29.140.99 有关灯的其他标准 标准查询与下载

KS C 7752-2019 智能照明控制系统第1-2部分:地址结构

Smart lighting control system — Part 1-2: Address structure

BS EN 62717:2017+A2:2019 用于普通照明的 LED 模块 性能要求

What is BS EN 62717‒ LED modules for general lighting about?    This International Standard specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. The following types of LED modules are defined; Type 1: Integrated LED Modules for use on d.c supplies up to 250V, or a.c supplies up to 1000V at 50 or 60Hz Type 2: LED module operating with part of separate controlgear connected to the mains and having further control inside (semi-integrated) for operation under constant voltage, constant current, or constant power. Type 3: LED modules where the complete controlgear is separate from the module (non-integrated) for operation under constant voltage, constant current, or constant power. This standard covers LED modules based on inorganic technology that produce white light. The requirements of this standard relate only to type testing. Instead of lifetime validation this standard has opted for lumen maintenance codes at a defined finite test time. Who is BS EN 62717 ‒ LED modules for general lighting for?    BS EN...

LED modules for general lighting. Performance requirements

IEC 62386-104:2019 数字可寻址照明接口第104部分:一般要求无线和替代有线系统组件

The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. This part of IEC 62386 applies to a system with wireless or alternative wired communication between its units@ instead of a wired bus system@ where the meaning of ??wireless or alternative wired communication??@ or in short ??telecommunication??@ is any type of communication network different from the wired system described in IEC 62386-101. Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts)@ it is in line with the requirements of IEC 61347 (all parts)@ with the addition of DC supplies. NOTE the definition of ??telecommunication?? applies only to this document and differs from the IEC Electropedia term in IEC 60050-701:1988@ 701-01-05.

Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components

IEC 63128:2019 调光照明控制接口-电子电流源控制装置的模拟电压调光接口

Lighting control interface for dimming – Analogue voltage dimming interface for electronic current sourcing controlgear

T/GZBC 12-2019 车载LED电子路牌技术要求

本标准规定了车载 LED 电子路牌的术语定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Car LED electronic road sign technical requirements

T/GDES 30-2019 道路、隧道照明用LED模块系列型谱

4 分类与模块结构代码 4.1 分类 4.2 产品代码编码定义 5 要求 5.1 总则 5.2 LED模块系列型谱

Series program for LED modules for road and tunnel lighting

T/CALI 0802-2019 多功能路灯技术规范

多功能路灯是一个综合了照明、计算、网络、物理环境的多维复杂系统，它将照明与通讯结合，与物联网融合，是一个横跨多个领域的新课题。目前没有一套统一的标准，在产品在应用过程中，出现无据可循，无法形成良好的产业推广；并且也不利于未来产品的互换，无评价标准的局面。因此，为了智慧照明行业健康发展，制定《多功能路灯技术规范》已经势在必行。 T/CALI 0802《多功能路灯技术规范》分为8个部分: ——第1部分：一般要求与试验； ——第2部分：管理服务平台要求与试验； ——第3部分：灯杆的一般要求和试验方法； ——第4部分：通信协议和公用通信接入功能要求与试验； ——第5部分：传感器要求与试验； ——第6部分：公共信息服务要求与试验； ——第7部分：摄像头要求与试验； ——第8部分：充电桩要求与试验。

Multifunctional Street Lighting System

T/CALI 0801-2019 电力线数字传输照明控制协议

本标准规定了电力线数字传输照明控制系统的一般要求、电气接口、数据时序、报文结构、报文类型、操作方法及测试方法。本标准规定的电力线数字传输照明控制的协议，旨在实现控制设备和控制装置之间的可互操作，包括但不限于：LED集成灯和具有外部控制装置的LED光源。本标准规定的电力线数字传输照明控制系统，利用现有布线，本标准所述的新设备，能很容易地替换传统开关，调光器和灯。

Digital load side transmission lighting control protocol

19/30392346 DC BS EN IEC 61347-1 片段 13、14 和 15 灯控制设备 第 1 部分：一般和安全要求

BS EN IEC 61347-1 Fragments 13, 14 and 15. Lamp controlgear - Part 1. General and safety requirements

