29.140.99 有关灯的其他标准 标准查询与下载

T/CSA 044-2017 道路照明现场动态测量方法

本标准适用于户外道路照明质量的现场动态测量。

Road lighting scene dynamic measurement method

IEC 61347-1:2015/AMD1:2017 灯控装置.第1部分:一般安全要求.修改件1

Replace the first paragraph with the following new text: This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 1000 V and/or a.c. supplies up to 1000 V at 50 Hz or 60 Hz.

Lamp controlgear - Part 1: General and safety requirements; Amendment 1

IEC 61347-1:2017 灯控装置.第1部分:一般安全要求

This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 2501000 V and/or a.c. supplies up to 1000 V at 50 Hz or 60 Hz. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included. Requirements for semi-luminaires are given in IEC 60598-1:2014 (see definition 0). Particular requirements for controlgears providing safety extra low voltage (from now on SELV) are given in Annex L. It can be expected that lamp control gear which comply with this standard will not compromise safety between 90 % and 110 % of their rated supply voltage in independent use and when operated in luminaires complying with the safety standard IEC 60598-1 and the relevant part IEC 60598-2-xx and with lamps complying with the relevant lamp standards. Performance requirements may require tighter limits.

Lamp controlgear - Part 1: General and safety requirements

IEC 61347-2-11:2001+AMD1:2017 CSV 灯具控制设备第2-11部分:灯具用其他电子电路的特殊要求

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires

IEC 61347-2-11:2017 灯的控制装置.第2-11部分：与灯具同用的各种电子电路的特殊要求

This part of IEC 61347 specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 2501000 V. This part of IEC 61347 does not apply to circuits or devices for which specific IEC standards are published. NOTE Examples of miscellaneous electronic circuits used with luminaires are electronic ballast control circuits; switching circuits used in association with daylight and/or presence sensors; circuits to assist EMC performance; intermittence and similar devices used with lighting chains; earth leakage or open-circuit protective devices used with neon transformers.

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires

IEC 61347-2-11:2001/AMD1:2017 灯的控制装置.第2-11部分：与灯具同用的各种电子电路的特殊要求.修改件1

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires; Amendment 1

EN 62717:2017 普通照明用 LED 模块 性能要求

LED modules for general lighting - Performance requirements

IEC 63013:2017 LED包. 长期发光和辐射通量维护投影

This document is applicable to LED packages for general lighting services. It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used. These projection methods employ data collected as per ANSI/IES LM-80-15 (LM-80). The long-term projection is based on the exponential-fit-function procedure of IES TM-21-11 (TM-21), and gives an alternative border function procedure in the case where the exponential-fit-function of IES TM-21-11 is not applicable.

LED packages - Long-term luminous and radiant flux maintenance projection

T/CSA 040-2017 家居智能照明设备无线通信模块接口规范

制定本标准的目的是将家居智能照明设备无线通信模块接口标准化，以促进智能化家居照明控制系统向标准化、可替换、适用范围广的方向发展。标准化内容包括家居智能照明设备无线通信模块接口定义、技术要求、设计规范、测试方法等。

Interface specification for wireless communication module of smart home

T/CSA 041-2017 家居智能照明设备功能属性规范

制定本标准的目的是将家居智能照明设备功能属性标准化，以促进智能化家居照明控制系统向标准化、可替换、适用范围广的方向发展。标准化内容包括家居智能照明设备特定功能的各项属性的定义、分类和基本要求

Specification for functional properties of smart home lighting equipment

IEC 62386-303:2017 数字可寻址照明接口 - 第303部分:特殊要求 - 输入设备 - 占用传感器

This part of IEC 62386 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347@ with the addition of DC supplies This document is only applicable to IEC 62386-103:2014 and IEC 62386103: 2014/AMD1:?? input devices that deliver occupancy information to the lighting control system through movement or presence sensing NOTE Requirements for testing individual products during production are not included

Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor

T/CSA 036-2017 户外道路与隧道LED照明非集成式控制装置与控制终端接口要求

制定本标准目的是将户外道路与隧道LED照明非集成式控制装置与智能系统中的控制终端之间电气和机械接口标准化，以促进智能化户外照明控制系统向模块化、标准化、可替换、适用范围广的方向发展。标准化内容包括LED控制装置与控制终端之间控制信号电压、电流、对应曲线和机械接口。

Interface requirements of non-integrated control gear and controller for outdoor street and tunnel LED lighting

DB35/T 1648-2017 普通照明光闪烁测试方法

本标准规定了普通照明产品产生的光闪烁测试方法。 本标准适用于在家庭和类似场合、把稳定燃点集成为一体的普通照明产品产生的光闪烁的测试，包括普通照明用自镇流荧光灯和LED照明产品；其他用途的普通照明产品也可参照使用。

General lighting light flicker test method

DIN EN 61347-1 Berichtigung 1:2017 灯具控制设备. 第1部分: 通用和安全要求(IEC 61347-1-2015); 德文版本EN 61347-1-2015, DIN EN 61347-1 (VDE 0712-30)-2016-05勘误表

Lamp controlgear - Part 1: General and safety requirements (IEC 61347-1:2015); German version EN 61347-1:2015, Corrigendum to DIN EN 61347-1 (VDE 0712-30):2016-05

EN 61347-2-3:2011/A1:2017 灯的控制装置.第2-3部分:荧光灯用交流电子镇流器的特殊要求 包含修改件A1,2017

IEC 61347-2-3:2011 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. This second edition cancels and replaces the first edition published in 2000, its Amendment 1 (2004) and its Amendment 2 (2006), IEC 61347-2-4 published in 2000, IEC 61347-2-5 published in 2000 and IEC 61347-2-6 published in 2000. This second edition constitutes a technical revision. The significant revisions with respect to the first edition are: - rectifying test conditions when dimming; - construction requirements; - measurement circuits and limits for HF leakage currents; - modification of the structure to become a standard exclusively for a.c. and d.c. central supplied electronic control gear for general lighting and Annex J cover centrally- supplied emergency control gear. This publication is to be read in conjunction with IEC 61347-1:2007. The contents of the corrigendum of September 2011 have been included in this copy.

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

T/CSA 035.3-2017 LED照明产品视觉健康舒适度测试 第3部分：测试方法-基于眼底功能的测试方法及技术要求

本标准规定了LED光源及相关照明和大屏幕显示产品对于人眼视网膜光化学损伤的定量测试方法和技术要求。

LED products-Test of visual healthy and comfort Part 3：Test method and technological requirements basing on fundus effect

T/CSA 035.2-2017 LED照明产品视觉健康舒适度测试 第2部分：测试方法-基于人眼生理功能的测试方法及技术要求

本标准是针对LED照明产品对视觉健康的影响，基于人眼生理功能的测试方法和技术要求；该标准可用于评价LED照明产品对人眼生理功能和视觉疲劳变化的影响。

LED products——Test of Visual Health and Comfort Part2：Test Method and Technological Requirements Basing on Physiological Function of Human Eyes

BS PD IEC/TS 62861:2017 发光二极管(LED)光源和发光二极管(LED)灯具的主要组件可靠性试验指南

Guidelines for principal component reliability testing for LED light sources and LED luminaires

T/CSA 043-2017 室内LED照明质量现场测量方法及评价指标

本标准针对LED光源的特性，对室内照明现场的各项技术指标要求和试验方法做出了明确规定，可更好地指导室内LED照明产品生产企业和使用方正确地生产或选择适合的LED照明产品，更好地发挥LED高效节能长寿命的优势，促进LED照明产业整体良性地发展。

LED lighting quality measurement and evaluation for indoor

T/CSA 042-2017 LED道路照明质量现场测量方法及评价指标

本标准针对LED路灯的特性，对道路照明现场的各项技术指标要求和试验方法做出了明确规定，可更好地指导LED道路照明产品生产企业和使用方正确地生产或选择适合的LED道路照明产品，更好地发挥LED高效节能长寿命的优势，促进LED照明产业整体良性地发展。

LED road lighting quality measurement and evaluation