29.140.30 荧光灯、放电灯 标准查询与下载
共找到 929 条与 荧光灯、放电灯 相关的标准，共 62 页
Gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c. mains, also describes tests for the lamps with non-preheated cathodes operated without the use of a starter. Gives testing methods to be used for checking quality and interchangeability for type testing, for individual lamp batches or for a manufacturer's entire production. Consists of a series of standard data sheets, each giving the characteristics of a specific lamp type. Introduces new co-ordinates for the standard colours together with a new standard 'white' colour.
Double-capped fluorescent lamps - Performance specifications
- ICS
- 29.140.30
- CCS
- 发布
- 2010-05-28
- 实施
- 2010-05-28
Fluorescent lamps for general lighting service
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-05-20
- 实施
本标准规定了植物生长用放电灯（荧光灯除外）的术语和定义、分类与命名、要求、检验规则和标志、包装、运输、贮存。 本标准适用于根据植物生长所需光合作用与叶绿素吸收谱线而设计的、功率为50W～1000W透明玻壳、外启动的高光效高压钠灯，通过对灯光谱的调整，增加了蓝光部分，为植物的生长提供了所需的红波能量和蓝波能量的平衡。该产品适用于植物的育苗以及各类蔬菜和室内植物的栽培等。
Discharge lamps(excluding fluorescent lamps)for plant growth lighting
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了低气压汞蒸气放电彩色荧光灯的术语和定义、分类与命名、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于根据使用各类彩色荧光粉而设计的具有预热式阴极的灯、采用交流电源频率带启动器工作的及采用高频工作的预热阴极灯、采用高频(电源)工作的预热阴极灯。
Color double-capped fluorescent lamps
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了产品的型号、主要尺寸、基本参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于功率为50W～1500W透明玻壳的彩色单端和双端金属卤化物灯。符合本标准和GB 19652-2005的灯，当采用符合GB/T 18661-2008附录A要求的镇流器和触发器及附录B要求的灯具时，在额定电源电压的92%～106%范围内，可以正常启动和燃点。
Color Metal-halide lamps
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-04-22
- 实施
- 2010-10-01
本标准规定了普通照明用的发光二极管(LED)的分类、技术要求、试验方法、检定规则和标志、包装、运输、贮存。 本标准仅适用于单管白光LED，而不包括LED团簇或阵列，也不包括有机发光二极管(OLED）。非本标准范围内的产品如确有需要可参照使用。
LEDs for general lighting.Performance requirements
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-04-22
- 实施
- 2010-10-01
Specifies the performance requirements together with the test methods and conditions required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation (self-ballasted lamp
Self-ballasted lamps for general lighting services - Performance requirements
- ICS
- 29.140.30
- CCS
- K72
- 发布
- 2010-03-26
- 实施
Amendment 2 - Miscellaneous lamps
- ICS
- 29.140.30
- CCS
- 发布
- 2010-02-18
- 实施
This International Standard specifies the performance requirements for double-capped fluorescent lamps for general lighting service.The requirements of this standard relate only to type testing. Conditions of compliance@ including methods of statistical assessment@ are under consideration.The following lamp types and modes of operation are included:a) lamps having preheated cathodes@ designed for operation on a.c. mains frequencies with the use of a starter@ and additionally operating on high frequency;b) lamps having preheated high-resistance cathodes@ designed for operation on a.c. mains frequencies without the use of a starter (starterless)@ and additionally operating on high frequency;c) lamps having preheated low-resistance cathodes@ designed for operation on a.c. mains frequencies without the use of a starter (starterless)@ and additionally operating on high frequency;d) lamps having preheated cathodes@ designed for operation on high frequency;e) lamps having non-preheated cathodes@ designed for operation on a.c. mains frequencies;f) lamps having non-preheated cathodes@ designed for operation on high frequency.
Double-capped fluorescent lamps - Performance specifications; Amendment 4
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010-02
- 实施
- 2010-02-22
Self-ballasted lamps for general lighting services. Safety requirements
- ICS
- 29.140.30
- CCS
- 发布
- 2010
- 实施
- 2011-07-01
Self-ballasted lamps for general lighting services. Performance requirements
- ICS
- 29.140.30
- CCS
- 发布
- 2010
- 实施
- 2011-07-01
This troubleshooting guide is intended to help the service person quickly diagnose an HID luminaire with magnetic ballast and also assure that the problem is fixed on the first attempt. This guide addresses the four commonly encountered problems in two manners; 1) Summary of possible actions - for those needing only a check list; and 2) A detailed report on possible actions for those needing additional information.
Troubleshooting Guide for HID Luminaires
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010
- 实施
This standard sets forth the physical and electrical characteristics of the principal types of fluorescent lamps intended for application on conventional line frequency circuits, and electronic high frequency circuits.
Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2010
- 实施
Double-capped fluorescent lamps -- Part 2: Performance specifications
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2009-11-20
- 实施
Single-capped fluorescent lamps -- Part 2: Performance specifications
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2009-11-20
- 实施
本标准规定了61W～200W普通照明用分体式荧光灯的术语和定义、产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存和使用说明。 本标准适用于额定电压220V、频率50Hz交流电源，标称功率61W～200W，以镇流器与一只或几只相匹配的灯管，通过导线或接插件连接的普通照明用分体式荧光灯。
61W～200W split fluorescent lamps for general lighting and energy efficiency limit values and energy efficiency grades
- ICS
- 29.140.30
- CCS
- K 71
- 发布
- 2009-11-06
- 实施
- 2009-12-10
Single-capped fluorescent lamps - Safety specifications
- ICS
- 29.140.30
- CCS
- 发布
- 2009
- 实施
Self-ballasted lamps for general lighting services - Performance requirements
- ICS
- 29.140.30
- CCS
- 发布
- 2009
- 实施
