29.120.99 其他电工器件 标准查询与下载

IEC 61535:2023 用于固定装置中永久连接的安装耦合器

Installation couplers intended for permanent connection in fixed installations

IEC 61535:2023 RLV 用于固定装置中永久连接的安装耦合器

Installation couplers intended for permanent connection in fixed installations

T/SCAS 04-2023 5G基站电池控制器技术要求及检测规范

本文件规定了对5G基站电池控制器的设备规格类型、检测前准备、要求和检测方法等。

5G base station battery controller technical requirements and testing specifications

T/ZZB 2985-2022 智能坐便器 程序控制器

本文件规定了智能坐便器程序控制器的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于嵌入在一体式（含分体式）智能坐便器中的一种专用计算机，通过输入接口、输出接口和通讯接口获取被控对象工作状态、工作参数、命令执行结果以及环境数据等信息，执行其内部存储的控制程序，按照预定的控制算法和要求，输出控制信号或者命令，驱动执行结构，实现自动化或智能化控制目标（以下简称“控制器”）。 注： 智能坐便器程序控制器一般由微处理器、存储器、输入/输出接口、通信接口及控制功能模块，以及运行在这些硬件平台上的系统软件和应用软件组成。

Program controller of intelligent toilet

IEC 62275:2022 电缆管理系统.电气装置用电缆扎带

Cable management systems - Cable ties for electrical installations

IEC 62275:2022 CMV 电缆管理系统.电气装置用电缆扎带

Cable management systems - Cable ties for electrical installations

JB/T 13994-2022 防火电缆桥架

Fireproof cable tray

T/CASME 53-2022 高压开关设备用温湿度控制器

本文件规定了高压开关设备用温湿度控制器的额定值、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Temperature and humidity controller for high voltage switchgear

CSA C22.2 No.18.5-2022 定位装置

1 Scope 1.1 This standard specifies the requirements for devices intended for positioning, which may include bundling, routing, locating, and securing of cable, wire, conduit, or tubing used in a wiring system in electrical installations in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I, in Canada and the National Electrical Code (NEC), NFPA 70 in the United States of America. 1.2 These devices may be, but is not limited to, cable clamps, saddle clamp, cable and conduit clips, edge clips, mechanical mounts, screw mounts, push mounts, non-raceway wiring ducts., and devices including features such as magnets, adhesives etc. 1.3 These requirements do not apply to any mechanical protection or electrical insulation that is provided by these devices. 1.4 These requirements do not apply to hardware for the support of conduit, tubing, and cable from a building structure, such as hangers, staples, straps, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CE Code), Part I. Note: Hardware for the support of conduit, tubing, and cable from a building structure such as hangers, staples, straps, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CE Code), Part I are covered in the Standard for Hardware for the Support of Conduit, Tubing, and Cable, CSA C22.2 No. 18.4 or UL 2239. 1.5 These requirements do not apply to cable ties or cable tie accessories (See Note 1), coated electrical sleeving (See Note 2), extruded insulating tubing (See Note 3), mechanical protection tubing (See Note 4), metallic or nonmetallic raceways, woven flexible (fiber loom) sleeving or nonmetallic tubing employed as mechanical protection for insulated wires or equipment covered by other standards or requirements. Note 1: Cable ties and cable tie accessories are covered in the Standard for Cable Ties for Electrical Installations, CAN/CSA-C22.2 No. 62275 or UL 62275. Note 2: Coated electrical sleeving is covered in the Standard for Coated Electrical Sleeving, CAN/CSA-C22.2 No. 198.3 or UL 1441. Note 3: Extruded insulating tubing is covered in the Standard for Cable Ties for Extruded Insulating Tubing, CAN/CSA-C22.2 No. 198.1 or UL 224. Note 4: Mechanical Protective Tubing (MPT) is covered in the Standard for Mechanical Protection Tubing (MPT) and Fittings, CSA C22.2 No. 227.3 or UL 1696. 1.6 In Canada, the requirements in this standard generally address class of workmanship in accordance with the Canadian Electrical Code (CE Code), Part I, and where applicable, minor combustible components in the National Building Code of Canada.

Positioning devices

T/CASMES 60-2022 直流压缩机车载冰箱嵌入式智能控制器

本文件规定了直流压缩机车载冰箱嵌入式智能控制器（以下简称“控制器”）的术语和定义、基本要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于嵌入直流压缩机车载冰箱中，具有智能控制功能的一种控制器。

Embedded controller for vehicle refrigerator of direct current compressor

T/CEC 644-2022 电力物联网传感应用布局导则

本文件规定了电力生产各环节（包括发电、输电、变电、配电、用电等）中电力物联网传感器的应用范围、传感器种类、部署原则、部署要求。 本文件适用于电力生产各环节（包括发电、输电、变电、配电、用电等）的传感应用布局方案的设计与实施。

Layout Guidelines for Power IoT Sensing Applications

IEC 63044-5-1:2017+AMD1:2022 CSV 家用和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS）.第5-1部分:EMC要求、条件和试验装置

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

IEC 63044-5-3:2017/AMD1:2022 家用和建筑电子系统（HBES）以及建筑自动化和控制系统（BACS）.第5-3部分:工业环境中使用的HBES/BACS的EMC要求

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

IEC 63044-5-1:2017/AMD1:2022 修改件1.家用和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS）.第5-1部分:EMC要求、条件和试验装置

Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

IEC 63044-5-3:2017+AMD1:2022 CSV 家用和建筑电子系统（HBES）以及建筑自动化和控制系统（BACS）.第5-3部分:工业环境中使用的HBES/BACS的EMC要求

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

IEC 63044-5-2:2017+AMD1:2022 CSV 家用和建筑电子系统（HBES）及楼宇自动化和控制系统（BACS）.第5-2部分:用于住宅、商业和轻工业环境的HBES/BACS的EMC要求

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environme

IEC 63044-5-2:2017/AMD1:2022 家用和建筑电子系统（HBES）及楼宇自动化和控制系统（BACS）.第5-2部分:用于住宅、商业和轻工业环境的HBES/BACS的EMC要求

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environme

22/30455113 DC BS EN 60670-21 家用和类似固定电气装置用电气附件的盒子和外壳 第 21 部分：带有悬挂装置的盒子和外壳的特殊要求

BS EN 60670-21. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21. Particular requirements for boxes and enclosures with provision for suspension means

22/30455117 DC BS EN 60670-22 家用和类似固定电气装置的电气附件盒和外壳 第 22 部分：连接盒和外壳的特殊要求

BS EN 60670-22. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22. Particular requirements for connecting boxes and enclosures

IEC TR 63044-2:2022 家用和建筑电子系统（HBES）及建筑自动化和控制系统（BACS）.第2部分:环境条件

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 2: Environmental conditions