29.140.30 荧光灯、放电灯 标准查询与下载

EN 60662:2012 钠蒸气高压灯

IEC 60662:2011 specifies performance requirements for high-pressure sodium vapour lamps for general lighting purposes which comply with the safety requirements of IEC 62035. This second edition cancels and replaces the first edition published in 1980 and its amendments. It constitues a technical revision. Main items that required development of the 2nd edition of IEC 60662 are: - restriction to performance requirements. Safety requirements are given in IEC 62035: Discharge lamps (excluding fluorescent lamps) - Safety specifications; - introduction of a test device for ignition; - split of the lamp data sheets which make use of the test device and those which do not; - provisions for measurement during starting, measurement of electrical and photometrical characteristics and tests for lumen maintenance and life; - general review e.g. of maximum lamp outlines and alignment of data; - new order of data sheets by wattage.

High-pressure sodium vapour lamps - Performance specifications

EN 62639:2012 荧光感应灯 性能规范

IEC 62639:2012 specifies the performance requirements for fluorescent induction lamps for general lighting purposes. In this standard, the term 'lamp' stands for 'induction lamp'. It may be expected that lamps which comply with this standard will start and operate satisfactorily at voltages between 92 % and 106 % of rated supply voltage and at an ambient air temperature between 10 °C and 50 °C, when operated with ballasts complying with IEC 60929 and IEC 61347-2-3, as far as applicable, and in a luminaire complying with IEC 60598-1.

Fluorescent induction lamps - Performance specification

DIN EN 61167:2012 金属卤素灯.性能规范

Metal halide lamps - Performance specification (IEC 61167:2011); German version EN 61167:2011

NF C72-222*NF EN 61199:2012 单头荧光灯.安全规范

Single-capped fluorescent lamps - Safety specifications.

DS/EN 60929/AC:2012 管状荧光灯用交流和/或直流供电的电子控制装置 性能要求

This international Standard specifies performance requirements for electronic control gear for use on a.c. and/or d.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation.NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included.NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for endproducts like luminaires and independent control gear. In a luminaire,

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

DS/EN 62554:2012 用于测量荧光灯中汞含量的样品制备

This International Standard specifies sample preparation methods for determining mercury levels in new tubular fluorescent lamps (including single capped, double capped, self-ballasted and CCFL for backlighting) containing 0,1 mg mercury or more. The intended resolution of the methods described in this standard is of the order of 5 %.Mercury level measurement of spent lamps is excluded, as during lamp operation, mercury gradually diffuses into the glass wall and reacts with the glass materials. The test method of this standard does not recover mercury that is diffused into or reacted with or otherwise incorporated irreversibly with the glass wall of dischar

Sample preparation for measurement of mercury level in fluorescent lamps

LST EN 62554-2012 用于测量荧光灯中汞含量的样品制备（IEC 62554:2011）

Sample preparation for measurement of mercury level in fluorescent lamps (IEC 62554:2011)

GOST 31948-2012 气体放电灯(荧光灯除外).安全性要求

Discharge lamps (excluding luminescent lamps). Safety requirements

GOST IEC 61195-2012 双管座的荧光灯.安全性规范

Double-capped fluorescent lamps. Safety specifications

GOST 31999-2012 一般照明用自镇流灯.安全性要求

Self-ballasted lamps for general lighting services. Safety requirements

DB35/T 1209-2011 大功率自镇流荧光灯

本标准规定了大功率自镇流荧光灯的术语和定义、分类与命名、技术要求、试验方法、产品检验规则及标志、包装、运输、贮存、使用说明。 本标准适用于额定电压220V、频率50Hz电源，标称功率为61W～300W，采用B22、E27、E40灯头的普通照明用大功率自镇流荧光灯（以下简称“灯”）。

High Power Self Ballasted Fluorescent Lamps

LST EN 61199-2011 单端荧光灯 安全规范（IEC 61199:2011）

Single-capped fluorescent lamps - Safety specifications (IEC 61199:2011)

DB44/T 974-2011 隧道照明用无极灯

本标准规定了隧道照明用无极荧光灯的术语和定义、型号、工作条件、主要参数、要求、试验方法、检验规则、标识、包装、运输及贮存。 本标准适用于在额定电压为220 V、额定频率50 Hz条件下工作，色温范围2 700 K -6 500 K.工作频率200 kHz- 3 000 kHz的隧道照明用无极灯灯具（以下简称“隧道无极灯”）。

Electrodeless lamps for tunnel lighting

JIS C 7803:2011 填充荧光灯的水银测定的实施方法

Practical method for the determination of mercury filled in fluorescent lamps

JIS C 7621:2011 高压钠蒸气灯.性能规范

High-pressure sodium vapour lamps -- Performance specification

JIS C 7623:2011 金属卤化物灯.性能规范

Metal halide lamps -- Performance specification

LST EN 60929-2011/AC-2011 用于管状荧光灯的交流和/或直流供电的电子控制装置 性能要求（IEC 60929:2011）

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011)

BS EN 62554:2011 荧光灯内水银含量测定用样品制备

Sample preparation for measurement of mercury level in fluorescent lamps

LST EN 61167-2011 金属卤化物灯 性能规范（IEC 61167:2011）

Metal halide lamps - Performance specification (IEC 61167:2011)

BS EN 60929:2011+A1:2016 用于管状荧光灯的交流和/或直流供电电子控制装置 性能要求

What is BS EN 60929 – Tubular fluorescent lamps about?   BS EN 60929 is an international standard that discusses the performance requirements for AC and/or DC supplied electronic control gear for tubular fluorescent lamps. A fluorescent lamp converts electrical energy into useful light much more efficiently than an incandescent lamp.   BS EN 60929 specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1 000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901 , and other fluorescent lamps for high-frequency operation.  

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps. Performance requirements