29.140.20 白炽灯 标准查询与下载

JIS C 7525:2009 白炽反光灯

This Standard specifies reflector incandescent lamps (hereafter referred to as "lamps")which comply with the requirements specified in JIS C7551-1 and also satisfy the following conditions

Reflector incandescent lamps

LST EN 60357-2003/AC-2009 卤钨灯（非车辆） 性能规格（IEC 60357:2002，已修改）

Tungsten halogen lamps (non vehicle). Performance specifications (IEC 60357:2002, modified)

DIN EN 60357:2009 卤钨灯(非车灯).性能规范

Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified + A1:2006, modified + A2:2008); German version EN 60357:2003 + Corrigendum:2003 + A1:2008 + A2:2008

IEC 60630:1994/AMD6:2009 白炽灯的最大外形尺寸.修改件6

Maximum lamp outlines for incandescent lamps; Amendment 6

DIN EN 60810:2009 道路车辆用灯 性能要求

Lamps for road vehicles - Performance requirements (IEC 60810:2003 + A1:2008); German version EN 60810:2003 + A1:2008

LST EN 60357-2003/A2-2009 卤钨灯（非车辆） 性能规范（IEC 60357:2002/A2:2008）

Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002/A2:2008)

JIS C 7528 AMD 1:2009 交通信号灯(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS C 7528:1996 is partially replaced with this Amend" ment.

Traffic signal lamps (Amendment 1)

JIS C 7508 AMD 1:2009 喷灯(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS C 7508:1996 is partially replaced with this Amend- ment.

Torch lamps (Amendment 1)

DS/EN 60357/A2:2009 卤钨灯（非车辆）-性能规范

This Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · · Photographic (including studio) · · Floodlighting · · Special purpose · · General purpose · · Stage lighting This third edition cancels and replaces the second edition published in 1982 and amendments 1(1984), 2(1985), 3(1987), 4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996), 11(1997), 12(1999) and 13(2000

Tungsten halogen lamps (non-vehicle) - Performance specifications

DIN EN 60432-3:2009 白炽灯.安全规范.第3部分:(非车用)钨卤灯

Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002 + A1:2005 + A2:2008); German version EN 60432-3:2003 + A1:2005 + A2:2008

SNI IEC 60432-1:2009 白炽灯. 安全规范. 第1部分：家用和类似一般照明用钨丝白炽灯

Incandescent lamps - Safety specifications. Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

SNI IEC/TR 60887:2009 电灯用玻璃灯泡的命名体系

Glass bulb designation system for lamps

ANSI/UL 2388-2009 柔性照明产品的安全性标准

Covers: (a) Revision to reduce the conductor cross-sectional area requirement in 14.2 for LED rope lights; and (b)Revising "seasonal product" to "flexible lighting product" in 40.8

Standard for Safety for Flexible Lighting Products

LST EN 60357-2003/A1-2008 卤钨灯（非车辆） 性能规范（IEC 60357:2002/A1:2006，已修改）

Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002/A1:2006, modified)

LST EN 60432-3-2003/A2-2008 白炽灯 安全规范 第3部分：卤钨灯（非车辆）（IEC 60432-3:2002/A2:2008）

Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002/A2:2008)

NF C72-101-3/A2:2008 白炽灯.安全规范.第3部分:(非车用)卤钨灯

Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).

IEC 60810:2008 道路车辆用灯.性能要求

This International Standard is applicable to replaceable lamps (filament lamps and discharge lamps) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are listed in IEC 60809. However, the standard may also be used for other lamps falling under the scope of this standard, as well as for future developments, e.g. such where the light is produced by light emitting diodes (LED). It specifies requirements and test methods for the measurement of performance charac- teristics such as lamp life, lumen maintenance, torsion strength, glass bulb strength and resistance to vibration and shock. Moreover, information on temperature limits, maximum lamp outlines and maximum tolerable voltage surges is given for the guidance of lighting and electrical equipment design. For some of the requirements given in this standard, reference is made to data given in tables. For lamps not listed in such tables, the relevant data are supplied by the lamp manufacturer or responsible vendor. The performance requirements are additional to the basic requirements specified in IEC 60809. They are, however, not intended to be used by authorities for legal type-approval purposes. NOTE In the various vocabularies and standards, different terms are used for "incandescent lamp" (IEV 845-07-04) and "discharge lamp" (IEV 845-07-17). In this standard, "filament lamp" and "discharge lamp" are used. However, where only "lamp" is written both types are meant, unless the context clearly shows that it applies to one type only.

Lamps for road vehicles - Performance requirements

IEC 60357:2002/AMD2:2008 (非车辆用)卤钨灯.性能规范

This amendment has been prepared by subcommittee 34A:Lamps, of IEC technical committee 34:Lamps and related equipment. Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http:llwebstore.iec.ch" in the data related to the specific publication. At this date, the publication will be ~ reconfirmed, ~ withdrawn, ~ replaced by a revised edition, or ~ amended.

Tungsten halogen lamps (non-vehicle) - Performance specifications

DIN EN 60357:2008 卤钨灯(非车用).性能规范(修改的IEC 60357-2002＋修改的A1:2006).德国版 EN 60357-2003＋技术勘误:2003＋A1:2008

Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified + A1:2006, modified); German version EN 60357:2003 + CENELEC-Cor.:2003 + A1:2008

DS/EN 60357/A1:2008 卤钨灯（非车辆）-性能规范

This Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · · Photographic (including studio) · · Floodlighting · · Special purpose · · General purpose · · Stage lighting This third edition cancels and replaces the second edition published in 1982 and amendments 1(1984), 2(1985), 3(1987), 4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996), 11(1997), 12(1999) and 13(2000

Tungsten halogen lamps (non-vehicle) - Performance specifications