29.120.40 开关 标准查询与下载

DB35/T 1618-2016 家用和类似用途智能开关通用技术规范

本标准规定了家用和类似用途智能开关（以下简称“智能开关”）的术语和定义、分类与型号、规 格参数、功能要求、技术要求、安全要求、性能要求、试验方法、检验规则、标志、包装、运输、储存。 本标准适用于交流100V～240V的智能家居、智能办公、智能酒店及其它智能电气系统控制照明、电动窗帘、调光、智能门锁等电子开关。

General technical specification for smart switches for household and similar purposes

JIS C 4526-2-1:2016 电器开关.第2-1部分:拉线开关的特殊要求

Switches for appliances -- Part 2-1: Particular requirements for cord switches

EN 61058-2-6:2016 器具开关 第 2-6 部分：用于电动手持工具 可移动工具以及草坪和园艺机械的开关的特殊要求

Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools@ transportable tools and lawn and garden machinery

BS EN 61058-1-2:2016 电器开关. 电子开关要求

Switches for appliances. Requirements for electronic switches

BS EN 61058-1-1:2016 电器开关 机械开关要求

Switches for appliances. Requirements for mechanical switches

GSO IEC 62626-1:2016 低压开关设备和控制设备封闭设备 第1部分：IEC 60947-3 范围之外的封闭式隔离开关 用于在维修和维护工作期间提供隔离

IEC 62626-1:2014 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V a.c. for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this standard are derived from switch-disconnectors according to IEC 60947-3. Enclosed switch-disconnectors in this standard are suitable for isolation according to IEC 60947 series and are not supposed to be equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not intended to be used for operational switching, quick start and stop or jogging.

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

EN 61058-1-1:2016 器具开关 第 1-1 部分：机械开关的要求

IEC 61058-1-1:2016 applies to mechanical switching devices and shall be used in conjunction with the requirements of IEC 61058-1.

Switches for appliances - Part 1-1: Requirements for mechanical switches

EN 61058-1-2:2016 器具开关 第 1-2 部分：电子开关的要求

Switches for appliances - Part 1-2: Requirements for electronic switches

EN 60669-2-5:2016 家用和类似用途固定电气装置的开关 第 2-5 部分：特殊要求 用于家庭和建筑电子系统（HBES）的开关和相关附件

Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)

T/ZZB 0048-2016 低压直流成套开关设备

本标准规定了低压直流成套开关设备(以下简称直流设备)的基本要求、通用要求、试验方法、检验规则、标志、包装、运输与贮存、服务承诺。 本标准适用于户内正常使用条件下直流额定电压不超过1500V的直流设备。

Low - voltage D.C switchgear

IEC 61058-1:2016 RLV 电器开关第1部分:一般要求

Switches for appliances - Part 1: General requirements

IEC 61058-1:2016 电器开关.第1部分:一般要求

"This part of IEC 61058 applies to switches for appliances. The switches are intended to control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. Switches for appliances are intended to be operated by ?C a person via an actuating member@ ?C indirect actuation@ ?C an actuating sensing unit. Transmission of a signal between the actuating member or sensing unit and the switch may be connected by optical@ acoustic@ thermal@ electrical or other relevant connection and may include remote controlled units. This part of IEC 61058 applies to switches for appliances provided with additional control functions governed by the switch provided with electronic circuits and devices that are necessary for the intended and/or correct operation of the switch. This part of IEC 61058 applies to circuitry when evaluated with a switch and necessary for the switching function. This part of IEC 61058 applies in general to switches for appliances in conjunction with the following parts: ?C Part 1-1: Requirements for mechanical switches@ and/or ?C Part 1-2: Requirements for electronic switches. This part of IEC 61058 does not apply to devices covered by: ?C IEC 60669 (all parts)@ Switches for household and similar fixed-electrical installations@ and ?C IEC 60730 (all parts)@ Automatic electrical controls. This part of IEC 61058 does not contain requirements for safety isolating switches (IEC 60050-811:1991@ 811-29-17). NOTE 1 For switches used in tropical climates@ additional requirements may be necessary. NOTE 2 Attention is drawn to the fact that the end product standards for appliances may contain additional or alternative requirements for switches. NOTE 3 Throughout this part of IEC 61058@ the word ""appliance"" means ""appliance or equipment""."

