29.140.30 荧光灯、放电灯 标准查询与下载

CNS 14576-2007 紧密型荧光灯管(一般照明用)

本标准适用于交流电路一般照明用紧密型荧光灯管(以下简称灯管)。

Compact fluorescent lamps (for general lighting service)

CNS 14125-2007 安定器内藏式荧光灯泡(一般照明用)

本标准适用于额定频率为60 Hz、额定电压300V以下，以热阴极放电之荧光灯管为光源，且安定器与荧光灯泡为不可分离，灯帽型式为E型或B型之荧光灯泡(以下简称灯泡)。

Self-ballasted fluorescent lamps (for general lighting services)

DS/EN 60155/A2:2007 荧光灯用辉光启动器

Specifies interchangeable starters used with pre-heat type tubular fluorescent lamps and should be used in conjunction with corresponding publications for fluorescent lamps and their ballasts.

Glow-starters for fluorescent lamps

SANS 890-1:2007 日光灯镇流器．第1部分：带运行触发器的镇流器（A类灯）

Specifies requirements for ballasts, excluding resistance types, for fluorescent lamps for operation with starters.

Ballasts for fluorescent lamps Part 1: Ballasts for lamps for operation with starters (class A lamps)

SANS 1266:2007 放电灯用镇流器（管状荧光灯除外）

Specifies requirements for ballasts, including reference ballasts, for discharge lamps such as high-pressure mercury vapour lamps, low-pressure sodium vapour lamps, high-pressure sodium vapour lamps and metal-halide lamps.

Ballasts for discharge lamps (excluding tubular fluorescent lamps)

GSO IEC 60188:2007 高压汞蒸气灯 性能技术规范

This standard specifies the performance requirements for high-pressure mercury vapour lamps for general lighting purposes, with or without a red correcting fluorescent coating. For some of the requirements given in this standard, reference is made to "the relevant lamp data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements

High-pressure mercury vapour lamps - Performance specifications

GSO IEC 60155:2007 荧光灯启动器

Specifies interchangeable starters used with pre-heat type tubular fluorescent lamps and should be used in conjunction with corresponding publications for fluorescent lamps and their ballasts.

Glow-starters for fluorescent lamps

SANS 60923:2007 灯具配件.用于放电灯的镇流器(不包括管形荧光灯).性能要求

Covers performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps.It covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant lamp standards.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

CNS 15049-2007 高压钠气灯泡

本标准适用于室内外照明用高压钠气灯泡(以下简称灯泡)之型式试验。符合本标准之灯泡配合适用之安定器及起动器可在安定器额定电压的92%至106%范围内起动及正常点灯。

High-pressure sodium vapor lamps

CAN/CSA-C861-2006 镇流紧凑型荧光灯和镇流器适配器的性能

1 Domaine d'application 1.1 Cette norme prescrit les exigences relatives aux performances ainsi que les modes opératoires d'évaluation correspondants des lampes fluorescentes compactes (LFC) à ballast intégré et des adaptateurs à ballast qui sont destinés à l'éclairage général d'une puissance de 120 V, 60 Hz et convenant à des culots à vis E26 ou supérieurs. 1.2 Cette norme ne traite pas des LFC destinées à un usage spécial, comme les lampes produisant une lumière colorée. 1.3 Cette norme ne vise pas les luminaires utilisés avec les LFC. 1.4 Dans les normes CSA, le terme «doit» indique une exigence, c'est-à-dire une prescription que l'utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu'il est conseillé mais non obligatoire de faire et «peut» une possibilité ou un conseil. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes peuvent être normatives (obligatoires) ou informatives (facultatives).

Performance of Ballasted Compact Fluorescent Lamps and Ballast Adapters

GOST R 52713-2007 放电灯(不包括荧光灯).安全要求

Discharge lamps (excluding fluorescent lamps). Safety requirements

DS/EN 60923/A1:2006 灯用辅助设备 放电灯用镇流器（不包括管状荧光灯） 性能要求

This Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant IEC lamp standards.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

DS/EN 61048:2006 灯的辅助设备 用于管状荧光灯和其他放电灯电路的电容器 一般和安全要求

This Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kVAr, and not less than 0,1 ?F, having a rated voltage not exceeding 1 000 V, which are intended for use in discharge lamp circuits operating at 50 Hz or 60 Hz at altitudes up to 3 000 m.Note These lamps and associated ballasts are covered by IEC 60081, IEC 60901, IEC 60188, IEC 60192, IEC 60662, and IEC 61167 and by IEC 61347-2-8 and IEC 61347-2-9, respectively.It covers capacitors intended for connection in shunt or in series with the lamp circuit or an effective combination of these.It covers only impregnated or u

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

TIS 2233-2005 普通照明用自镇流LED灯

Self.ballasted lamps for general lighting services

TIS 2234-2005 普通照明用自镇流LED灯.安全要求

Self.ballasted lamps for general lighting services:safety requirements

SANS 890-2:2006 日光灯镇流器．第二部分：不带运行触发器的镇流器（B类灯）

Specifies requirements for ballasts for fluorescent lamps (hot cathode type only) for operation without starters (class B lamps), with insulation of at least class A, with the power factor corrected or uncorrected, for use on a.c. supply voltages of 110

Ballasts for fluorescent lamps Part 2: Ballasts for lamps for operation without starters (class B lamps)

LST EN 60923-2005/A1-2006 灯用辅助设备 放电灯镇流器（不包括管状荧光灯） 性能要求（IEC 60923:2005/A1:2006）

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements (IEC 60923:2005/A1:2006)

IEC 60155:1993/AMD2:2006 修改件2-荧光灯的辉光起动器

Amendment 2 - Glow-starters for fluorescent lamps

JIS C 7604:2006 高压汞蒸气灯.性能规范

この規格は，JIS C 8110に規定する安定器を用いて点灯する，赤色補正蛍光膜付き及び赤色補正蛍光膜なしの一般照明に用いる高圧水銀ランプ(以下,ランプという。)の性能について規定する。

High-pressure mercury vapour lamps -- Performance specifications

SANS 891:2006 日光灯用B类镇流器参考

Specifies the essential design features and operating characteristics of reference ballasts for class B fluorescent lamps for use on a.c. supplies at a frequency of 50 Hz.

Reference ballasts for class B fluorescent lamps