共找到 1223 条与 有关灯的其他标准 相关的标准,共 82 页
LED路灯和LED隧道灯
Simulation evaluation and calculation method of LED street lamp tunnel lighting application effect
城市LED路灯智能管理的新建、扩建、改建工程,园区、隧道、桥梁、太阳能灯的公共照明智能化改造工程也可参照执行
Evaluation method of LED street lamp intelligent management system
考核和确定产品在高温、低温环境条件下贮存和(或)使用的适用性
Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps
在照明领域LED测试用的分布光度测试系统的校准,其他用途的分布光度测试系统可参照使用
Calibration methods for LED test instruments Part 2: Goniophotometric test systems
IEC/PAS 62816-2:2013(E) specifies the performance requirements for tubular type external electrode fluorescent lamps for backlight unit purposes used in flat panel displays such as TVs and monitors, etc., hereafter called "lamps". The PAS will be revised to include other types of lamp when a need for them is recognized.
External electrode fluorescent lamps - Part 2: Performance specifications
IEC 62868:2014 specifies the safety requirements of OLED tiles and panels for use on d.c. supplies up to 120 V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purpose.
Organic light emitting diode (OLED) panels for general lighting - Safety requirements
General lighting. Organic light emitting diode (OLED) products and related equipment. Terms and definitions
LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications (IEC 62838:2015); German version EN 62838:2016
General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions
Amendment 1 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
Digital load side transmission lighting control - Part 1: Basic requirements (IEC 62756-1:2015); German version EN 62756-1:2015
本标准规定了LED 植物生长灯(以下简称“植物灯”)的术语和定义、产品分类及型号、技术要求、 试验方法、检验规则及标志、包装、运输、贮存等要求。 本标准适用于使用LED 为光源的组培灯和补光灯。
LED Grow Light Technical Specifications
CSA 035的本部分: ——介绍涉及LED照明产品-视觉健康舒适度的多部分标准; ——对CSA 035的预期内容进行概略描述; ——阐述如何报告对CSA 035的符合性。 本标准规定了LED照明产品的视觉健康舒适度评测要求,适用于室内、室外照明用LED灯、如:LED台灯、LED筒灯、LED射灯、LED路灯等。
LED products-Test of visual healthy and comfort Part1:General introduction
本标准规定了LED远程荧光粉器件(以下简称“器件”)的定义和术语、技术要求、试验方法、检验规则、标志、包装、运输、贮存等。
LED Remote phosphor components
Programmable components in electronic lamp controlgear - General and safety requirements (IEC 62733:2015); German version EN 62733:2015
本标准规定了1 000 V以下、50 Hz交流供电的单端金属卤化物灯(钪钠系列)用LC顶峰超前式镇流器的术语和定义、分类和命名、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于GB/T 18661规定的175 W、250 W、360 W、400 W、1 000 W、1 500 W单端钪钠系列金属卤化物灯(脉冲启动类型不适用)用LC顶峰超前式镇流器(以下简称“镇流器”)。
Single-ended metal halide lamps (ScI3-NaI series) with LC peak lead ballasts.Performance requirements
LED modules for general lighting. Safety specifications
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号