29.140.99 有关灯的其他标准 标准查询与下载

IEC 62386-101:2014+AMD1:2018 CSV 数字可寻址照明接口第101部分:一般要求系统部件

Digital addressable lighting interface - Part 101: General requirements - System components

IEC 62386-101:2014/AMD1:2018 修改件1.数字可寻址照明接口.第101部分:一般要求.系统部件

Amendment 1 - Digital addressable lighting interface - Part 101: General requirements - System components

T/CSA 052-2018 基于窄带物联网（NB-IoT）道路照明智能控制系统技术规范

本规范规定了基于窄带物联网（NB-IoT）道路照明智能控制系统的总体要求、架构、单灯控制器、网络通信系统和中央管理系统以及系统调试与验收等。 本规范适用于新建、扩建和改建的城市道路、隧道、公路及与其相连的特定场所的照明系统，其它相关场所在技术条件相同时也可参考执行。

Technical specification for smart control system of road lighting based on Narrow Band Internet of Things (NB-IoT)

T/CIES 015-2017 基于窄带物联网（NB-IoT）的道路照明智能控制系统技术规范

Technical Specifications for Road Lighting Intelligent Control System Based on Narrowband Internet of Things (NB-IoT)

IEC 62442-3:2018 RLV 灯控制设备的能量性能.第3部分:卤钨灯和LED光源的控制设备.确定控制设备效率的测量方法

Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear

IEC 62442-2:2018 RLV 灯控制装置的能量性能.第2部分:高强度放电灯（荧光灯除外）用控制装置.测定控制装置效率的测量方法

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

IEC 62442-1:2018 灯控制装置的能量性能.第1部分:荧光灯控制装置.确定控制装置电路总输入功率和控制装置效率的测量方法

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear

IEC 62442-1:2018 RLV 灯控制设备的能量性能第1部分:荧光灯控制设备确定控制设备电路总输入功率和控制设备效率的测量方法

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear

IECQ 03-8-2018 IEC电子元器件质量评定体系 (IECQ体系). 程序规则. 第8部分: 发光二极管 (LED) 照明的IECQ方案

This publication contains the Rules of Procedure for the IECQ Scheme for LED Component Products Certification, which also includes other Solid-State Lighting (SSL) technologies. While this document refers to the IECQ Scheme for LED Component Products, it is intended that it includes other types of SSL technologies, including LED and OLED, from here on throughout the document referred to as LED lighting. NOTE LED is a technology and OLED is another. Perhaps in the future "PLED" may be common, i.e. a plastic or "printed LED". The IECQ Scheme for LED Component Products covers electronic components, associated materials and assemblies (including modules) for use within SSL application. These IECQ Scheme for LED Component Products Rules of Procedure are to be used in conjunction with applicable IECQ System management Basic Rules (IEC CA 01, IECQ 01-S), General Rules of Procedure (IECQ 03-1). This publication is based on the general Rules of Procedures for the Approved Component Scheme (IECQ 03-3) and includes changes or additions that relate specifically to the LED lighting industry, as such this publication takes precedence over IECQ 03-3. This publication may also be supplemented by IECQ Operational Documents (OD) as approved for use by the IECQ Management Committee, see www.iecq.org for latest publications.

IEC Quality Assessment System for Electronic Components (IECQ System) - Rules of Procedure - Part 8: IECQ Scheme for LED Lighting

EN IEC 62386-218:2018 数字可寻址照明接口 第218部分：控制装置的特殊要求 调光曲线选择（设备类型 17）

Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device type 17)

EN IEC 62386-217:2018 数字可寻址照明接口 第217部分：控制装置的特殊要求 热装置保护（设备类型 16）

Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)

IEC 62442-3:2018 灯具控制装置的能源性能.第3部分:卤素灯和LED光源控制装置.确定控制装置效率的测量方法

This part of IEC 62442 defines a measurement method for the power losses of electromagnetic transformers as well as the power losses and the standby power of electronic convertors for tungsten-halogen lamps and for LED light source(s). It is applicable for controlgear that are designed for use on DC supplies up to 1000 V and/or AC supplies up to 1000 V at 50 Hz or 60 Hz. A calculation method of the efficiency of the mentioned controlgear for tungsten-halogen lamps and LED light source(s) is also defined. This document applies to electrical controlgear-lamp circuits comprised solely of the controlgear and of the lamp(s) (LED light sources). For multipurpose power supplies only the lighting part will be considered. NOTE Requirements for testing individual controlgear during production are not included. This document specifies the measurement method for the total input power, the standby power and the calculation method of the controlgear efficiency for all controlgear sold for domestic and normal commercial purposes operating with tungsten-halogen lamps and LED light source(s). The term "LED light sources" includes LED modules and LED lamps. This document does not apply to: controlgear which form an integral part of lamps (LED light sources); controlgear circuits with capacitors connected in series; controllable electromagnetic controlgear.

Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear

EN 4731:2018 航空航天系列 与光致发光标记系统一起使用的 LED 灯具的光谱质量

Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems

IEC PAS 63166:2018 Zhaga接口规范第1册和第7册

Zhaga interface specification Book 1 and Book 7

IEC 62386-216:2018 数字可编址照明接口 - 第216部分:控制装置的特殊要求 - 负载参考（装置类型15）

Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)

IEC 62386-207:2018 数字可寻址照明接口第207部分:控制装置 - LED模块的特殊要求（设备类型6）

Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

IEC 62386-333:2018 数字可寻址照明接口.第333部分:控制装置的特殊要求.手动配置（特性类型33）

Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33)

IEC 62386-222:2018 数字可寻址照明接口 - 第222部分:控制装置的特殊要求 - 热敏灯保护（21型装置）

Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)

EN IEC 61347-2-14:2018 灯控制装置 第 2-14 部分：荧光感应灯的直流和/或交流供电电子控制装置的特殊要求

Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps

DIN EN 62717:2018 普通照明用LED模块.性能要求(IEC 62717-2014, 修改+ A1-2015, 修改);德文版本EN 62717-2017

This International Standard specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. The following types of LED modules are distinguished: Type 1: integrated LED modules for use on d.c. supplies up to 250 V or on a.c. supplies up to 1000 V at 50 Hz or 60 Hz. Type 2: LED modules operating with part of separate controlgear connected to the mains voltage, and having further control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power. Type 3: LED modules where the complete controlgear is separate from the module (nonintegrated) for operation under constant voltage, constant current or constant power.

LED modules for general lighting - Performance requirements (IEC 62717:2014, modified + A1:2015, modified); German version EN 62717:2017