插座连接.第1部分:固定插座的通用要求

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements on fixed socket-outlets

DIN VDE 0620-2-1:2016 家用和类似用途插头和固定插座.第2-1部分:插头和便携式插座通用要求

Plugs and socket-outlets for household and similar purposes - Part 2-1: General requirements on Plugs and portable socket-outlets

IEC 60320-1:2015/COR1:2016 家用和类似用途的器具耦合器 第1部分：一般要求；勘误表 1

Appliance couplers for household and similar general purposes - Part 1: General requirements; Corrigendum 1

GOST IEC 60884-2-7-2016 家用和类似用途电插头连接器. 第2-7部分. 软线延长集束的详细要求

Electric plugs connectors for household and similar purposes. Part 2-7. Particular requirements for cord extension sets

GOST IEC 60309-2-2016 工业用插头, 插座和耦合器. 第2部分. 销和导电管附件的尺寸兼容性要求

Plugs, socket-outlets and couplers for industrial purposes. Part 2. Dimensional interchangeability requirements for pin and contact-tube accessories

GOST IEC 60884-2-4-2016 家用和类似用途电插头连接器. 第2-4部分. 安全特低电压插头和插座的详细要求及试验方法

Electric plugs connectors for household and similar purposes. Part 2-4. Particular requirements for plugs and socket-outlets for SELV and methods of tests

GOST IEC 60884-2-1-2016 家用和类似用途插头和插座. 第2-1部分. 熔塞的详细要求

Plugs and socket-outlets for household and similar purposes. Part 2-1. Particular requirements for fused plugs

GOST IEC 60309-1-2016 工业用插头, 插座和耦合器. 第1部分. 通用要求

Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements

T/ZZB 031-2015 家用和类似用途插头插座

本标准规定了插头插座的定义、分类、基本要求、技术要求、检验规则、包装、运输和贮存要求及质量服务承诺。 本标准适用于户内或户外使用的、家用和类似用途的、仅用于交流电、额定电压在50V以上但不超过440V、额定电流不超过16A的、带或不带接地触头的单相插头、固定式或移动式插座。 本标准不包括暗装式安装盒的要求，只包括对插座进行试验所必需的明装式安装盒的要求。 注1：对安装盒的通用要求由 GB 17466 给出。 本标准也适用于装在电线组件中的插头和延长线插座。本标准还适用于作为电器的一部件的插头插座，

Plugs and socket-outlets for household and similar purposes

BS EN 60320-1:2015 家用和类似用途设备耦合器.一般要求

Appliance couplers for household and similar general purposes. General requirements

IEC TR 60083:2015 IEC成员国标准化的家用和类似通用插头和插座

Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC

JIS C 8302:2015 圆螺纹灯座

Edison screw lampholder adapters and branch sockets