29.140.30 荧光灯、放电灯 标准查询与下载

QB/T 2942-2008 氖灯

本标准规定了氖灯系列产品的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于氖灯系列产品。

Neon lamps

JIS C 7618-1:2008 单灯头荧光灯.第1部分:安全规范

この規格は，一般照明用片口金蛍光ランプの安全性を規定するもので，対象は，2G7, 2GX7, GR8, 2G10, G1Oq, GR1Oq, GX1Oq, GU1Oq, GX10q,GZ1Oq, GY1Oq, 2G11, G23, GX23, G24, GX24，及びGX32口金付ランプとする。。

Single-capped fluorescent lamps -- Part 1: Safety specifications

JIS C 7617-1:2008 双灯头荧光灯.第1部分:安全规范

この規格は，一般照明用直管蛍光ランプの安全性を規定するもので，対象は，Fa6, FaX6, Fa8, G5,G13, 2G13, R17d, RX17d及びW4.3 × 8.5d口金付ランプとする。

Double-capped fluorescent lamps -- Part 1: Safety specifications

NEMA ANSI/ANSLG C78.44-2008 双端引线的金属卤素灯

This standard serves as a consolidation and revision of three standards dealing with the 150-Watt M81 Double-Ended Metal-Halide Lamps (C78.1385), the 100-Watt, M91 Double-Ended Metal-Halide Lamps (C78.1386), and the 250-Watt, M80 Double-Ended Metal-Halide Lamps (C78.1387).

Double-Ended Metal-Halide Lamps

GOST R 53075-2008 金属卤化物灯.性能要求

Metal halide lamps. Performance requirements

GOST R 53074-2008 高压汞汽灯.性能要求

High-pressure mercury vapour lamps. Performance requirements

GOST R 53073-2008 高压钠蒸汽灯.性能要求

High-pressure sodium vapour lamps. Performance requirements

IEC 60901:1996/AMD4:2007 单端荧光灯.性能规范.修改件4

This standard is Single-capped fluorescent lamps - Performance specifications; Amendment 4.

Single-capped fluorescent lamps - Performance specifications; Amendment 4

KS C 7802-2007(2017) 荧光感应灯安全要求

Fluorescent induction lamps－Safety requirements

KS C 7802-2007(2022) 荧光感应灯－安全要求

Fluorescent induction lamps－Safety requirements

KS C 7802-2007 无极荧光灯.安全

이 규격은 일반 조명용 무전극 형광램프(이하 단순히 램프라 한다.)의 안전 요구사항을 명시

Fluorescent induction lamps-Safety requirements

QB/T 1116.2-2007 仪器灯泡.卤钨灯

本部分规定了仪器灯泡中仪器卤钨灯泡的术语和定义、型号、主要尺寸和基本参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于医疗器械和光学仪器上使用的仪器卤钨灯泡（以下简称“灯泡”）。

Instrument lamps.Tungsten halogen lamps

QB/T 1116.1-2007 仪器灯泡.白炽灯

本部分规定了仪器灯泡中白炽仪器灯泡的术语和定义、型号、主要尺寸和基本参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于工农业生产和科学研究等方面使用的仪器或仪表上配套的白炽仪器灯泡（以下简称“灯泡”）。

Instrument lamps.Incandescent lamps

GSO IEC 60969:2007 照明用自镇流灯 性能要求

Specifies the performance requirements together with the test methods and conditions required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation (self-ballasted lamps), intended for domestic and similar general lighting purposes. This consolidated version consists of the first edition (1998), its amendment 1 (1991) and its amendment 2 (2000). Therefore, no need to order amendments in addition to this publication.

Self-ballasted lamps for general lighting services - Performance requirements

SANS 1814:2007 白炽灯的直流供电照明器

Specifies requirements for luminaires for fluorescent lamps which are equipped with electronic ballasts for use on d.c. supplies of rated voltage not exceeding 250 V. The d.c. supply could be a solar energy system.

D.C. supplied luminaires for fluorescent lamps

SANS 60927:2007 灯附件．起动装置（辉光起动器除外）．性能要求

Specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, which produce starting pulses not greater than 5 kV.

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

LST EN 60155+A1-1999/A2-2007 荧光灯用辉光启动器（IEC 60155:1993/A2:2006）

Glow-starters for fluorescent lamps (IEC 60155:1993/A2:2006)

ANSI C78.380-2007 高亮度放电灯命名方法

This standard describes a system for the designation of high-intensity discharge lamps, including compact, enclosed-arc discharge light sources such as mercury, metal halide, high-pressure sodium, and similar types of lamps.

High-Intensity Discharge Lamps, Method of Designation

GSO IEC 60081:2007 双头荧光灯 性能标准

Gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c. mains, also describes tests for the lamps with non-preheated cathodes operated without the use of a starter. Gives testing methods to be used for checking quality and interchangeability for type testing, for individual lamp batches or for a manufacturer's entire production. Consists of a series of standard data sheets, each giving the characteristics of a specific lamp type. Introduces new co-ordinates for the standard colours together with a new standard 'white' colour.

Double-capped fluorescent lamps - Performance specifications

DB50/ 253-2007 LED装饰照明灯通用技术条件

本标准规定了LED装饰照明灯的定义、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于景观和类似场所作装饰照明用的以LED器件构成的发光单元、驱动电路及电源连接装置等集成为一体的LED装饰照明灯。该灯可用交流（50Hz或60Hz)或直流电源供电。本标准是LED装饰照明灯产品设计、制造、测试、验收、使用、质量检验和制订各种技术标准和技术文件的主要技术依据。

General technical requirements for LED decorative lighting