29.140.20 白炽灯 标准查询与下载

BS EN 60357+A2:2003 卤钨灯（非车辆用） 性能规范

Tungsten-halogen lamps (non-vehicle) - Performance specifications

BS EN 60357:2003+A3:2011 卤素灯系列(非车辆).性能规范

Tungsten halogen lamps (non-vehicle). Performance specifications

BS EN 60357:2003 卤钨灯(非车辆用).性能规范

This International Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · Photographic (including studio) · Floodlighting · Special purpose · General purpose · Stage lighting For some of the requirements given in this standard reference is made to "the relevant data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this standard relate only to type testing. NOTE The requirements and tolerances permitted by this standard correspond to testing of a type test sample, submitted by the manufacturer for that purpose. In principle this type test sample should consist of units having characteristics typical of the manufacturer's production and being as close to the production centre point values as possible. It may be expected with the tolerances given in the standard that products manufactured in accordance with the type test sample will comply with the standard for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see IEC 60410.

Tungsten halogen lamps (non-vehicle) - Performance specifications

BS EN 60357:2003+A11:2016 卤钨灯（非车用） 性能规格

What is BS EN 60357 – Tungsten halogen lamps about?   BS EN 60357 is an international standard that discusses the performance specifications of tungsten halogen lamps (non-vehicle). The tungsten filament of a halogen lamp has two purposes. One is to generate light, and the second is to generate the heat necessary to obtain a wall temperature exceeding 250˚C.   BS EN 60357 specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications:   Projection (including cinematograph and still projection)  

Tungsten halogen lamps (non-vehicle). Performance specifications

DS/EN 60630/A4:2003 白炽灯的最大灯外形

This Standard comprises maximum lamp outlines for incandescent lamps (including tungsten-halogen lamps).

Maximum lamp outlines for incandescent lamps

BS EN 60432-3:2003 白炽灯安全规范.卤钨灯(非车用)

This part of IEC 60432 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · Photographic (including studio) · Floodlighting · Special purpose · General purpose · Stage lighting This International Standard does not apply to general purpose single-capped tungsten halogen lamps, covered by IEC 60432-2, that are used as replacement for conventional tungsten filament lamps.

Incandescent lamps - Safety specifications - Tungsten-halogen lamps (non-vehicle)

BS EN 60432-3:2003+A2:2008 白炽灯.安全规范.(非车用)卤钨灯

This part of IEC 60432 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: ? Projection (including cinematograph and still projection) ? Photographic (including studio) ? Floodlighting ? Special purpose ? General purpose ? Stage lighting

Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle)

NF C72-101-3:2003 白炽灯.安全规范.第3部分:卤钨灯(非车用)

Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).

LST EN 60357-2003 卤钨灯（非车辆） 性能规格（IEC 60357:2002，已修改）

Tungsten halogen lamps (non vehicle). Performance specifications (IEC 60357:2002, modified)

LST EN 60064-2001/A2-2003 家用和类似用途的一般照明用钨丝灯 性能要求（IEC 60064:1993/A2:2002）

Tungsten filament lamps for domestic and similar general lighting purposes. Performace requirements (IEC 60064:1993/A2:2002)

NF C72-105*NF EN 60357:2003 钨丝卤素灯(非车辆用).性能规范

Tungsten halogen lamps (non-vehicle) - Performance specifications.

DS/EN 60064/A2:2003 家用和类似用途普通照明用钨丝灯 性能要求

This standard applies to tungsten filament incandescent lamps for general lighting services (GLS) which comply with the safety requirements in IEC 60432-1 and having: - rated wattage of 25 W to 200 W, inclusive; - rated voltage 100 V to 250 V, including marked voltage range not exceeding +- 2,5 % of the mean voltage; - bulbs of the A or PS shapes; - bulbs with clear, frosted or equivalently coated finishes, or white finishes; - caps B22d, E26 or E27. Specific lamp types are covered in section 8. This standard states the performance requirements for lamps, including test methods and means of confirming compliance with the requirements. Whole production appra

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

DS/EN 60357:2003 卤钨灯（非车辆）-性能规范

This standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: - Projection (including cinematograph and still projection); - Photographic (including studio); - Floodlighting; - Special purpose; - General purpose; - Stage lighting. For some of the requirements given in this standard reference is made to ""the relevant data sheet"". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The

Tungsten halogen lamps (non-vehicle) - Performance specifications

JIS C 7525:2003 白炽反光灯

この規格は，JIS C 7551-1の第1章安全要求事項に規定する一般照明用白熱電球の安全要求条件に適合し，かつ，次の条件を満たす反射形投光電球について規定する。

Reflector incandescent lamps

DLA MS25242 REV D VALID NOTICE 3-2003 螺丝接线端座PAR-64灯泡白炽灯

MS25242D remains inactive for new design, however, the document is valid for use.

LAMP, INCANDESCENT, PAR-64 BULB, SCREW TERMINAL BASE

ANSI C78.LL 4-2003 电灯.白炽灯样品制备和毒性特征浸出过程规程

This standard specifically covers common incandescent lamp types.

Electric Lamps - Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure

ANSI C78.20-2003 白炽灯.带E26中型螺纹灯座的A、G、PS和类似形状的白炽灯特性

ANSI C78.20- This standard sets forth physical and electrical characteristics of the group of incandescent lamps that have A, G, PS, and similar bulb shapes with E26 single and double contact medium screw bases including the reduced wattage versions. Onl

Incandescent Lamps - A, G, PS, and Similar Shapes with E26 Medium Screw Bases

ANSI C78.60432.1-2003 白炽灯.安全规范.第I部分:家用和类似一般照明用钨丝灯

This standard concerns Incandescent Lamps-Safety Specifications-Part I : Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes

Incandescent Lamps - Safety Specifications - Part I: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes

KS C IEC 60432-1:2002 白炽灯.安全规范.第1部分:家用和类似一般照明用钨丝灯

이 규격은 다음을 동시에 만족하는 일반 조명 기구 중 텅스텐 필라멘트 백열 전구의 안전

Incandescent lamps－Safety specifications－Part 1：Tungsten filament lamps for domestic and similar general lighting purposes

KS C IEC 60432-1-2002(2017) 白炽灯安全技术条件第1部分:家用和类似用途普通照明用钨丝灯

Incandescent lamps－Safety specifications－Part 1：Tungsten filament lamps for domestic and similar general lighting purposes