Switches for appliances - Part 1: General requirements

IEC 61058-2-6:2016 器具开关 第 2-6 部分：用于电动手持工具、移动工具和草坪和园艺机械的开关的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This standard is a subset based on IEC 61058-1. The clauses outlined below are intended to address the specific requirements for switches incorporated into or integrated with electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. This standard is intended for switches with an ambient temperature up to and including 55 °C. Switches tested to IEC 61058-1 are considered to comply with this standard and additional testing is not required provided ratings, loads, and endurance are correct. NOTE This Part 2-6 takes into account the fact that tests are conducted as part of the end product evaluation (e. g. products tested according to the IEC 60745 and IEC 62841 series, and lawn and gardening equipment tested according to the IEC 60335 series) and need not be conducted on the component switch.

Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery

IEC 61058-1-2:2016 电器开关 - 第1-2部分:电子开关的要求

"This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand@ by foot or by other human activity@ to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person@ via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately@ either physically or electrically@ from the switch and may involve transmission of a signal@ for example electrical@ optical@ acoustic or thermal@ between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore@ the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates@ additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard@ the word ""appliance"" means ""appliance or equipment"". NOTE 6 This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested@ this part is applicable together with the relevant Part 2 of IEC 61058. This part of IEC 61058 may@ however@ be applied for other types of switches which are not mentioned in a relevant Part 2 of IEC 61058@ provided that the electrical safety is not disregarded. This standard applies to switches intended to be incorporated in@ on or with an appliance. This standard also applies to switches incorporating electronic devices. This standard also applies to switches for appliances such as ?C switches intended to be connected to a flexible cable (cord switches) for which@ however@ particular requirements are given in IEC 61058-2-1; NOTE In this document@ the word ""cable"" means ""cable or cord"". ?C switches integrated in an appliance (integrated switches); ?C switches intended to be mounted separately from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1@ for which@ however@ particular requirements are given in IEC 61058-2-4; ?C change-over selectors for which@ however@ particular requirements are given in IEC 61058-2-5. This standard does not contain requirements for isolating switches. This standard does not apply to devices which control appliances and equipment not actuated intentionally by a person. These are covered by IEC 60730. This part of IEC 61058 applies to electronic switching devices and shall be used in conjunction with the general requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058."

Switches for appliances - Part 1-2: Requirements for electronic switches

ASTM F1662-16 检验薄膜开关或印刷电子设备的规定介质耐受电压和确定介质击穿电压的标准试验方法

4.1 Dielectric withstand voltage testing is useful for design verification, quality control of materials, and workmanship. 4.2 This test method is used to verify that the membrane switch or printed electronic device can operate safely at its rated voltage, and withstand momentary overpotentials due to switching, surges and other similar electrical phenomena. 4.3 Specific areas of testing are, but not limited to: 4.3.1 Conductor/dielectric/conductor crossing point, 4.3.2 Close proximity of conductors, and 4.3.3 Any other conductive surface such as shielding or metal backing panel. 4.4 Dielectric withstand voltage testing may be destructive and units that have been tested should be considered unreliable for future use. 4.5 Testing using ac voltage may be useful for switches intended for control circuits powered by ac voltages. 1.1 This test method covers the verification of a specified dielectric withstand voltage or dielectric breakdown voltage of a membrane switch or printed electronic device.

Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device

ASTM F2592-16 测量薄膜开关力位移的标准试验方法

3.1 The force and displacement values when converted to a slope are useful in quantifying the differences in tactile response among membrane switches. 3.2 Specified resistance is useful to manufacturers and users when designing membrane switch interface circuitry. 3.3 Actuation force and contact force are useful to manufacturers and users in determining the suitability, reference and aesthetics of a membrane switch in a given application. 3.4 The tendency of a switch to make or break electrical contact at unexpected moments during closure or release can be a sign of a poor design. The degree of teasing can range from a simple annoyance to a failure of critical control process. 3.5 The amount of switch sensitivity or teasing can also be a result of poor surface conductivity that will prevent an electrical event even when switch poles are in partial contact. 1.1 This test method covers the measurement of force displacement characteristics of a membrane switch. 1.1.1 This test method replaces Test Method F1570 (Tactile Ratio). Tactile Actuating Slope Angle and Tactile Recovery Slope Angle better represent the characterization of tactile sensation, previously called “Tactile Ratio” in Test Method F1570. 1.1.2 This test method replaces Test Method F1682 (Travel). 1.1.3 This test method replaces Test Method F1597 (Actuation and Contact Force). 1.1.4 This test method replaces Test Method F1997 (Switch Sensitivity). 1.2 Force displacement hysterisis loop curve can be used in the determination of Actuation Force, Displacement, Contact Force, Return Force, and Tactile Actuating Slope Angle and Tactile Recovery Slope Angle. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

ASTM F2750-16 用于确定弯曲膜开关或印刷电子设备的影响的标准测试方法

3.1 Bending of membrane switches, printed electronic device or their components can affect their visual appearance, mechanical integrity or electrical functionality. This test method simulates conditions that may be seen during manufacture, installation or use. 3.2 Bend testing may be destructive, therefore any samples tested should be considered unfit for future use. 3.3 Specific areas of testing include, but are not limited to: 3.3.1 Membrane switch flex tails or printed electronic device, and 3.3.2 Any component of a membrane switch or printed electronic device that may be subjected to bending. 1.1 This test method establishes a method for the bending of any part of a membrane switch or printed electronic device with conductive circuits. 1.1.1 The values given in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device

IEC 61058-1-1:2016 电器开关.第1-1部分:机械开关的要求

This clause of part 1 is applicable. Add the following at the end of Clause 1. This part of IEC 61058 applies to mechanical switching devices and shall be used in conjunction with the requirements of IEC 61058-1. NOTE Additional requirements for particular switches may be found in the relevant part 2 of IEC 61058.

Switches for appliances - Part 1-1: Requirements for mechanical switches

GSO IEC 60947-3:2016 低压开关设备和控制设备 第3部分：开关、隔离开关、隔离开关和熔断器组合装置

IEC 60947-3:2008+A1:2012+A2:2015 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. The manufacturer shall specify the type, ratings and characteristics according to the relevant standard of any incorporated fuses. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. The contents of the corrigenda of September 2012 and of November 2013 have been included in this copy. This consolidated version consists of the third edition (2008), its amendment 1 (2012) and its amendment 2 (2015). Therefore, no need to order amendments in addition to this publication. This publication is to be read in conjunction with IEC 60947-1:2011. Look inside

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

JB/T 12618-2016 家用和类似用途电器的触摸开关

本标准规定了家用和类似用途电器的触摸开关(以下简称开关)的安全、性能、试验方法和检验规则。 本标准适用于由人通过操动件操作，或者靠激发传感器(可在实体上或电气上与开关结合在一起，也可分开配置)操作的，装在家用或类似用途电气器具和其他设备中，借助人体动作或由人激发传感器去操动开关(或借助开关系统)接通和断开电器器具电源，额定电压不超过480 V、额定电流不大于30A的开关。由人通过操动件操作，或者靠激发传感器(可在实体上或电气上与开关结合在一起，也可分开配置)操作的开关也适用于本标准。 在特殊环境下使用的类似开关也可参照本标准。

Touch switches for household and similar electrical appliances