29.130.20 低压开关装置和控制器 标准查询与下载

DIN EN 60947-1 Berichtigung 1:2017 低压开关设备和控制设备. 第1部分: 通用规则(IEC 60947-1-2007 + A1-2010 + A2-2014); 德文版本EN 60947-1-2007 + A1-2011 + A2-2014, DIN EN 60947-1 (VDE 0660-100)-2015-09勘误表

Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2007 + A1:2010 + A2:2014); German version EN 60947-1:2007 + A1:2011 + A2:2014, Corrigendum to DIN EN 60947-1 (VDE 0660-100):2015-09

KS C IEC 60439-4-2016 低压开关设备和控制设备组件第4部分:建筑工地组件的特殊要求

Low-voltage switchgear and controlgear assemblies－Part 4：Particular requirements for assemblies for construction sites

KS C IEC 60439-4-2016(2021) 低压开关设备和控制设备组件第4部分:施工现场组件的特殊要求

Low-voltage switchgear and controlgear assemblies－Part 4：Particular requirements for assemblies for construction sites

KS C IEC 60439-4:2016 低压开关设备和控制设备组件 第4部分：施工现场总装的特殊要求

Low-voltage switchgear and controlgear assemblies－Part 4：Particular requirements for assemblies for construction sites

T/ZZB 0150-2016 多功能转换开关

本标准规定了多功能转换开关（以下简称：转换开关）的术语、定义、符号及代号、产品型式及特性、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于交流50 Hz或60 Hz、额定电压不超过400 V、直流电压不超过220 V，约定发热电流（Ith）不超过10 A的电路中，作电气控制线路（控制电磁线圈）转换用途的直接传动式开关以及直接起动主开关储能机构电动机的转换开关。

Multifunctional commutation switch

IEC 60947-2:2016/COR1:2016 低压开关设备和控制设备. 第2部分: 断路器. 勘误表1

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers - Corrigendum 1

JIS C 8201-7-1:2016 低压开关设备和控制设备.第7-1部分:辅助设备.铜导线用接线板

Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors

IEC 60947-2:2016 RLV 低压开关设备和控制设备.第2部分:断路器

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-2:2016 低压开关设备和控制设备.第2部分:断路器

This part of IEC 60947 series applies to circuit-breakers@ the main contacts of which are intended to be connected to circuits@ the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers. Circuit-breakers rated above 1 000 V a.c. but not exceeding 1 500 V a.c. may also be tested to this standard. It applies whatever the rated currents@ the method of construction or the proposed applications of the circuit-breakers may be. The requirements for circuit-breakers which are also intended to provide earth leakage protection are contained in Annex B. The additional requirements for circuit-breakers with electronic over-current protection are contained in Annex F. The additional requirements for circuit-breakers for IT systems are contained in Annex H. The requirements and test methods for electromagnetic compatibility of circuit-breakers are contained in Annex J. The requirements for circuit-breakers not fulfilling the requirements for over-current protection are contained in Annex L. The requirements for modular residual current devices (without integral current breaking device) are contained in Annex M. The requirements and test methods for electromagnetic compatibility of circuit-breaker auxiliaries are contained in Annex N. The requirements and test methods for d.c. circuit-breakers for use in photovoltaic (PV) applications are contained in Annex P. The requirements and test methods for circuit-breakers incorporating residual current protection with automatic reclosing functions are contained in Annex R. Supplementary requirements for circuit-breakers used as direct-on-line starters are given in IEC 60947-4-1@ applicable to low-voltage contactors and starters. The requirements for circuit-breakers for the protection of wiring installations in buildings and similar applications@ and designed for use by uninstructed persons@ are contained in IEC 60898. The requirements for circuit-breakers for equipment (for example electrical appliances) are contained in IEC 60934. For certain specific applications (for example traction@ rolling mills@ marine service) particular or additional requirements may be necessary. NOTE Circuit-breakers which are dealt with in this standard can be provided with devices for automatic opening under predetermined conditions other than those of over-current and undervoltage as@ for example@ reversal of power or current. This standard does not deal with the verification of operation under such pre-determined conditions. The object of this standard is to state: a) the characteristics of circuit-breakers; b) the conditions with which circuit-breakers shall comply with reference to: 1) operation and behaviour in normal service; 2) operation and behaviour in case of overload and operation and behaviour in case of short-circuit@ including co-ordination in service (selectivity and back-up protection); 3) dielectric properties; c) tests intended for confirming that these conditions have been met and the methods to be adopted for these tests; d) information to be marked on or given with the apparatus.

