29.130.10 高压开关装置和控制器 标准查询与下载
共找到 858 条与 高压开关装置和控制器 相关的标准，共 58 页
This part of IEC 62271 specifies the service conditions@ rated characteristics@ general structural requirements and test methods of high voltage/low voltage or low voltage/high voltage prefabricated substations@ which are cable-connected@ to be operated from inside (walk-in type) or outside (non-walk-in type) for alternating current of rated voltages above 1 kV and up to and including 52 kV on the high voltage side@ and for one or more transformers for service frequencies up to and including 60 Hz for outdoor installation at locations with public accessibility and where protection of personnel is provided. Prefabricated substations can be situated at ground level or partially or completely below ground level. In general a prefabricated substation comprises an enclosure containing the following electrical components: - power transformers; - high voltage and low voltage switchgear and controlgear; - high voltage and low voltage interconnections; - auxiliary equipment and circuits. However@ relevant provisions of this standard are applicable to designs where not all these electrical components exist (for example@ an installation consisting of power transformer and low voltage switchgear). Non-prefabricated substations should comply with the applicable requirements of IEC 61936- 1:2010.
High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-03
- 实施
- 2014-04-04
High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-03
- 实施
High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters; Corrigendum 1
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-02
- 实施
High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2008 + A1:2013); German version EN 62271-109:2009 + A1:2013
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-02
- 实施
- 2014-02-01
Cette partie de la CEI 62271 s'applique aux sectionneurs de terre rapides à courant alternatif conçus pour les installations intérieures et extérieures et pour fonctionner à des fréquences utiles de 50 Hz et 60 Hz sur des réseaux de tensions supérieures ou égales à 550 kV.Les sectionneurs de terre rapides décrits dans la présente norme sont destinés à supprimer l'arc secondaire demeurant après l'élimination des défauts sur les lignes de transport par les disjoncteurs.
High-voltage switchgear and controlgear - Part 112 : alternating current high-speed earthing switches for secondary arc extinction on transmission lines
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-01-18
- 实施
- 2014-01-18
La présente partie de la CEI 62271 s'applique aux procédures de manipulation du SF6 lors de l'installation, de la mise en service, du fonctionnement normal ou anormal, et de l'élimination en fin de vie de l'appareillage à haute tension.Ces procédures sont considérées comme des exigences minimales pour garantir la sécurité du personnel travaillant avec du SF6 (voir Annexe B) et pour minimiser l'émission de SF6 vers l'environnement.Cette norme s'applique également de façon générale aux mélanges de gaz contenant du SF6.Les particularités de leur manipulation sont traitées en Annexe J.
High-voltage switchgear and controlgear - Part 4 : handling procedures for sulphur hexafluoride (SF6) and its mixtures
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2014-01-18
- 实施
- 2014-01-18
IEC 62271-204:2011 applies to rigid HV gas insulated transmission lines (GIL) in which the insulation is obtained, at least partly, by a non-corrosive insulating gas, other than air at atmospheric pressure, for alternating current of rated voltages above 52 kV, and for service frequencies up to and including 60 Hz. This standard cancels and replaces IEC/TS 61640:1998. It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update to be in line with IEC 62271-1:2007 and 62271-203 and alignment of the voltage ratings and the test voltages; - addition of new information for gas tightness and corrosion protection. This publication is to be read in conjunction with IEC 62271-1:2007.
High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
- ICS
- 29.130.10
- CCS
- 发布
- 2013-12-31
- 实施
IEC/TR 62271-305:2009(E) applies to high-voltage air-insulated disconnectors for rated voltages above 52 kV. The report describes the capacitive current switching duty and provides guidance on laboratory testing to demonstrate the switching capability. Air-insulated disconnectors equipped with auxiliary interrupting devices are included under this scope.
