共找到 656 条与 白炽灯 相关的标准,共 44 页
Incandescent lamps-Safety specifications-Part 2:Tungsten halogen lamps for domestic and similar general lighting purposes
Incandescent lamps-Safety specifications-Part 2:Tungsten halogen lamps for domestic and similar general lighting purposes
이 규격은 일반 조명기 기용 텅스텐 할로겐 램프의 교환성 요구 사항과 안전성에 대해 규정한
Incandescent lamps-Safety specifications-Part 2:Tungsten halogen lamps for domestic and similar general lighting purposes
Maximum lamp outlines for incandescent lamps
This standard specifies battery-operated bicycle lighting (Categories C, D, E, F and G) with lamp cap PX13,5s according to DIN EN 60061-1, standard sheet 7004-35-2.#,,#
Bicycle incandescent lamps - Part 3: Categories C, D, E, F and G
Specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: Projection (including cinematograph and still projection) Photographic (including stu
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
This International Standard comprises maximum lamp outlines for incadescent lamps (including tungsten-halogen lamps). This consolidated version of IEC 60630 is based on the second edition (1994) and its amendments 1 (1997), 2 (1998), and 3 (1999). It bea
Maximum lamp outlines for incandescent lamps
This standard specifies bicycle incandescent lamps category TF5 with lamp cap BX8,4d-12,5 according to DIN EN 60061-1 (standard sheet under consideration).
Bicycle incandescent lamps - Part 5: Category TF5
Bicycle incandescent lamps - Part 4: Category HS4
Amendment 4 - Maximum lamp outlines for incandescent lamps
This standard specifies dimensions and characteristics of tungsten halogen lamps. The standard has been divided into sections according to the following lamp applications: PROJECTION PHOTOGRAPHIC (including studio) FLOODLIGHTING SPECIAL PURPOSE GENERAL P
Tungsten halogen lamps (non-vehicle) - Performance specifications
This International Standard applies to tungsten filament incandescent lamps for general lighting service (GLS) which comply with the safety requirements in IEC 432-1 and having: - rated wattage of 25 W to 200 W, inclusive; - rated voltage 100 V to 250 V, including marked voltage range not exceeding ±2,5 % of the mean voltage; - bulbs of the A or PS shapes; - bulbs with clear, frosted or equivalently coated finishes, or white finishes; - caps B22d, E26 or E27. Specific lamp types are covered in section 8. This standard states the performance requirements for lamps, including test methods and means of confirming compliance with the requirements. Whole production appraisal methods regarding a lamp manufacturer's test record on finished products are defined. This method can be applied for certification purposes. Details of a batch test procedure, which can be used to make an assessment of specific batches, are included, but it is not suitable for certification purposes. For some of the requirements given in this standard reference is made to "the relevant data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. NOTES 1 A lamp used in China having a rated wattage 15 W and rated voltage 220 V is included. 2 Separate references are made to E26/24 caps used in North America and E26/25 caps used in Japan. The two are not compatible. note: 1) In countries in the process of changing from 220 V to 230 V nominal supply voltage, a range of ±3,5 % will apply temporarily.
Tungsten filament lamps for domestic and similar general ligthing purposes - Performance requirements; Amendment 2
1.1 This standard covers portable flexible lighting products with a maximum input voltage rating of 120 volts to be used in acco~ance with the National Electrical Code,ANSI/NFPA 70 These products are provided with a power supply cord and are intended for outline and decorative lighting use Effective date for 1.1 changed from July 3, 2003 to November 1, 2003 1.2 These requirements cover lighting products incorporating non-replaceable series and series/parallel connected lamps enclosed within a flexible polymeric tube or extrusion Effective date br 1 2 changed from July 3 2003 to November 1 2003 1.3 These requirements also cover flexible lighting products used in light sculptures Effective date for 1 3 changed from July 3 2003 to November 1 2003 1.4 These requirements do not cover lighting products with replaceable lamps Effective date for 1 4 changed from July 3 2003 to November 1 2003 1.5 These requirements do not cover lighting products covered by UL 588,Seasonal and Holiday Decorative Products Effective date for 1 5 changed from July 3 2003 to November 1 2003
Flexible Lighting Products
MS28933, dated 7 DECEMBER 1962, has been reviewed and determined to be valid for use in acquisition.
LAMP, INCANDESCENT - T-20 BULB, MEDIUM BIPOST BASE
Miniature lamps (IEC 60983:1995)
Tungsten filament lamps for domestic and similar general lighting purposes. Performace requirements (IEC 60064:1993, modified)
This standard concerns the use of protective shields with Tungsten-Halogen Lamps.
Use of Protective Shields with Tungsten-Halogen Lamps - Cautionary Notice
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号