IEC 60810:2017+AMD1:2019 CSV 道路车辆用灯具、光源和LED组件.性能要求

Lamps, light sources and LED packages for road vehicles - Performance requirements

IEC 60810:2017/AMD1:2019 道路车辆用灯具、光源和LED组件.性能要求

Lamps, light sources and LED packages for road vehicles - Performance requirements

T/CSA 039-2019 锂电池供电的LED太阳能路灯技术规范

本标准规定了锂电池供电的LED太阳能路灯的技术要求、试验方法、检测规则、标志、包装、运输、贮存。 本标准适用于以离网型太阳能光伏独立电源发电，适用低压直流方式驱动的锂电池供电LED太阳能路灯。

Solar street light with lithium battery technical specifications

T/CSA 050-2019 教室用LED照明系统 产品要求和测试方法

本标准规定了教室用LED照明系统的产品要求和测试要求，包括术语和定义、基本要求、产品视觉健康舒适度（VICO指数）测试要求、光生物安全要求、设备的维护和测试方法。 本标准适用于室内教育场所使用的LED照明灯具和照明系统。

LED Lighting System for Classrooms — Product Requirements and Testing Methods

T/CSA 051-2019 智能道路照明终端控制器接口要求

本标准规定了智能道路照明终端控制器与灯体、数字LED电源及中央管理系统的接口要求，包括术语和定义、系统概述、一般要求和接口要求。 本标准适用于基于窄带物联网（NB-IoT）的智能道路照明控制系统。 本标准适用于智能道路照明控制系统用的直流供电的外置式终端控制器。

Interface requirements for intelligent street lighting controller

T/GOTA 001-2019 LED护眼台灯

本标准规定了LED护眼台灯（以下简称 “台灯”）的术语和定义、要求、试验方法、测试报告、包装、运输、储存。 本标准适用于以LED为光源宣称“护眼”的台灯。

LED table lamp with eye protection function

IEC 62386-220:2019 数字可寻址照明接口.第220部分:控制装置的特殊要求.集中供电紧急操作（装置类型19）

Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19)

IEC 62717:2014/AMD2:2019 一般照明用LED模块.性能要求

LED modules for general lighting - Performance requirements

IEC 62717:2014+AMD1:2015+AMD2:2019 CSV 一般照明用LED模块.性能要求

LED modules for general lighting - Performance requirements

IEC 62717:2019 一般照明用LED模块.性能要求

This International Standard specifies the performance requirements for LED modules@ together with the test methods and conditions@ required to show compliance with this standard. The following types of LED modules are distinguished and schematically shown in Figure 1: Type 1: integrated LED modules for use on d.c. supplies up to 250 V or on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. Type 2: LED modules operating with part of separate controlgear connected to the mains voltage@ and having further control means inside (??semi-integrated??) for operation under constant voltage@ constant current or constant power. Type 3: LED modules where the complete controlgear is separate from the module (nonintegrated) for operation under constant voltage@ constant current or constant power. The power supply of the controlgear for semi-ballasted LED modules (Type 2) is an electronic device capable of controlling currents@ voltage or power within design limits. The control unit of the controlgear for semi-ballasted LED modules (Type 2) is an electronic device to control the electrical energy to the LEDs. A LED module with separate controlgear can be either a non-ballasted LED module or a semi-ballasted LED module.

LED modules for general lighting - Performance requirements

BS EN 62707-1:2014+A1:2018 LED 分级 适用于汽车应用的一般要求和白色网格

What is this standard about? This part of IEC 62707 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages intended for automotive applications. Other parts of the IEC 62707 series covering chromaticity of coloured LED packages, luminous flux/luminous intensity, colour rendering and forward voltage are in preparation or under consideration. NOTE 1 This International Standard does not apply for LED modules, LED lamps and LED luminaires. NOTE 2 Even though the words "white light" are used, the purpose of this International Standard is not to define "white light", but to specify a grid and a corresponding colour code for the colour binning of white LED packages emitting incoherent, visible radiation. The area covered by the grid may differ from the definition of white light given in other standards or regulations.

LED-binning - General requirements and white colour grid intended for automotive applications