29.140.30 荧光灯、放电灯 标准查询与下载

JIS C 8117 AMD 1:2006 荧光灯用交流电子镇流器（修改件1）

この追補は，工業標準化法に基づき，日本工業標準調査会の審議を経て，経済産業大臣が改正したもので，これによって，JAS C 8117:1992は改正され，一部が置き換えられた。

AC supplied electronic ballasts for fluorescent lamps (Amendment 1)

IEC 61048:2006 用于灯管的辅助设备 - 用于管状荧光灯和其他放电灯电路的电容器 - 一般和安全要求

This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kVAr, and not less than 0,1 µF, having a rated voltage not exceeding 1 000 V, which are intended for use in discharge lamp circuits operating at 50 Hz or 60 Hz and at altitudes up to 3 000 m. NOTE These lamps and associated ballasts are covered by IEC 60081, IEC 60901, IEC 60188, IEC 60192, IEC 60662, and IEC 61167 and by IEC 61347-2-8 and IEC 61347-2-9, respectively. It covers capacitors intended for connection in shunt or in series with the lamp circuit or an effective combination of these. It covers only impregnated or unimpregnated capacitors, having a dielectric of paper, plastic film or a combination of both, either metallized or with metal foil electrodes. This standard does not cover radio-interference suppressor capacitors the requirements for which are found in IEC 60384-14. Tests given in this standard are type tests. Requirements for testing individual capacitors during production are not included.

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

SANS 60968:2006 普通照明设备用的自镇流灯．安全要求

Specifies the safety and interchangeability requirements, together with the test methods and conditions, required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation

Self-ballasted lamps for general lighting services - Safety requirements

DS/EN 60923:2006 灯用辅助设备 放电灯用镇流器（不包括管状荧光灯） 性能要求

This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant IEC lamp standards.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

DS/EN 60081/A3:2006 双端荧光灯 性能规范

This standard gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c. mains, also describes tests for the lamps with non-preheated cathodes operated without the use of a starter. Gives testing methods to be used for checking quality and interchangeability for type testing, for individual lamp batches or for a manufacturer's entire production.

Double-capped fluorescent lamps - Performance specifications

BS EN 60923:2005 电灯辅助设备.放电灯(管形荧光灯除外)镇流器.性能要求

This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant IEC lamp standards.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

NF C72-210/A3*NF EN 60081/A3:2006 双头荧光灯.性能规范

Double-capped fluorescent lamps - Performance specifications.

LST EN 60923-2006 灯的辅助材料 放电灯镇流器（不包括管状荧光灯） 性能要求（IEC 60923:2005）

Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements (IEC 60923:2005)

LST EN 60081-1999/A3-2006 双端荧光灯 性能规格（IEC 60081:1997/A3:2005）

Double-capped fluorescent lamps. Performance specifications (IEC 60081:1997/A3:2005)

KS C IEC 60634-2005(2010) 对灯具进行加热试验的热试验源（H.T.S.）灯

Heat test source(H.T.S.) lamps for carrying outheating tests on luminaires

KS C IEC 60434-2005(2010) 飞机电灯

Aircraft electrical filament lamps

KS A 3324-2005 放电灯的色度域

CHROMATICITY DOMAIN OF DISCHARGE LAMPS

QB/T 2055-2005 装饰灯泡

本标准规定了符合GB 14196.1中用于街道、门楼、商店、橱窗、舞厅及建筑物内外使用的供电电压为220V装饰钨丝灯泡，其类型包括： —额定功率：15W～60W； —额定电压：220V和230V； —P,B,G,M玻壳； —B22d,E27,E14灯头。 本标准规定了灯的性能要求、测试方法、合格判定方法以及与制造商成品测试记录相关的对全部产品的评定方法。该评定方法可用于认证。本标准对批次产品的测试程序也作了详细的介绍，该程序适用于对特定批次的评定但不能用于认证。

Decorative filament lamp

IEC 60081:1997/AMD3:2005 双端荧光灯.性能规范.修改件3

This is Amendment 1 to IEC 60081-2005 (Double-capped fluorescent lamps -Performance specifications)

Double-capped fluorescent lamps - Performance specifications; Amendment 3

DIN EN 50107-2:2005 无荷载额定输出电压大于1kV小于等于10kV的信号和发光放电管装置.第2部分:接地漏电和开路保护装置要求

Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices; German version EN 50107-2:2005

KS C 8104-2005 高压水银灯镇流器

이 규격은 KS C 7604, KS C IEC 60188 및 KS C IEC 62035에서

Ballasts for high pressure mercury vapour lamps

LST EN 50107-2-2005 空载额定输出电压超过 1 kV 但不超过 10 kV 的标志和发光放电管装置 第2部分：漏电和开路保护装置的要求

Signs and luminous discharge tube installations operating from a no load rated output voltage exceeding 1 kV but not exceeding 10 kV. Part 2: Requirements for earth leakage and open circuit protective devices

JIS C 8020:2005 荧光照明设备能效指数的计算方法

この規格は，蛍光灯器具のエネルギー消費効率指数の算出方法について規定する。

Method of calculation on Fluorescent luminaire efficacy index

BS EN 50107-2:2005 无荷载额定输出电压大于1 kV小于10 kV的标志和发光放电管装置.接地漏电和开路防护装置要求

This European Standard specifies requirements for earth-leakage and open-circuit protective devices designed to protect circuits for neon tubes operating from transformers conforming to EN 61050 at voltages exceeding 1 000 V but not exceeding 10 000 V. NOTE 1 Requirements for the installation of earth-leakage and open-circuit protective devices are given in EN 50107-1. NOTE 2 Requirements for earth-leakage and open-circuit protective devices used with inverters and converters are specified in EN 61347-2-10.

Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. Requirements for earth-leakage and open-circuit protective devices

IEC 61549:2003+AMD1:2005 CSV 杂类灯

Miscellaneous lamps