29.140.30 荧光灯、放电灯 标准查询与下载
共找到 929 条与 荧光灯、放电灯 相关的标准，共 62 页
Double-capped fluorescent lamps. Performance specifications
- ICS
- 29.140.30
- CCS
- 发布
- 2018-07-31
- 实施
- 2018-07-31
This document specifies the performance requirements for metal halide lamps for general lighting purposes. For some of the requirements given in this document@ reference is made to ??the relevant lamp data sheet??. For some lamps@ these data sheets are contained in this document. For other lamps@ falling under the scope of this document@ the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this document relate only to type testing. The requirements and tolerances specified in this document correspond to testing of a type test sample submitted by the manufacturer for that purpose. In principle this type test sample consists of units having characteristics typical of the manufacturer??s production and being as close to the production centre point values as possible. It can be expected that with the tolerances given in this document@ the product manufactured in accordance with the type test sample will comply with this document for the majority of production. Due to the production spread however@ it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes@ see ISO 2859-10.
Metal halide lamps - Performance specification
- ICS
- 29.140.30
- CCS
- 发布
- 2018-04-27
- 实施
- 2018-10-30
1 Scope This International Standard specifies the safety requirements for fluorescent induction lamps for general lighting purposes. It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure, which can be used to make limited assessment of batches, are also given in this standard. The schematic drawings of the systems are shown in Annex A. NOTE Self-ballasted induction lamps (where the discharge vessel, the power coupler and the control gear are integrated in the same product) are excluded from the scope of this standard. This standard covers photobiological safety according to IEC 62471 and IEC TR 62471-2. Blue light and infrared hazards are below the level which requires marking.
Fluorescent induction lamps. Safety specifications
- ICS
- 29.140.30
- CCS
- 发布
- 2018-03-31
- 实施
- 2018-03-31
1 Scope This International Standard specifies sample preparation methods for determining mercury levels in new tubular fluorescent lamps (including single capped, double capped, self-ballasted and CCFL for backlighting) containing 0,1 mg mercury or more. The intended resolution of the methods described in this standard is of the order of 5 %. Mercury level measurement of spent lamps is excluded, as during lamp operation, mercury gradually diffuses into the glass wall and reacts with the glass materials. The test method of this standard does not recover mercury that is diffused into or reacted with or otherwise incorporated irreversibly with the glass wall of discharge tubes. This standard does not contain information on measurement. Measurement is specified in IEC 62321.
Sample preparation for measurement of mercury level in fluorescent lamps
- ICS
- 29.140.30
- CCS
- 发布
- 2018-03-31
- 实施
- 2018-03-31
本标准规定了镝灯的分类和命名、主要尺寸、基本参数、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于功率为3 500 W及以下、带透明玻壳的镝灯(以下简称为“灯”)。 灯根据不同规格由220 V或380 V、频率为50 Hz的交流电网供电，使用符合附录A要求的基准镇流器和触发器在额定电源电压的92%~106%范围内时，能正常启动和燃点。
Dysprosium lamp
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Sample preparation for measurement of mercury level in fluorescent lamps
- ICS
- 29.140.30
- CCS
- 发布
- 2017-10-18
- 实施
Sample preparation for measurement of mercury level in fluorescent lamps
- ICS
- 29.140.30
- CCS
- 发布
- 2017-10-18
- 实施
本标准规定了术语与定义、安全要求和评定等。
Single-capped fluorescent lamps—Safety specifications
- ICS
- 29.140.30
- CCS
- C387
- 发布
- 2017-10-16
- 实施
- 2017-10-16
本标准规定了术语和定义、一般要求、一般试验要求、标志、互换性、质量和弯矩、防触电保护、绝缘电阻、电气强度、机械强度、灯头温升、耐热性、防火与防、故障状态、 爬电距离和电气间隙、灯的寿终试验、光生物安全、非正常工作、调光灯和三档位灯的试验条件、全部产品评估、型式试验的核查和灯具设计信息等。
Self-ballasted fluorescent lamps for general lighting services—Safety requirements
- ICS
- 29.140.30
- CCS
- C387
- 发布
- 2017-10-16
- 实施
- 2017-10-16
This International Standard specifies sample preparation methods for determining mercury levels in new tubular fluorescent lamps (including single capped, double capped, self-ballasted and CCFL for backlighting) containing 0,1 mg mercury or more. The intended resolution of the methods described in this standard is of the order of 5 %. Mercury level measurement of spent lamps is excluded, as during lamp operation, mercury gradually diffuses into the glass wall and reacts with the glass materials. The test method of this standard does not recover mercury that is diffused into or reacted with or otherwise incorporated irreversibly with the glass wall of discharge tubes. This standard does not contain information on measurement. Measurement is specified in IEC 62321.
Sample preparation for measurement of mercury level in fluorescent lamps
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2017-10-01
- 实施
Amendment 6 - Double-capped fluorescent lamps - Performance specifications
- ICS
- 29.140.30
- CCS
- 发布
- 2017-08-25
- 实施
Classification of fluorescent lamps by chromaticity and colour rendering property
- ICS
- 29.140.30
- CCS
- 发布
- 2017-08-25
- 实施
Classification of fluorescent lamps by chromaticity and colour rendering property
- ICS
- 29.140.30
- CCS
- 发布
- 2017-08-25
- 实施
Fluorescent lamps for general lighting service
- ICS
- 29.140.30
- CCS
- 发布
- 2017-08-25
- 实施
Metal halide lamps - Performance specification (IEC 61167:2015, modified); German version EN 61167:2016
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2017-04
- 实施
Single-capped fluorescent lamps -- Part 1: Safety specifications
- ICS
- 29.140.30
- CCS
- K71
- 发布
- 2017-02-20
- 实施