High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV
- ICS
- 29.130.10
- CCS
- 发布
- 2013-12-31
- 实施
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2001/A2:2013); German version EN 62271-102:2002/A2:2013
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-12
- 实施
- 2013-12-01
High-voltage switchgear and controlgear. Handling procedures for sulphur hexafluoride (SF6) and its mixtures
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-11-30
- 实施
- 2013-11-30
本标准规定了电力系统继电保护及安全自动装置柜(屏)的技术要求、试验方法、检验规则、标志、包装、运输及储存。本标准适川于电力系统中使ill的继电保护及安全自动装置柜(屏)(以下简称继电保护柜),作为继电保护柜设计、生产和质量检验的依据。
General specifications for cabinet (panel) with protection and security automatic equipment of power system
- ICS
- 29.130.10
- CCS
- K45
- 发布
- 2013-11-28
- 实施
- 2014-04-01
本标准适用于DL/T 402-2007范围内的高压交流断路器。在DL/T 402-2007的6.102-6.111规定的试验方式范围内,本标准给出了用合成方法试验高压交流断路器关合和开断能力的一般规则。本标准中描述的方法和技术是通用的。本标准的目的是确定合成试验的判据,以及对试验结果作出适当的评估。该判据将确定试验方法的有效性不会因试验回路的变更而改变。
Synthetic testing of high-voltage alternating current circuit-breakers
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-11-28
- 实施
- 2014-04-01
本标准规定了额定电压72.5kV及以上智能气体绝缘金属封闭开关设备(以下简称智能GIS)的相关术语，明确了智能GIS的技术原则、使用条件、设计与结构以及试验等方面的要求。本标准适用于额定电压72.5kV及以上气体绝缘金属封闭智能开关设备，智能GIS除满足GB 7674-2008外，还应满足本标准要求。其他相关开关设备，如紧凑型成套开关设备(HGIS)、SF断路器可参照本标准。
Intelligent gas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-11-28
- 实施
- 2014-04-01
IEC 62271-4:2013 applies to the procedures for handling of SF6 during installation, commissioning, normal and abnormal operations, disposal at the end of life of high voltage switchgear and controlgear. This first edition cancels and replaces the first edition of IEC/TR 62271-303 published in 2008. This first edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the description of the potential effects on health of SF6 by products (former Annex D of IEC/TR 62271-303:2008) has been replaced by the calculation methods for evaluating of the potential effects on health of SF6 by products (see Annex H); b) information about cryogenic reclaim of SF6. Have been added (see Annex I); c) handling procedures for the most popular SF6 mixtures have been added (see Annex J).
High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
- ICS
- 29.130.10
- CCS
- 发布
- 2013-11-01
- 实施
- 2013-12-31 (7)
High-voltage switchgear and controlgear. Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-10-31
- 实施
- 2013-10-31
IEC 62271-112:2013 applies to a.c. high-speed earthing switches designed for indoor and outdoor installation and for operation at service frequencies of 50 Hz and 60 Hz on systems having voltages of 550 kV and above. High-speed earthing switches described in this standard are intended to extinguish the secondary arc remaining after clearing faults on transmission lines by the circuit-breakers.
High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
- ICS
- 29.130.10
- CCS
- 发布
- 2013-10-04
- 实施
- 2013-12-10 (7)
High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV; Corrigendum 1
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-10
- 实施
This British Standard gives recommendations and guidance for the maintenance of electrical switchgear and controlgear having a rated a.c. or d.c. voltage above 36 kV. NOTE This standard is not applicable to explosion protected switchgear and controlgear. Inspection and maintenance of electrical apparatus in explosive gas atmospheres is covered in BS EN 60079-17.
Maintenance of electrical switchgear and controlgear for voltages above 36 kV. Code of practice
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-09-30
- 实施
- 2013-09-30
IEC 62271-109:2008 is applicable to a.c. series capacitor by-pass switches designed for outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 52 kV. It is only applicable to by-pass switches for use in t
High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches
- ICS
- 29.130.10
- CCS
- 发布
- 2013-08-30
- 实施
- 2013-08-30
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
- ICS
- 29.130.10
- CCS
- K43
- 发布
- 2013-08-10
- 实施
- 2013-08-10