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-5-1:2016 RLV 低压开关设备和控制设备第5-1部分:控制电路装置和开关元件机电控制电路装置

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

GSO IEC 60947-2:2016 低压开关设备和控制设备 第2部分：断路器

IEC 60947-2:2006+A1:2009+A2:2013 applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers. The main changes introduced in this new edition are an amendment to the verification of dielectric properties, the improvement of EMC clauses in Annexes B, F, J and M, and the addition of a new Annex O regarding instantaneous trip circuit-breakers. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 4.1. The provisions of the general rules dealt with in IEC 60947-1 are applicable to this standard, where specifically called for. This consolidated version consists of the fourth edition (2006),its amendment 1 (2009) and its amendment 2 (2013). Therefore, no need to order amendment in addition to this publication.

Low-voltage switchgear and controlgear, Part 2: Circuit breakers.

DB44/T 1822-2016 低压限载断路器

本标准规定了低压限载断路器（以下简称断路器）的分类、特性、产品数据和资料、正常工作和安装条件、结构与性能要求、试验、包装、运输和储存。 本标准适用于主触头用来接入额定电压不超过交流50 Hz、1 000 V、额定工作电流不超过1 250 A 电路中的断路器。断路器应用于当负载电流超过限载电流而断开电路，保证电路及电气设备的安全运行以及分配电能、正常工作条件下电路不频繁接通与分断，并具有短路保护功能。 本标准附录A适用于带剩余电流保护的限载断路器。

Low voltage load limiting circuit breaker

DIN EN 61439-1 Bb.2:2016 低压开关设备和控制设备组合装置. 第1部分: 通用规则; 补充件2: 低压开关设备和控制设备总成通过计算的温升评估法 (IEC/TR 60890-2014)

Low-voltage switchgear and controlgear assemblies - Part 1: General rules; Supplement 2: A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation (IEC/TR 60890:2014)

DIN EN 61439-2 Bb.1:2016 低压开关设备和控制设备组合装置. 第2部分: 电源开关设备和控制设备组合装置; 补充件1: 因内部故障导致的起弧条件下进行试验指南 (IEC/TR 61641-2014)

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies; Supplement 1: Guide for testing under conditions of arcing due to internal fault (IEC/TR 61641:2014)

GOST IEC 60947-7-3-2016 低压开关设备和控制设备. 第7-3部分. 辅助设备. 熔断器接线端子的安全要求

Low-voltage switchgear and controlgear. Part 7- 3. Ancillary equipment. Safety requirements for fuse terminal blocks

GOST IEC 61915-2-2016 低压开关设备和控制设备. 网路工业设备的设备描述. 第2部分. 起动器和类似设备的根设备描述

Low-voltage switchgear and controlgear. Device profiles for networked Industrial devices. Part 2. Root device profiles for starters and similar equipment

SNI IEC 62208:2016 低压开关设备和控制设备组件的空白外壳 一般要求

Selengkup kosong untuk rakitan perangkat sakelar dan kendali (switchgear and controlgear) voltase rendah - Persyaratan umum

BS EN 62683:2015 低压开关设备和装置.信息交换用产品数据和性能

Low-voltage switchgear and controlgear. Product data and properties for information exchange

DIN EN 60947-5-5:2015 低压开关设备和控制设备.第5-5部分:控制电路器件和切换元件.具有机械锁扣功能的电气紧急故障中断器件(IEC 60947-5-5-1997+A1-2005);德文版本EN 60947-5-5-1997+A1-2005+A11-2013

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997 + A1:2005); German version EN 60947-5-5:1997 + A1:2005 + A11:2013

DIN EN 61439-5:2015 低压开关设备和控制组件.第5部分:公共网络配电组件(IEC 61439-5-2014+Cor.-2015);德文版本EN 61439-5-2015

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks (IEC 61439-5:2014 + Cor.:2015); German version EN 61439-5:2015