29.140.30 荧光灯、放电灯 标准查询与下载

KS C IEC 62035-2002(2022) 放电灯（不包括荧光灯）－安全规范

Discharge lamps(excluding fluorescent lamps)－Safety specifications

JIS C 7622:2002 荧光灯用辉光启动器.性能规范

この規格は，予熱形蛍光ランプ用の互換性をもつグロースタータ(以下,スタータという。)の性能について規定する。

Glow-Starters for fluorescent lamps -- Performance specification

BS EN 50107-1:2002 用无荷载额定值的输出电压大于1kV小于10kV的电源工作的标志灯和发光放电管装置.一般要求

This European Standard specifies the requirements and method of installation for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V, including the electrical components and wiring. The standard covers installations used for publicity, decorative or general lighting purposes, either for external or internal use. Such signs or luminous-discharge-tube installations may be either fixed or portable supplied from a low-voltage (LV) or extra-low-voltage (ELV) source by means of a transformer, inverter or converter.

Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - General requirements

DS/EN 60081/A1:2002 双端荧光灯 性能规范

This Standard specifies the performance requirements for double-capped fluorescent lamps for general lighting service. The requirements of this standard relate only to type testing. Conditions of compliance, including methods of statistical assessment, are under consideration.

Double-capped fluorescent lamps - Performance specifications

LST EN 60192-2002 低压钠蒸气灯 性能规格（IEC 60192:2001）

Low pressure sodium vapour lamps. Performance specifications (IEC 60192:2001)

CAN/CSA-E730-2-3 AMD 2-2002 修正案 2 家用和类似用途的自动电气控制装置 第 2-3 部分：管状荧光灯镇流器热保护器的特殊要求

Amendment 2 Automatic electrical controls for household and similar use – Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

LST EN 60188-2002 高压汞蒸气灯 性能规格（IEC 60188:2001）

High pressure mercury vapour lamps. Performance specifications (IEC 60188:2001)

KS C 8013-2002 管形荧光灯用交流电子镇流器

이 규격은 입력 주파수 60 Hz, 교류 입력 1 000 V 이하에서 사용되고 KS C 7

A.C supplied electronic ballasts for discharge lamps

SANS 60192:2001 低压钠气灯．性能规范

Specifies the performance requirements for low-pressure sodium vapour lamps for general lighting purposes.

Low-pressure sodium vapour lamps - Performance specifications

IEC 60081:1997+AMD1:2000 CSV 双头荧光灯.性能规范

Double-capped fluorescent lamps - Performance specifications

IEC 60081:2002 双头荧光灯.性能规范

Gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c. mains, also describes tests for the lamps with non-preheated cathodes operated without the use o

Double-capped fluorescent lamps - Performance specifications

DIN EN 60188:2002 高压汞蒸气灯.性能规范

The document specifies the performance requirements for high-pressure mercury vapour lamps for general lighting purposes, with or without a red correcting fluorescent coating.#,,#

High-pressure mercury vapour lamps - Performance specifications (IEC 60188:2001); German version EN 60188:2001

DIN EN 60192:2002 低压钠蒸气灯.性能规范

The document specifies the performance requirements for low-pressure sodium vapour lamps for general lighting purposes.

Low-pressure sodium vapour lamps - Performance specifications (IEC 60192:2001); German version EN 60192:2001

LST EN 62035-2001 放电灯（不包括荧光灯） 安全规范（IEC 62035:1999，已修改）

Discharge lamps (excluding fluorescent lamps). Safety specifications (IEC 62035:1999, modified)

UL 2161 BULLETINS-2002

1.1 This standard applies to transformers and power supplies, including those intended to be connected to a Class 2 source of supply, that provide the voltage and ballasting for neon and cold-cathode tubing (electric-discharge tubing) consisting of electrodes and gas such as neon, mercury, helium, argon, and similar gases, enclosed in glass. Neon transformers and power supplies for use in signs and outline lighting are intended to be used in accordance with Article 600 of the National Electrical Code, NFPA 70. Cold-cathode supplies identified for use only in cold-cathode lighting systems are intended to be used in accordance with Article 410 of the National Electrical Code.1.2 Neon transformers and power supplies covered by this standard are designated by their construction and intended use as specified in Table 1.1.1.2.1 The following neon supplies are only covered as components for use in an end product that is determined to comply with the Standard for Electric Signs, UL 48:a) Type 1 neon supplies;b) Types 5 and 6 neon supplies when complying with Exception No. 3 to 20.1;c) Types 6, 7, and 8 neon supplies when complying with the Exception to 11.4.1 or the Exception to 11.4.3;d) All types of neon supplies having an isolated output when complying with Exception No. 2 to 20.1; and e) Cold-cathode supplies when complying with Exception No. 5 to 20.1.1.3 These requirements do not cover transformers or power supplies intended to supply other forms of electric-discharge lighting sources such as fluorescent and high-intensity-discharge lighting. Requirements for fluorescent supply sources are covered in the Standard for Fluorescent-Lamp Ballasts, UL 935, and the requirements for high-intensity-discharge lighting supply sources are covered in the Standard for High-Intensity-Discharge Lamp Ballasts, UL 1029.1.4 These requirements do not cover transformers or power supplies that are intended for use with oil burners. The requirements for oil ignition transformers are covered in the Standard for Specialty Transformers, UL 506, and for oil ignition power supplies are covered in the Standard for Power Units Other Than Class 2, UL 1012.

3/07/2002(6p)

ANSI C82.13-2002 荧光灯和镇流器定义

This standard provides definitions of terms used in ANSI C78 and C82 series standards for fluorescent lamps and ballasts.

Definitions for Fluorescent Lamps and Ballasts

BS EN 60188:2001 高压汞蒸气灯.性能规范

High-pressure mercury vapour lamps - Performance specifications

IEC 60901:1996+AMD1:1997+AMD2:2000 CSV 单端荧光灯.性能规范

Single-capped fluorescent lamps - Performance specifications

SANS 60925:2001 用于直流供电的管形荧光灯用电子镇流器．性能技术要求

Specifies general performance requirements for electronic ballasts for use on d.c. supplies having rated voltages not exceeding 250 V, associated with tubular fluorescent lamps.

DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

SANS 60188:2001 高压汞灯．性能规范

Specifies the performance requirements for high-pressure mercury vapour lamps for general lighting purposes, with or without a red correcting fluorescent coating.

High-pressure mercury vapour lamps - Performance specifications