29.130 开关装置和控制器 标准查询与下载

DB42/T 398-2006 电能计量控制柜

Electric energy metering and control cubicle

DL/T 413-2006 额定电压35kV（Um=40.5 kV）及以下电力电缆热缩式附件技术条件

本标准规定了额定电压26/35kV及以下塑料绝缘和油纸绝缘电力电缆用热缩式电缆附件的产品标记及代号、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于额定电压U/U为26/35kV及以下塑料绝缘电力电缆热缩式终端、8.7/10kV及以下塑料绝缘电力电缆用热缩式接头和8.7/10kV及以下油纸绝缘电力电缆用热缩式终端。

Technical requirements of heat shrinkable accessories for power cable woth rated voltages up to 35kV（Um=40.5 kV）

CSA C22.2 No.254-2005(C2015) 电机控制中心

La présente norme nationale du Canada est commune avec NMX-J-353-ANCE et UL 845.

Motor Control Center

CSA C22.2 No.254-2005(R2015) 电机控制中心

1 Scope 1.1 Products covered 1.1.1 This standard applies to motor control centres to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part I, CSA C22.1, and the Mexican Electrical Installations (Utility), NOM-001-SEDE. 1.1.2 These requirements cover motor control centres for use on circuits having available short-circuit currents not more than 200 000 A rms symmetrical or 200 000 A dc. 1.1.3 This standard applies to single- and three-phase 50 and 60 Hz and dc motor control centres rated not more than 600 V ac or 1 000 V dc. 1.1.4 Requirements for fire pump controllers are as provided in Annex C, item 11. 1.2 Products not covered These requirements do not cover switchboards or panelboards intended for the control of electric light and power circuits, nor do they cover an individual unit for this purpose. Such units, however, that consist of manually or automatically operated switches, branch-circuit or service-circuit circuit-breakers, overcurrent-protective devices, or the like may be used within a motor control centre. 1.3 Equipment 1.3.1 A motor control centre can contain, but is not limited to, any combination of equipment such as the following: (a) full-voltage reversing or non-reversing combination motor control units; (b) full-voltage multispeed combination motor control units; (c) reduced-voltage part-winding, wye-delta or auto-transformer combination motor control units; (d) solid-state industrial controllers, such as adjustable-speed drives, programmable controllers, protective relays, and the like; (e) lighting or distribution panelboards; (f) feeder-tap units; (g) incoming-line equipment, such as main lugs, fusible switch, isolation switch, or circuit-breaker; (h) control or lighting transformers; (i) special equipment assemblies; (j) combination contactor units. 1.3.2 The foregoing equipment can contain, but is not limited to, such items as pushbuttons, selector switches, indicating lights, control transformers, control circuit fuses, and auxiliary devices incorporated as an integral part of the units. 1.4 Units of measurement The first values given are SI (metric) units. Alternate measurements shown in parentheses are US customary units, which sometimes are not strict conversions.

Motor Control Centres

KS C IEC 61800-5-1:2005 可调速电力传动系统.第5-1部分:安全要求.电、热和能量

이 규격에서는 속도 조절용 전력 변환 장치 또는 그것의 요소 및 전기, 열, 에너지 안전

Adjustable speed electrical power drive systems-Part 5-1:Safety requirements-Electrical, thermal and energy edition

KS C IEC 61800-5-1-2005(2020) 调速电力传动系统第5－1部分:安全要求电、热、能版

Adjustable speed electrical power drive systems－Part 5－1：Safety requirements－Electrical, thermal and energy edition

LST HD 639 S1-2003/A1-2004 电器配件 家用和类似用途的不带过流保护的便携式剩余电流装置（PRCD）

Electrical accessories. Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

LST HD 639 S1-2003/AC-2004 电器配件 家用和类似用途的不带过流保护的便携式剩余电流装置（PRCD）

Electrical accessories. Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

LST HD 639 S1-2003 电器配件 家用和类似用途的不带整体过流保护的便携式剩余电流设备（PRCD）（IEC 61540:1997+A1:1998，已修改）

Electrical accessories. Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (IEC 61540:1997+A1:1998, modified)

KS C IEC 61136-1-2002(2012) 半导体功率变换器调速电气传动系统一般要求第1部分:额定值规范 特别是直流电动机传动

Semiconductor power convertors－Adjustable speed eletcric drive systems－General requirements－Part 1 : Rating specifications, particularly for d.c. motor drives

IEC 61540:1997/AMD1:1998 电气配件 - 便携式剩余电流器件 无集成过流保护 适用于家用和类似用途（prcds）

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

JB/T 8635-1997 防腐密封型低压成套开关设备和控制设备

本标准规定了防腐密封型低压成套开关设备和控制设备的防腐类型、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于户内强腐蚀和中等腐蚀环境条件下使用和防腐设备。 本标准不适用于防爆、船用等其他特殊环境条件下使用的低压成套开关设备和控制设备。

Corrosion proof sealed low voltage complete set of switch gears and control units

JB/T 8634-1997 湿热带型装有电子器件的电控设备

　　本标准规定了湿热带型（代号为TH）装有电子器件的电控设备技术要求、试验方法、检验规则、标志、包装及贮存等，适用于在湿热带地区户内工作的带有电子器件的电控设备。

Humid tropics type electric control unit housing electronic components

CNS 6059-1983 低压断流器

本标准规定交流电压 250V 以下外内电路用之装配熔线及钨丝熔线等之断流器。

Low-Voltage Cut Outs

CNS 9091-1982 柜式高压受电设备用断流器

本标准适用于 CNS 9090 柜式高压受电设备用断流器（以下简称断流器）。

High Voltage Cut Out for Cubicle Type Power Receiving Unit