29.140.30 荧光灯、放电灯 标准查询与下载

SNI IEC 61199:2009 单头荧光灯. 安全规范

Single-capped fluorescent lamps - Safety specifications

ANSI/NEMA/ANSLG C78.42-2009 高压钠灯

High-Pressure Sodium Lamps

ANSI C78.391-2009 电灯.T1和T1-3/4型小型灯的特性

This standard sets forth the physical and electrical characteristics of those groups of subminiature incandescent lamps with T-1 and T-1 bulb shapes, including lamps of various base or termination configurations.

Electric Lamps - Characteristics of Subminiature Lamps of T1 and T1-3/4 Shapes

SNI IEC 60929:2009 管形荧光灯用交流电子镇流器. 性能要求

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

JIS C 8110:2008 放电灯用镇流器(不包括管形荧光灯)

This Standard specifies magnetic type ballasts for discharge lamps (hereafter referred to as "ballasts") for operating, the high-pressure mercury vapour lamps specified in JIS C 7604, low pressure sodium vapour lamps specified in JIS C 7610, high-pressure sodium vapour lamps specified in JIS C 7621 and metal halide lamps specified in JIS C 7623 (hereafter referred to as "lamps") which are to be used in ordinary places, in the circuit with the rated secondary voltage not more than 1 000 V, of the rated frequency 50 Hz or 60 Hz. This Standard is applicable to ballasts for operating lamps that are not specified in any of the above Japanese Industrial Standards. NOTE : The heat endurance of windings is described in Annex C and the protective functions, in Annex D.

Ballasts for discharge lamps (excluding tubular fluorescent lamps)

KS C IEC 60929:2008 管形荧光灯用交流电子镇流器.性能要求

이 표준은 교류 1 000 V 이하에서 사용되고 50 Hz 또는 60 Hz의 교류 입력 주

A.C supplied electronic ballasts for tubular fluorescent lamps－Performance requirements

KS C IEC 60921:2008 管形荧光灯镇流器.性能要求

이 표준은 KS C IEC 60081과 KS C IEC 60901에서 규정한 치수와 특성을

Ballasts for tubular fluorescent lamps－Performance requirements

KS C IEC 60927:2008 电灯附件.起动装置(点火器除外).性能要求

이 표준은 시동펄스 전압을 5 kV 이하로 발생하며, 50 Hz 또는 60 Hz 주파수,

Auxiliaries for lamps－Starting devices(other than glow starters)－Performance requirements

KS C IEC 60927-2008(2018) 灯具附件起动装置（辉光起动器除外）性能要求

Auxiliaries for lamps－Starting devices(other than glow starters)－Performance requirements

KS C IEC 60921-2008(2023) 管形荧光灯镇流器性能要求

Ballasts for tubular fluorescent lamps－Performance requirements

KS C IEC 61048-2008(2023) 灯用辅助设备.管状荧光灯和其他放电灯电路用电容器.一般和安全要求

Auxiliaries for lamps－Capacitors for use in tubular fluorescent and other discharge lamp circuits－General and safety requirements

KS C IEC 61048-2008(2018) 灯具附件管形荧光灯和其他放电灯电路用电容器一般要求和安全要求

Auxiliaries for lamps－Capacitors for use in tubular fluorescent and other discharge lamp circuits－General and safety requirements

KS C IEC 60921-2008(2018) 管状荧光灯镇流器性能要求

Ballasts for tubular fluorescent lamps－Performance requirements

KS C IEC 60923-2008(2018) 灯具附件放电灯镇流器（管形荧光灯除外）性能要求

Auxiliaries for lamps－Ballasts for discharge lamps(excluding tubular fluorescent lamps)－Performance requirements

KS C IEC 61048:2008 管状荧光灯和其他放电灯具电路中用的电容器.通用和安全要求

이 표준은 표고 3 000 m 이하, 50 Hz나 60 Hz에서 동작하는 방전램프 회로에

Auxiliaries for lamps－Capacitors for use in tubular fluorescent and other discharge lamp circuits－General and safety requirements

KS C IEC 60923-2008(2023) 灯具辅助设备放电灯用镇流器（不包括管状荧光灯）性能要求

Auxiliaries for lamps－Ballasts for discharge lamps(excluding tubular fluorescent lamps)－Performance requirements

JIS C 8117:2008 荧光灯用交流(AC)电子镇流器

This Standard specifies the a.c. supplied electronic ballasts for fluorescent lamps intended for use indoor or in luminaire, to light fluorescent lamps specified in JIS C 7601 [excluding compact type fluorescent lamps (integral with starter) in 4.2.1 c)] and the low pressure mercury germicidal discharge lamps specified in JIS C 7605 (here- after referred to as "lamps"), which have a rated input voltage not exceeding 300 V at 50 Hz, 60 Hz, or 50/60 Hz in common and a rated secondary voltage not exceeding 1 000 V and are used in general place (hereafter referred to as "ballasts"). However, the ballasts without enclosure and integrated with a luminaire are excluded. The ballasts integrated with a luminaire are as shown in 3.1.3 (integral lamp con- trol gear) of JIS C 8147-1.

AC supplied electronic ballasts for fluorescent lamps

JIS C 8120:2008 荧光灯用交流供电电子镇流器.性能要求

A.C.-supplied electronic ballasts for fluorescent lamps -- Performance requirements

LST EN 60901+A1+A2-2001/A4-2008 单端荧光灯 性能规范（IEC 60901:1996/A4:2007）

Single-capped fluorescent lamps - Performance specifications (IEC 60901:1996/A4:2007)

LST EN 60927-2008/AC-2008 灯用辅助设备 启动装置（辉光启动器除外） 性能要求（IEC 60927:2007）

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements (IEC 60927:2007)